diff options
| -rw-r--r-- | drivers/i2c/busses/i2c-davinci.c | 84 | ||||
| -rw-r--r-- | include/linux/platform_data/i2c-davinci.h | 26 |
2 files changed, 19 insertions, 91 deletions
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c index 71dc0a6688b7..4b499931fdfd 100644 --- a/drivers/i2c/busses/i2c-davinci.c +++ b/drivers/i2c/busses/i2c-davinci.c @@ -26,7 +26,6 @@ #include <linux/cpufreq.h> #include <linux/gpio/consumer.h> #include <linux/of.h> -#include <linux/platform_data/i2c-davinci.h> #include <linux/pm_runtime.h> /* ----- global defines ----------------------------------------------- */ @@ -117,6 +116,8 @@ /* timeout for pm runtime autosuspend */ #define DAVINCI_I2C_PM_TIMEOUT 1000 /* ms */ +#define DAVINCI_I2C_DEFAULT_BUS_FREQ 100 + struct davinci_i2c_dev { struct device *dev; void __iomem *base; @@ -132,13 +133,10 @@ struct davinci_i2c_dev { #ifdef CONFIG_CPU_FREQ struct notifier_block freq_transition; #endif - struct davinci_i2c_platform_data *pdata; -}; - -/* default platform data to use if not supplied in the platform_device */ -static struct davinci_i2c_platform_data davinci_i2c_platform_data_default = { - .bus_freq = 100, - .bus_delay = 0, + /* standard bus frequency (kHz) */ + unsigned int bus_freq; + /* Chip has a ICPFUNC register */ + bool has_pfunc; }; static inline void davinci_i2c_write_reg(struct davinci_i2c_dev *i2c_dev, @@ -168,7 +166,6 @@ static inline void davinci_i2c_reset_ctrl(struct davinci_i2c_dev *i2c_dev, static void i2c_davinci_calc_clk_dividers(struct davinci_i2c_dev *dev) { - struct davinci_i2c_platform_data *pdata = dev->pdata; u16 psc; u32 clk; u32 d; @@ -212,16 +209,16 @@ static void i2c_davinci_calc_clk_dividers(struct davinci_i2c_dev *dev) if (of_node && of_device_is_compatible(of_node, "ti,keystone-i2c")) d = 6; - clk = ((input_clock / (psc + 1)) / (pdata->bus_freq * 1000)); + clk = ((input_clock / (psc + 1)) / (dev->bus_freq * 1000)); /* Avoid driving the bus too fast because of rounding errors above */ - if (input_clock / (psc + 1) / clk > pdata->bus_freq * 1000) + if (input_clock / (psc + 1) / clk > dev->bus_freq * 1000) clk++; /* * According to I2C-BUS Spec 2.1, in FAST-MODE LOW period should be at * least 1.3uS, which is not the case with 50% duty cycle. Driving HIGH * to LOW ratio as 1 to 2 is more safe. */ - if (pdata->bus_freq > 100) + if (dev->bus_freq > 100) clkl = (clk << 1) / 3; else clkl = (clk >> 1); @@ -255,8 +252,6 @@ static void i2c_davinci_calc_clk_dividers(struct davinci_i2c_dev *dev) */ static int i2c_davinci_init(struct davinci_i2c_dev *dev) { - struct davinci_i2c_platform_data *pdata = dev->pdata; - /* put I2C into reset */ davinci_i2c_reset_ctrl(dev, 0); @@ -274,8 +269,7 @@ static int i2c_davinci_init(struct davinci_i2c_dev *dev) davinci_i2c_read_reg(dev, DAVINCI_I2C_CLKL_REG)); dev_dbg(dev->dev, "CLKH = %d\n", davinci_i2c_read_reg(dev, DAVINCI_I2C_CLKH_REG)); - dev_dbg(dev->dev, "bus_freq = %dkHz, bus_delay = %d\n", - pdata->bus_freq, pdata->bus_delay); + dev_dbg(dev->dev, "bus_freq = %dkHz\n", dev->bus_freq); /* Take the I2C module out of reset: */ @@ -309,12 +303,6 @@ static void davinci_i2c_unprepare_recovery(struct i2c_adapter *adap) i2c_davinci_init(dev); } -static struct i2c_bus_recovery_info davinci_i2c_gpio_recovery_info = { - .recover_bus = i2c_generic_scl_recovery, - .prepare_recovery = davinci_i2c_prepare_recovery, - .unprepare_recovery = davinci_i2c_unprepare_recovery, -}; - static void davinci_i2c_set_scl(struct i2c_adapter *adap, int val) { struct davinci_i2c_dev *dev = i2c_get_adapdata(adap); @@ -414,7 +402,6 @@ static int i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop) { struct davinci_i2c_dev *dev = i2c_get_adapdata(adap); - struct davinci_i2c_platform_data *pdata = dev->pdata; u32 flag; u16 w; unsigned long time_left; @@ -424,10 +411,6 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop) return -EADDRNOTAVAIL; } - /* Introduce a delay, required for some boards (e.g Davinci EVM) */ - if (pdata->bus_delay) - udelay(pdata->bus_delay); - /* set the target address */ davinci_i2c_write_reg(dev, DAVINCI_I2C_SAR_REG, msg->addr); @@ -758,8 +741,8 @@ static int davinci_i2c_probe(struct platform_device *pdev) { struct davinci_i2c_dev *dev; struct i2c_adapter *adap; - struct i2c_bus_recovery_info *rinfo; int r, irq; + u32 prop; irq = platform_get_irq(pdev, 0); if (irq < 0) @@ -773,29 +756,15 @@ static int davinci_i2c_probe(struct platform_device *pdev) dev->dev = &pdev->dev; dev->irq = irq; - dev->pdata = dev_get_platdata(&pdev->dev); platform_set_drvdata(pdev, dev); - if (!dev->pdata && pdev->dev.of_node) { - u32 prop; - - dev->pdata = devm_kzalloc(&pdev->dev, - sizeof(struct davinci_i2c_platform_data), GFP_KERNEL); - if (!dev->pdata) - return -ENOMEM; - - memcpy(dev->pdata, &davinci_i2c_platform_data_default, - sizeof(struct davinci_i2c_platform_data)); - if (!of_property_read_u32(pdev->dev.of_node, "clock-frequency", - &prop)) - dev->pdata->bus_freq = prop / 1000; - - dev->pdata->has_pfunc = - of_property_read_bool(pdev->dev.of_node, - "ti,has-pfunc"); - } else if (!dev->pdata) { - dev->pdata = &davinci_i2c_platform_data_default; - } + r = device_property_read_u32(&pdev->dev, "clock-frequency", &prop); + if (r) + prop = DAVINCI_I2C_DEFAULT_BUS_FREQ; + + dev->bus_freq = prop / 1000; + + dev->has_pfunc = device_property_present(&pdev->dev, "ti,has-pfunc"); dev->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(dev->clk)) @@ -843,23 +812,8 @@ static int davinci_i2c_probe(struct platform_device *pdev) adap->timeout = DAVINCI_I2C_TIMEOUT; adap->dev.of_node = pdev->dev.of_node; - if (dev->pdata->has_pfunc) + if (dev->has_pfunc) adap->bus_recovery_info = &davinci_i2c_scl_recovery_info; - else if (dev->pdata->gpio_recovery) { - rinfo = &davinci_i2c_gpio_recovery_info; - adap->bus_recovery_info = rinfo; - rinfo->scl_gpiod = devm_gpiod_get(&pdev->dev, "scl", - GPIOD_OUT_HIGH_OPEN_DRAIN); - if (IS_ERR(rinfo->scl_gpiod)) { - r = PTR_ERR(rinfo->scl_gpiod); - goto err_unuse_clocks; - } - rinfo->sda_gpiod = devm_gpiod_get(&pdev->dev, "sda", GPIOD_IN); - if (IS_ERR(rinfo->sda_gpiod)) { - r = PTR_ERR(rinfo->sda_gpiod); - goto err_unuse_clocks; - } - } adap->nr = pdev->id; r = i2c_add_numbered_adapter(adap); diff --git a/include/linux/platform_data/i2c-davinci.h b/include/linux/platform_data/i2c-davinci.h deleted file mode 100644 index 98967df07468..000000000000 --- a/include/linux/platform_data/i2c-davinci.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * DaVinci I2C controller platform_device info - * - * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com> - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. -*/ - -#ifndef __ASM_ARCH_I2C_H -#define __ASM_ARCH_I2C_H - -/* All frequencies are expressed in kHz */ -struct davinci_i2c_platform_data { - unsigned int bus_freq; /* standard bus frequency (kHz) */ - unsigned int bus_delay; /* post-transaction delay (usec) */ - bool gpio_recovery; /* Use GPIO recovery method */ - bool has_pfunc; /* Chip has a ICPFUNC register */ -}; - -/* for board setup code */ -void davinci_init_i2c(struct davinci_i2c_platform_data *); - -#endif /* __ASM_ARCH_I2C_H */ |