i2c: davinci: kill platform data

There are no more board file users of this driver. The platform data
structure is only used internally. Two of the four fields it stores are
not used at all anymore. Pull the remainder into the driver data struct
and shrink code by removing parts that are now dead code.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20241211102337.37956-1-brgl@bgdev.pl
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

2 files changed, 19 insertions, 91 deletions

diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index 71dc0a6688b7..4b499931fdfd 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -26,7 +26,6 @@
 #include <linux/cpufreq.h>
 #include <linux/gpio/consumer.h>
 #include <linux/of.h>
-#include <linux/platform_data/i2c-davinci.h>
 #include <linux/pm_runtime.h>
 
 /* ----- global defines ----------------------------------------------- */
@@ -117,6 +116,8 @@
 /* timeout for pm runtime autosuspend */
 #define DAVINCI_I2C_PM_TIMEOUT	1000	/* ms */
 
+#define DAVINCI_I2C_DEFAULT_BUS_FREQ	100
+
 struct davinci_i2c_dev {
 	struct device           *dev;
 	void __iomem		*base;
@@ -132,13 +133,10 @@ struct davinci_i2c_dev {
 #ifdef CONFIG_CPU_FREQ
 	struct notifier_block	freq_transition;
 #endif
-	struct davinci_i2c_platform_data *pdata;
-};
-
-/* default platform data to use if not supplied in the platform_device */
-static struct davinci_i2c_platform_data davinci_i2c_platform_data_default = {
-	.bus_freq	= 100,
-	.bus_delay	= 0,
+	/* standard bus frequency (kHz) */
+	unsigned int		bus_freq;
+	/* Chip has a ICPFUNC register */
+	bool			has_pfunc;
 };
 
 static inline void davinci_i2c_write_reg(struct davinci_i2c_dev *i2c_dev,
@@ -168,7 +166,6 @@ static inline void davinci_i2c_reset_ctrl(struct davinci_i2c_dev *i2c_dev,
 
 static void i2c_davinci_calc_clk_dividers(struct davinci_i2c_dev *dev)
 {
-	struct davinci_i2c_platform_data *pdata = dev->pdata;
 	u16 psc;
 	u32 clk;
 	u32 d;
@@ -212,16 +209,16 @@ static void i2c_davinci_calc_clk_dividers(struct davinci_i2c_dev *dev)
 	if (of_node && of_device_is_compatible(of_node, "ti,keystone-i2c"))
 		d = 6;
 
-	clk = ((input_clock / (psc + 1)) / (pdata->bus_freq * 1000));
+	clk = ((input_clock / (psc + 1)) / (dev->bus_freq * 1000));
 	/* Avoid driving the bus too fast because of rounding errors above */
-	if (input_clock / (psc + 1) / clk > pdata->bus_freq * 1000)
+	if (input_clock / (psc + 1) / clk > dev->bus_freq * 1000)
 		clk++;
 	/*
 	 * According to I2C-BUS Spec 2.1, in FAST-MODE LOW period should be at
 	 * least 1.3uS, which is not the case with 50% duty cycle. Driving HIGH
 	 * to LOW ratio as 1 to 2 is more safe.
 	 */
-	if (pdata->bus_freq > 100)
+	if (dev->bus_freq > 100)
 		clkl = (clk << 1) / 3;
 	else
 		clkl = (clk >> 1);
@@ -255,8 +252,6 @@ static void i2c_davinci_calc_clk_dividers(struct davinci_i2c_dev *dev)
  */
 static int i2c_davinci_init(struct davinci_i2c_dev *dev)
 {
-	struct davinci_i2c_platform_data *pdata = dev->pdata;
-
 	/* put I2C into reset */
 	davinci_i2c_reset_ctrl(dev, 0);
 
@@ -274,8 +269,7 @@ static int i2c_davinci_init(struct davinci_i2c_dev *dev)
 		davinci_i2c_read_reg(dev, DAVINCI_I2C_CLKL_REG));
 	dev_dbg(dev->dev, "CLKH = %d\n",
 		davinci_i2c_read_reg(dev, DAVINCI_I2C_CLKH_REG));
-	dev_dbg(dev->dev, "bus_freq = %dkHz, bus_delay = %d\n",
-		pdata->bus_freq, pdata->bus_delay);
+	dev_dbg(dev->dev, "bus_freq = %dkHz\n", dev->bus_freq);
 
 
 	/* Take the I2C module out of reset: */
@@ -309,12 +303,6 @@ static void davinci_i2c_unprepare_recovery(struct i2c_adapter *adap)
 	i2c_davinci_init(dev);
 }
 
-static struct i2c_bus_recovery_info davinci_i2c_gpio_recovery_info = {
-	.recover_bus = i2c_generic_scl_recovery,
-	.prepare_recovery = davinci_i2c_prepare_recovery,
-	.unprepare_recovery = davinci_i2c_unprepare_recovery,
-};
-
 static void davinci_i2c_set_scl(struct i2c_adapter *adap, int val)
 {
 	struct davinci_i2c_dev *dev = i2c_get_adapdata(adap);
@@ -414,7 +402,6 @@ static int
 i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop)
 {
 	struct davinci_i2c_dev *dev = i2c_get_adapdata(adap);
-	struct davinci_i2c_platform_data *pdata = dev->pdata;
 	u32 flag;
 	u16 w;
 	unsigned long time_left;
@@ -424,10 +411,6 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop)
 		return -EADDRNOTAVAIL;
 	}
 
-	/* Introduce a delay, required for some boards (e.g Davinci EVM) */
-	if (pdata->bus_delay)
-		udelay(pdata->bus_delay);
-
 	/* set the target address */
 	davinci_i2c_write_reg(dev, DAVINCI_I2C_SAR_REG, msg->addr);
 
@@ -758,8 +741,8 @@ static int davinci_i2c_probe(struct platform_device *pdev)
 {
 	struct davinci_i2c_dev *dev;
 	struct i2c_adapter *adap;
-	struct i2c_bus_recovery_info *rinfo;
 	int r, irq;
+	u32 prop;
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0)
@@ -773,29 +756,15 @@ static int davinci_i2c_probe(struct platform_device *pdev)
 
 	dev->dev = &pdev->dev;
 	dev->irq = irq;
-	dev->pdata = dev_get_platdata(&pdev->dev);
 	platform_set_drvdata(pdev, dev);
 
-	if (!dev->pdata && pdev->dev.of_node) {
-		u32 prop;
-
-		dev->pdata = devm_kzalloc(&pdev->dev,
-			sizeof(struct davinci_i2c_platform_data), GFP_KERNEL);
-		if (!dev->pdata)
-			return -ENOMEM;
-
-		memcpy(dev->pdata, &davinci_i2c_platform_data_default,
-			sizeof(struct davinci_i2c_platform_data));
-		if (!of_property_read_u32(pdev->dev.of_node, "clock-frequency",
-			&prop))
-			dev->pdata->bus_freq = prop / 1000;
-
-		dev->pdata->has_pfunc =
-			of_property_read_bool(pdev->dev.of_node,
-					      "ti,has-pfunc");
-	} else if (!dev->pdata) {
-		dev->pdata = &davinci_i2c_platform_data_default;
-	}
+	r = device_property_read_u32(&pdev->dev, "clock-frequency", &prop);
+	if (r)
+		prop = DAVINCI_I2C_DEFAULT_BUS_FREQ;
+
+	dev->bus_freq = prop / 1000;
+
+	dev->has_pfunc = device_property_present(&pdev->dev, "ti,has-pfunc");
 
 	dev->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(dev->clk))
@@ -843,23 +812,8 @@ static int davinci_i2c_probe(struct platform_device *pdev)
 	adap->timeout = DAVINCI_I2C_TIMEOUT;
 	adap->dev.of_node = pdev->dev.of_node;
 
-	if (dev->pdata->has_pfunc)
+	if (dev->has_pfunc)
 		adap->bus_recovery_info = &davinci_i2c_scl_recovery_info;
-	else if (dev->pdata->gpio_recovery) {
-		rinfo =  &davinci_i2c_gpio_recovery_info;
-		adap->bus_recovery_info = rinfo;
-		rinfo->scl_gpiod = devm_gpiod_get(&pdev->dev, "scl",
-						  GPIOD_OUT_HIGH_OPEN_DRAIN);
-		if (IS_ERR(rinfo->scl_gpiod)) {
-			r = PTR_ERR(rinfo->scl_gpiod);
-			goto err_unuse_clocks;
-		}
-		rinfo->sda_gpiod = devm_gpiod_get(&pdev->dev, "sda", GPIOD_IN);
-		if (IS_ERR(rinfo->sda_gpiod)) {
-			r = PTR_ERR(rinfo->sda_gpiod);
-			goto err_unuse_clocks;
-		}
-	}
 
 	adap->nr = pdev->id;
 	r = i2c_add_numbered_adapter(adap);
diff --git a/include/linux/platform_data/i2c-davinci.h b/include/linux/platform_data/i2c-davinci.h
deleted file mode 100644
index 98967df07468..000000000000
--- a/include/linux/platform_data/i2c-davinci.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * DaVinci I2C controller platform_device info
- *
- * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
-*/
-
-#ifndef __ASM_ARCH_I2C_H
-#define __ASM_ARCH_I2C_H
-
-/* All frequencies are expressed in kHz */
-struct davinci_i2c_platform_data {
-	unsigned int	bus_freq;	/* standard bus frequency (kHz) */
-	unsigned int	bus_delay;	/* post-transaction delay (usec) */
-	bool		gpio_recovery;	/* Use GPIO recovery method */
-	bool		has_pfunc;	/* Chip has a ICPFUNC register */
-};
-
-/* for board setup code */
-void davinci_init_i2c(struct davinci_i2c_platform_data *);
-
-#endif /* __ASM_ARCH_I2C_H */