Merge tag 'qcom-arm64-for-6.3-3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

Last set of Qualcomm ARM64 DTS updates for v6.3

This introduces additional DisplayPort controllers and pmic_glink on
SC8280XP (8cx Gen3), which provides support for USB Type-C-based
displays on the the Lenovo ThinkPad X13s and the compute reference
device. The pmic_glink also provides battery and power supply status.

Interrupt-parents are corrected across the SC8280XP PMICs, to allow
non-Linux OSs to properly handle interrupts in the various blocks
therein.

It cleans up the SM8350 base dtsi and introduces GPU support on this
platform, as well as enable this for the Hardware Development Kit (HDK).
It enables i2c busses on the Fairphone FP4

Lastly it aligns glink node names with bindings across a few platforms,
and corrects the compatible for the PON block in the pmk8350 PMIC.

* tag 'qcom-arm64-for-6.3-3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  arm64: dts: qcom: msm8996: align RPM G-Link clock-controller node with bindings
  arm64: dts: qcom: qcs404: align RPM G-Link node with bindings
  arm64: dts: qcom: ipq6018: align RPM G-Link node with bindings
  arm64: dts: qcom: sm8550: remove invalid interconnect property from cryptobam
  arm64: dts: qcom: sc7280: Adjust zombie PWM frequency
  arm64: dts: qcom: sc8280xp-pmics: Specify interrupt parent explicitly
  arm64: dts: qcom: sm7225-fairphone-fp4: enable remaining i2c busses
  arm64: dts: qcom: sm7225-fairphone-fp4: move status property down
  arm64: dts: qcom: pmk8350: Use the correct PON compatible
  arm64: dts: qcom: sc8280xp-x13s: Enable external display
  arm64: dts: qcom: sc8280xp-crd: Introduce pmic_glink
  arm64: dts: qcom: sc8280xp: Add USB-C-related DP blocks
  arm64: dts: qcom: sm8350-hdk: enable GPU
  arm64: dts: qcom: sm8350: add GPU, GMU, GPU CC and SMMU nodes
  arm64: dts: qcom: sm8350: finish reordering nodes
  arm64: dts: qcom: sm8350: move more nodes to correct place
  arm64: dts: qcom: sm8350: reorder device nodes

Link: https://lore.kernel.org/r/20230215051530.1165953-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

13 files changed, 1519 insertions, 753 deletions

diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index d32c9b2515ee..bbd94025ff5d 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -176,7 +176,7 @@
 		qcom,rpm-msg-ram = <&rpm_msg_ram>;
 		mboxes = <&apcs_glb 0>;
 
-		rpm_requests: glink-channel {
+		rpm_requests: rpm-requests {
 			compatible = "qcom,rpm-ipq6018";
 			qcom,glink-channels = "rpm_requests";
 
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 6f180a8efe77..905678e7175d 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -483,7 +483,7 @@
 			compatible = "qcom,rpm-msm8996";
 			qcom,glink-channels = "rpm_requests";
 
-			rpmcc: qcom,rpmcc {
+			rpmcc: clock-controller {
 				compatible = "qcom,rpmcc-msm8996", "qcom,rpmcc";
 				#clock-cells = <1>;
 				clocks = <&xo_board>;
diff --git a/arch/arm64/boot/dts/qcom/pmk8350.dtsi b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
index 32f5e6af8c11..f26fb7d32faf 100644
--- a/arch/arm64/boot/dts/qcom/pmk8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
@@ -21,7 +21,7 @@
 		#size-cells = <0>;
 
 		pmk8350_pon: pon@1300 {
-			compatible = "qcom,pm8998-pon";
+			compatible = "qcom,pmk8350-pon";
 			reg = <0x1300>, <0x800>;
 			reg-names = "hlos", "pbs";
 
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index 9c9890cf1b10..bc2ed73afb74 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -223,7 +223,7 @@
 		qcom,rpm-msg-ram = <&rpm_msg_ram>;
 		mboxes = <&apcs_glb 0>;
 
-		rpm_requests: glink-channel {
+		rpm_requests: rpm-requests {
 			compatible = "qcom,rpm-qcs404";
 			qcom,glink-channels = "rpm_requests";
 
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dtsi
index 64deaaabac0f..a4fde22e3355 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dtsi
@@ -61,8 +61,8 @@ ap_tp_i2c: &i2c0 {
 };
 
 &pm8350c_pwm_backlight {
-	/* Set the PWM period to 200 microseconds (5kHz duty cycle) */
-	pwms = <&pm8350c_pwm 3 200000>;
+	/* Set the PWM period to 320 microseconds (3.125kHz frequency) */
+	pwms = <&pm8350c_pwm 3 320000>;
 };
 
 &pwmleds {
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
index 2179c06b4e3b..98a0f1f9f01e 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
@@ -36,6 +36,84 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	pmic-glink {
+		compatible = "qcom,sc8280xp-pmic-glink", "qcom,pmic-glink";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_con0_hs: endpoint {
+						remote-endpoint = <&usb_0_role_switch>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_con0_ss: endpoint {
+						remote-endpoint = <&mdss0_dp0_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_con0_sbu: endpoint {
+						remote-endpoint = <&usb0_sbu_mux>;
+					};
+				};
+			};
+		};
+
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_con1_hs: endpoint {
+						remote-endpoint = <&usb_1_role_switch>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_con1_ss: endpoint {
+						remote-endpoint = <&mdss0_dp1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_con1_sbu: endpoint {
+						remote-endpoint = <&usb1_sbu_mux>;
+					};
+				};
+			};
+		};
+	};
+
 	vreg_edp_3p3: regulator-edp-3p3 {
 		compatible = "regulator-fixed";
 
@@ -139,6 +217,46 @@
 			linux,cma-default;
 		};
 	};
+
+	usb0-sbu-mux {
+		compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 164 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb0_sbu_default>;
+
+		mode-switch;
+		orientation-switch;
+		svid = /bits/ 16 <0xff01>;
+
+		port {
+			usb0_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_con0_sbu>;
+			};
+		};
+	};
+
+	usb1-sbu-mux {
+		compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 48 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb1_sbu_default>;
+
+		mode-switch;
+		orientation-switch;
+		svid = /bits/ 16 <0xff01>;
+
+		port {
+			usb1_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_con1_sbu>;
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -262,6 +380,24 @@
 	status = "okay";
 };
 
+&mdss0_dp0 {
+	status = "okay";
+};
+
+&mdss0_dp0_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&pmic_glink_con0_ss>;
+};
+
+&mdss0_dp1 {
+	status = "okay";
+};
+
+&mdss0_dp1_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&pmic_glink_con1_ss>;
+};
+
 &mdss0_dp3 {
 	compatible = "qcom,sc8280xp-edp";
 	/delete-property/ #sound-dai-cells;
@@ -480,7 +616,6 @@
 };
 
 &usb_0_dwc3 {
-	/* TODO: Define USB-C connector properly */
 	dr_mode = "host";
 };
 
@@ -499,12 +634,15 @@
 	status = "okay";
 };
 
+&usb_0_role_switch {
+	remote-endpoint = <&pmic_glink_con0_hs>;
+};
+
 &usb_1 {
 	status = "okay";
 };
 
 &usb_1_dwc3 {
-	/* TODO: Define USB-C connector properly */
 	dr_mode = "host";
 };
 
@@ -523,6 +661,10 @@
 	status = "okay";
 };
 
+&usb_1_role_switch {
+	remote-endpoint = <&pmic_glink_con1_hs>;
+};
+
 &xo_board_clk {
 	clock-frequency = <38400000>;
 };
@@ -709,4 +851,54 @@
 			drive-strength = <16>;
 		};
 	};
+
+	usb0_sbu_default: usb0-sbu-state {
+		oe-n-pins {
+			pins = "gpio101";
+			function = "gpio";
+			bias-disable;
+			drive-strengh = <16>;
+			output-high;
+		};
+
+		sel-pins {
+			pins = "gpio164";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+		};
+
+		mode-pins {
+			pins = "gpio167";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+			output-high;
+		};
+	};
+
+	usb1_sbu_default: usb1-sbu-state {
+		oe-n-pins {
+			pins = "gpio48";
+			function = "gpio";
+			bias-disable;
+			drive-strengh = <16>;
+			output-high;
+		};
+
+		sel-pins {
+			pins = "gpio47";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+		};
+
+		mode-pins {
+			pins = "gpio50";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+			output-high;
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index 654b6b310bc9..98e71b933437 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -77,6 +77,84 @@
 		};
 	};
 
+	pmic-glink {
+		compatible = "qcom,sc8280xp-pmic-glink", "qcom,pmic-glink";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_con0_hs: endpoint {
+						remote-endpoint = <&usb_0_role_switch>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_con0_ss: endpoint {
+						remote-endpoint = <&mdss0_dp0_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_con0_sbu: endpoint {
+						remote-endpoint = <&usb0_sbu_mux>;
+					};
+				};
+			};
+		};
+
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_con1_hs: endpoint {
+						remote-endpoint = <&usb_1_role_switch>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_con1_ss: endpoint {
+						remote-endpoint = <&mdss0_dp1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_con1_sbu: endpoint {
+						remote-endpoint = <&usb1_sbu_mux>;
+					};
+				};
+			};
+		};
+	};
+
 	vreg_edp_3p3: regulator-edp-3p3 {
 		compatible = "regulator-fixed";
 
@@ -238,6 +316,46 @@
 			};
 		};
 	};
+
+	usb0-sbu-mux {
+		compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 164 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb0_sbu_default>;
+
+		mode-switch;
+		orientation-switch;
+		svid = /bits/ 16 <0xff01>;
+
+		port {
+			usb0_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_con0_sbu>;
+			};
+		};
+	};
+
+	usb1-sbu-mux {
+		compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 48 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb1_sbu_default>;
+
+		mode-switch;
+		orientation-switch;
+		svid = /bits/ 16 <0xff01>;
+
+		port {
+			usb1_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_con1_sbu>;
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -377,6 +495,24 @@
 	status = "okay";
 };
 
+&mdss0_dp0 {
+	status = "okay";
+};
+
+&mdss0_dp0_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&pmic_glink_con0_ss>;
+};
+
+&mdss0_dp1 {
+	status = "okay";
+};
+
+&mdss0_dp1_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&pmic_glink_con1_ss>;
+};
+
 &mdss0_dp3 {
 	compatible = "qcom,sc8280xp-edp";
 
@@ -871,7 +1007,6 @@
 };
 
 &usb_0_dwc3 {
-	/* TODO: Define USB-C connector properly */
 	dr_mode = "host";
 };
 
@@ -890,12 +1025,15 @@
 	status = "okay";
 };
 
+&usb_0_role_switch {
+	remote-endpoint = <&pmic_glink_con0_hs>;
+};
+
 &usb_1 {
 	status = "okay";
 };
 
 &usb_1_dwc3 {
-	/* TODO: Define USB-C connector properly */
 	dr_mode = "host";
 };
 
@@ -914,6 +1052,10 @@
 	status = "okay";
 };
 
+&usb_1_role_switch {
+	remote-endpoint = <&pmic_glink_con1_hs>;
+};
+
 &vamacro {
 	pinctrl-0 = <&dmic01_default>, <&dmic02_default>;
 	pinctrl-names = "default";
@@ -1147,6 +1289,40 @@
 		};
 	};
 
+	usb0_sbu_default: usb0-sbu-state {
+		oe-n-pins {
+			pins = "gpio101";
+			function = "gpio";
+			bias-disable;
+			drive-strengh = <16>;
+			output-high;
+		};
+
+		sel-pins {
+			pins = "gpio164";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+		};
+	};
+
+	usb1_sbu_default: usb1-sbu-state {
+		oe-n-pins {
+			pins = "gpio48";
+			function = "gpio";
+			bias-disable;
+			drive-strengh = <16>;
+			output-high;
+		};
+
+		sel-pins {
+			pins = "gpio47";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+		};
+	};
+
 	wcd_default: wcd-default-state {
 		reset-pins {
 			pins = "gpio106";
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
index f2c0b71b5d8e..df7d28f7ae60 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
@@ -64,14 +64,14 @@
 
 			pmk8280_pon_pwrkey: pwrkey {
 				compatible = "qcom,pmk8350-pwrkey";
-				interrupts = <0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
+				interrupts-extended = <&spmi_bus 0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
 				linux,code = <KEY_POWER>;
 				status = "disabled";
 			};
 
 			pmk8280_pon_resin: resin {
 				compatible = "qcom,pmk8350-resin";
-				interrupts = <0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
+				interrupts-extended = <&spmi_bus 0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
 				status = "disabled";
 			};
 		};
@@ -79,7 +79,7 @@
 		pmk8280_vadc: adc@3100 {
 			compatible = "qcom,spmi-adc7";
 			reg = <0x3100>;
-			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			interrupts-extended = <&spmi_bus 0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			#io-channel-cells = <1>;
@@ -89,7 +89,7 @@
 		pmk8280_adc_tm: adc-tm@3400 {
 			compatible = "qcom,spmi-adc-tm5-gen2";
 			reg = <0x3400>;
-			interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
+			interrupts-extended = <&spmi_bus 0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			#thermal-sensor-cells = <1>;
@@ -106,7 +106,7 @@
 		pm8280_1_temp_alarm: temp-alarm@a00 {
 			compatible = "qcom,spmi-temp-alarm";
 			reg = <0xa00>;
-			interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			interrupts-extended = <&spmi_bus 0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
 			#thermal-sensor-cells = <0>;
 		};
 
@@ -158,7 +158,7 @@
 		pm8280_2_temp_alarm: temp-alarm@a00 {
 			compatible = "qcom,spmi-temp-alarm";
 			reg = <0xa00>;
-			interrupts = <0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			interrupts-extended = <&spmi_bus 0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
 			#thermal-sensor-cells = <0>;
 		};
 
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index 52172f79f2f2..0d02599d8867 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -3040,6 +3040,11 @@
 				iommus = <&apps_smmu 0x820 0x0>;
 				phys = <&usb_0_hsphy>, <&usb_0_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
+
+				port {
+					usb_0_role_switch: endpoint {
+					};
+				};
 			};
 		};
 
@@ -3095,6 +3100,11 @@
 				iommus = <&apps_smmu 0x860 0x0>;
 				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
+
+				port {
+					usb_1_role_switch: endpoint {
+					};
+				};
 			};
 		};
 
@@ -3155,6 +3165,20 @@
 					#address-cells = <1>;
 					#size-cells = <0>;
 
+					port@0 {
+						reg = <0>;
+						mdss0_intf0_out: endpoint {
+							remote-endpoint = <&mdss0_dp0_in>;
+						};
+					};
+
+					port@4 {
+						reg = <4>;
+						mdss0_intf4_out: endpoint {
+							remote-endpoint = <&mdss0_dp1_in>;
+						};
+					};
+
 					port@5 {
 						reg = <5>;
 						mdss0_intf5_out: endpoint {
@@ -3199,6 +3223,163 @@
 				};
 			};
 
+			mdss0_dp0: displayport-controller@ae90000 {
+				compatible = "qcom,sc8280xp-dp";
+				reg = <0 0xae90000 0 0x200>,
+				      <0 0xae90200 0 0x200>,
+				      <0 0xae90400 0 0x600>,
+				      <0 0xae91000 0 0x400>,
+				      <0 0xae91400 0 0x400>;
+				interrupt-parent = <&mdss0>;
+				interrupts = <12>;
+				clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX0_AUX_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX0_LINK_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+				clock-names = "core_iface", "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel";
+
+				assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
+						  <&dispcc0 DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&usb_0_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+				phys = <&usb_0_qmpphy QMP_USB43DP_DP_PHY>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				operating-points-v2 = <&mdss0_dp0_opp_table>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss0_dp0_in: endpoint {
+							remote-endpoint = <&mdss0_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss0_dp0_out: endpoint {
+						};
+					};
+				};
+
+				mdss0_dp0_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss0_dp1: displayport-controller@ae98000 {
+				compatible = "qcom,sc8280xp-dp";
+				reg = <0 0xae98000 0 0x200>,
+				      <0 0xae98200 0 0x200>,
+				      <0 0xae98400 0 0x600>,
+				      <0 0xae99000 0 0x400>,
+				      <0 0xae99400 0 0x400>;
+				interrupt-parent = <&mdss0>;
+				interrupts = <13>;
+				clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX1_AUX_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX1_LINK_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX1_PIXEL0_CLK>;
+				clock-names = "core_iface", "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface", "stream_pixel";
+
+				assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>,
+						  <&dispcc0 DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				operating-points-v2 = <&mdss0_dp1_opp_table>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss0_dp1_in: endpoint {
+							remote-endpoint = <&mdss0_intf4_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss0_dp1_out: endpoint {
+						};
+					};
+				};
+
+				mdss0_dp1_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
 			mdss0_dp2: displayport-controller@ae9a000 {
 				compatible = "qcom,sc8280xp-dp";
 				reg = <0 0xae9a000 0 0x200>,
@@ -3387,10 +3568,10 @@
 			clocks = <&gcc GCC_DISP_AHB_CLK>,
 				 <&rpmhcc RPMH_CXO_CLK>,
 				 <&sleep_clk>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <0>,
+				 <&usb_0_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 				 <&mdss0_dp2_phy 0>,
 				 <&mdss0_dp2_phy 1>,
 				 <&mdss0_dp3_phy 0>,
diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
index f7602e93121a..7ae6aba5d2ec 100644
--- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
+++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
@@ -110,8 +110,8 @@
 };
 
 &adsp {
-	status = "okay";
 	firmware-name = "qcom/sm7225/fairphone4/adsp.mdt";
+	status = "okay";
 };
 
 &apps_rsc {
@@ -355,13 +355,42 @@
 };
 
 &cdsp {
-	status = "okay";
 	firmware-name = "qcom/sm7225/fairphone4/cdsp.mdt";
+	status = "okay";
 };
 
-&i2c10 {
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
 	status = "okay";
+};
+
+&i2c0 {
 	clock-frequency = <400000>;
+	status = "okay";
+
+	/* ST21NFCD NFC @ 8 */
+	/* VL53L3 ToF @ 29 */
+	/* AW88264A amplifier @ 34 */
+	/* AW88264A amplifier @ 35 */
+};
+
+&i2c8 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	/* HX83112A touchscreen @ 48 */
+};
+
+&i2c10 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	/* PM8008 PMIC @ 8 and 9 */
+	/* PX8618 @ 26 */
+	/* SMB1395 PMIC @ 34 */
 
 	haptics@5a {
 		compatible = "awinic,aw8695";
@@ -396,8 +425,8 @@
 };
 
 &mpss {
-	status = "okay";
 	firmware-name = "qcom/sm7225/fairphone4/modem.mdt";
+	status = "okay";
 };
 
 &pm6150l_flash {
@@ -423,11 +452,11 @@
 };
 
 &pm6150l_wled {
-	status = "okay";
-
 	qcom,switching-freq = <800>;
 	qcom,current-limit-microamp = <20000>;
 	qcom,num-strings = <2>;
+
+	status = "okay";
 };
 
 &pm6350_gpios {
@@ -441,8 +470,8 @@
 };
 
 &pm6350_resin {
-	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
 };
 
 &pm7250b_adc {
@@ -495,6 +524,10 @@
 	};
 };
 
+&qupv3_id_0 {
+	status = "okay";
+};
+
 &qupv3_id_1 {
 	status = "okay";
 };
@@ -535,21 +568,21 @@
 };
 
 &ufs_mem_hc {
-	status = "okay";
-
 	reset-gpios = <&tlmm 156 GPIO_ACTIVE_LOW>;
 
 	vcc-supply = <&vreg_l7e>;
 	vcc-max-microamp = <800000>;
 	vccq2-supply = <&vreg_l12a>;
 	vccq2-max-microamp = <800000>;
-};
 
-&ufs_mem_phy {
 	status = "okay";
+};
 
+&ufs_mem_phy {
 	vdda-phy-supply = <&vreg_l18a>;
 	vdda-pll-supply = <&vreg_l22a>;
+
+	status = "okay";
 };
 
 &usb_1 {
@@ -562,26 +595,26 @@
 };
 
 &usb_1_hsphy {
-	status = "okay";
-
 	vdd-supply = <&vreg_l18a>;
 	vdda-pll-supply = <&vreg_l2a>;
 	vdda-phy-dpdm-supply = <&vreg_l3a>;
-};
 
-&usb_1_qmpphy {
 	status = "okay";
+};
 
+&usb_1_qmpphy {
 	vdda-phy-supply = <&vreg_l22a>;
 	vdda-pll-supply = <&vreg_l16a>;
-};
 
-&wifi {
 	status = "okay";
+};
 
+&wifi {
 	vdd-0.8-cx-mx-supply = <&vreg_l4a>;
 	vdd-1.8-xo-supply = <&vreg_l7a>;
 	vdd-1.3-rfa-supply = <&vreg_l2e>;
 	vdd-3.3-ch0-supply = <&vreg_l10e>;
 	vdd-3.3-ch1-supply = <&vreg_l11e>;
+
+	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
index 54654eb75c28..09baf6959c71 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
@@ -284,6 +284,14 @@
 	status = "okay";
 };
 
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		firmware-name = "qcom/sm8350/a660_zap.mbn";
+	};
+};
+
 &i2c15 {
 	clock-frequency = <400000>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 0a422637b61f..1c97e28da6ad 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -7,6 +7,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,dispcc-sm8350.h>
 #include <dt-bindings/clock/qcom,gcc-sm8350.h>
+#include <dt-bindings/clock/qcom,gpucc-sm8350.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/gpio/gpio.h>
@@ -1421,109 +1422,11 @@
 			};
 		};
 
-		apps_smmu: iommu@15000000 {
-			compatible = "qcom,sm8350-smmu-500", "arm,mmu-500";
-			reg = <0 0x15000000 0 0x100000>;
-			#iommu-cells = <2>;
-			#global-interrupts = <2>;
-			interrupts =    <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>;
+		rng: rng@10d3000 {
+			compatible = "qcom,prng-ee";
+			reg = <0 0x010d3000 0 0x1000>;
+			clocks = <&rpmhcc RPMH_HWKM_CLK>;
+			clock-names = "core";
 		};
 
 		config_noc: interconnect@1500000 {
@@ -1746,18 +1649,76 @@
 			status = "disabled";
 		};
 
-		lpass_ag_noc: interconnect@3c40000 {
-			compatible = "qcom,sm8350-lpass-ag-noc";
-			reg = <0 0x03c40000 0 0xf080>;
-			#interconnect-cells = <2>;
-			qcom,bcm-voters = <&apps_bcm_voter>;
+		ufs_mem_hc: ufshc@1d84000 {
+			compatible = "qcom,sm8350-ufshc", "qcom,ufshc",
+				     "jedec,ufs-2.0";
+			reg = <0 0x01d84000 0 0x3000>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufs_mem_phy_lanes>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <2>;
+			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
+			iommus = <&apps_smmu 0xe0 0x0>;
+
+			clock-names =
+				"core_clk",
+				"bus_aggr_clk",
+				"iface_clk",
+				"core_clk_unipro",
+				"ref_clk",
+				"tx_lane0_sync_clk",
+				"rx_lane0_sync_clk",
+				"rx_lane1_sync_clk";
+			clocks =
+				<&gcc GCC_UFS_PHY_AXI_CLK>,
+				<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				<&gcc GCC_UFS_PHY_AHB_CLK>,
+				<&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				<&rpmhcc RPMH_CXO_CLK>,
+				<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+			freq-table-hz =
+				<75000000 300000000>,
+				<0 0>,
+				<0 0>,
+				<75000000 300000000>,
+				<0 0>,
+				<0 0>,
+				<0 0>,
+				<0 0>;
+			status = "disabled";
 		};
 
-		compute_noc: interconnect@a0c0000 {
-			compatible = "qcom,sm8350-compute-noc";
-			reg = <0 0x0a0c0000 0 0xa180>;
-			#interconnect-cells = <2>;
-			qcom,bcm-voters = <&apps_bcm_voter>;
+		ufs_mem_phy: phy@1d87000 {
+			compatible = "qcom,sm8350-qmp-ufs-phy";
+			reg = <0 0x01d87000 0 0x1c4>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clock-names = "ref",
+				      "ref_aux";
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+			status = "disabled";
+
+			ufs_mem_phy_lanes: phy@1d87400 {
+				reg = <0 0x01d87400 0 0x188>,
+				      <0 0x01d87600 0 0x200>,
+				      <0 0x01d87c00 0 0x200>,
+				      <0 0x01d87800 0 0x188>,
+				      <0 0x01d87a00 0 0x200>;
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+			};
 		};
 
 		ipa: ipa@1e40000 {
@@ -1805,555 +1766,229 @@
 			#hwlock-cells = <1>;
 		};
 
-		mpss: remoteproc@4080000 {
-			compatible = "qcom,sm8350-mpss-pas";
-			reg = <0x0 0x04080000 0x0 0x4040>;
-
-			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
-					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog", "fatal", "ready", "handover",
-					  "stop-ack", "shutdown-ack";
-
-			clocks = <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "xo";
+		gpu: gpu@3d00000 {
+			compatible = "qcom,adreno-660.1", "qcom,adreno";
 
-			power-domains = <&rpmhpd SM8350_CX>,
-					<&rpmhpd SM8350_MSS>;
-			power-domain-names = "cx", "mss";
+			reg = <0 0x03d00000 0 0x40000>,
+			      <0 0x03d9e000 0 0x1000>,
+			      <0 0x03d61000 0 0x800>;
+			reg-names = "kgsl_3d0_reg_memory",
+				    "cx_mem",
+				    "cx_dbgc";
 
-			interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
 
-			memory-region = <&pil_modem_mem>;
+			iommus = <&adreno_smmu 0 0x400>, <&adreno_smmu 1 0x400>;
 
-			qcom,qmp = <&aoss_qmp>;
+			operating-points-v2 = <&gpu_opp_table>;
 
-			qcom,smem-states = <&smp2p_modem_out 0>;
-			qcom,smem-state-names = "stop";
+			qcom,gmu = <&gmu>;
 
 			status = "disabled";
 
-			glink-edge {
-				interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
-							     IPCC_MPROC_SIGNAL_GLINK_QMP
-							     IRQ_TYPE_EDGE_RISING>;
-				mboxes = <&ipcc IPCC_CLIENT_MPSS
-						IPCC_MPROC_SIGNAL_GLINK_QMP>;
-				label = "modem";
-				qcom,remote-pid = <1>;
+			zap-shader {
+				memory-region = <&pil_gpu_mem>;
 			};
-		};
-
-		pdc: interrupt-controller@b220000 {
-			compatible = "qcom,sm8350-pdc", "qcom,pdc";
-			reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>;
-			qcom,pdc-ranges = <0 480 40>, <40 140 14>, <54 263 1>,   <55 306 4>,
-					  <59 312 3>, <62 374 2>,  <64 434 2>,   <66 438 3>,
-					  <69 86 1>,  <70 520 54>, <124 609 31>, <155 63 1>,
-					  <156 716 12>;
-			#interrupt-cells = <2>;
-			interrupt-parent = <&intc>;
-			interrupt-controller;
-		};
-
-		tsens0: thermal-sensor@c263000 {
-			compatible = "qcom,sm8350-tsens", "qcom,tsens-v2";
-			reg = <0 0x0c263000 0 0x1ff>, /* TM */
-			      <0 0x0c222000 0 0x8>; /* SROT */
-			#qcom,sensors = <15>;
-			interrupts-extended = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>,
-				     <&pdc 28 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "uplow", "critical";
-			#thermal-sensor-cells = <1>;
-		};
-
-		tsens1: thermal-sensor@c265000 {
-			compatible = "qcom,sm8350-tsens", "qcom,tsens-v2";
-			reg = <0 0x0c265000 0 0x1ff>, /* TM */
-			      <0 0x0c223000 0 0x8>; /* SROT */
-			#qcom,sensors = <14>;
-			interrupts-extended = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>,
-				     <&pdc 29 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "uplow", "critical";
-			#thermal-sensor-cells = <1>;
-		};
-
-		aoss_qmp: power-management@c300000 {
-			compatible = "qcom,sm8350-aoss-qmp", "qcom,aoss-qmp";
-			reg = <0 0x0c300000 0 0x400>;
-			interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
-						     IRQ_TYPE_EDGE_RISING>;
-			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
-
-			#clock-cells = <0>;
-		};
-
-		sram@c3f0000 {
-			compatible = "qcom,rpmh-stats";
-			reg = <0 0x0c3f0000 0 0x400>;
-		};
-
-		spmi_bus: spmi@c440000 {
-			compatible = "qcom,spmi-pmic-arb";
-			reg = <0x0 0x0c440000 0x0 0x1100>,
-			      <0x0 0x0c600000 0x0 0x2000000>,
-			      <0x0 0x0e600000 0x0 0x100000>,
-			      <0x0 0x0e700000 0x0 0xa0000>,
-			      <0x0 0x0c40a000 0x0 0x26000>;
-			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
-			interrupt-names = "periph_irq";
-			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,ee = <0>;
-			qcom,channel = <0>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-			interrupt-controller;
-			#interrupt-cells = <4>;
-		};
 
-		tlmm: pinctrl@f100000 {
-			compatible = "qcom,sm8350-tlmm";
-			reg = <0 0x0f100000 0 0x300000>;
-			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			gpio-ranges = <&tlmm 0 0 204>;
-			wakeup-parent = <&pdc>;
+			/* note: downstream checks gpu binning for 670 Mhz */
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
 
-			sdc2_default_state: sdc2-default-state {
-				clk-pins {
-					pins = "sdc2_clk";
-					drive-strength = <16>;
-					bias-disable;
+				opp-840000000 {
+					opp-hz = /bits/ 64 <840000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
 				};
 
-				cmd-pins {
-					pins = "sdc2_cmd";
-					drive-strength = <16>;
-					bias-pull-up;
+				opp-778000000 {
+					opp-hz = /bits/ 64 <778000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
 				};
 
-				data-pins {
-					pins = "sdc2_data";
-					drive-strength = <16>;
-					bias-pull-up;
+				opp-738000000 {
+					opp-hz = /bits/ 64 <738000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
 				};
-			};
 
-			sdc2_sleep_state: sdc2-sleep-state {
-				clk-pins {
-					pins = "sdc2_clk";
-					drive-strength = <2>;
-					bias-disable;
+				opp-676000000 {
+					opp-hz = /bits/ 64 <676000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
 				};
 
-				cmd-pins {
-					pins = "sdc2_cmd";
-					drive-strength = <2>;
-					bias-pull-up;
+				opp-608000000 {
+					opp-hz = /bits/ 64 <608000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
 				};
 
-				data-pins {
-					pins = "sdc2_data";
-					drive-strength = <2>;
-					bias-pull-up;
+				opp-540000000 {
+					opp-hz = /bits/ 64 <540000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
 				};
-			};
 
-			qup_uart3_default_state: qup-uart3-default-state {
-				rx-pins {
-					pins = "gpio18";
-					function = "qup3";
-				};
-				tx-pins {
-					pins = "gpio19";
-					function = "qup3";
+				opp-491000000 {
+					opp-hz = /bits/ 64 <491000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
 				};
-			};
-
-			qup_uart6_default: qup-uart6-default-state {
-				pins = "gpio30", "gpio31";
-				function = "qup6";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			qup_uart18_default: qup-uart18-default-state {
-				pins = "gpio58", "gpio59";
-				function = "qup18";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			qup_i2c0_default: qup-i2c0-default-state {
-				pins = "gpio4", "gpio5";
-				function = "qup0";
-				drive-strength = <2>;
-				bias-pull-up;
-			};
-
-			qup_i2c1_default: qup-i2c1-default-state {
-				pins = "gpio8", "gpio9";
-				function = "qup1";
-				drive-strength = <2>;
-				bias-pull-up;
-			};
-
-			qup_i2c2_default: qup-i2c2-default-state {
-				pins = "gpio12", "gpio13";
-				function = "qup2";
-				drive-strength = <2>;
-				bias-pull-up;
-			};
-
-			qup_i2c4_default: qup-i2c4-default-state {
-				pins = "gpio20", "gpio21";
-				function = "qup4";
-				drive-strength = <2>;
-				bias-pull-up;
-			};
-
-			qup_i2c5_default: qup-i2c5-default-state {
-				pins = "gpio24", "gpio25";
-				function = "qup5";
-				drive-strength = <2>;
-				bias-pull-up;
-			};
-
-			qup_i2c6_default: qup-i2c6-default-state {
-				pins = "gpio28", "gpio29";
-				function = "qup6";
-				drive-strength = <2>;
-				bias-pull-up;
-			};
 
-			qup_i2c7_default: qup-i2c7-default-state {
-				pins = "gpio32", "gpio33";
-				function = "qup7";
-				drive-strength = <2>;
-				bias-disable;
-			};
+				opp-443000000 {
+					opp-hz = /bits/ 64 <443000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
 
-			qup_i2c8_default: qup-i2c8-default-state {
-				pins = "gpio36", "gpio37";
-				function = "qup8";
-				drive-strength = <2>;
-				bias-pull-up;
-			};
+				opp-379000000 {
+					opp-hz = /bits/ 64 <379000000>;
+					opp-level = <80 /* RPMH_REGULATOR_LEVEL_LOW_SVS_L1 */>;
+				};
 
-			qup_i2c9_default: qup-i2c9-default-state {
-				pins = "gpio40", "gpio41";
-				function = "qup9";
-				drive-strength = <2>;
-				bias-pull-up;
+				opp-315000000 {
+					opp-hz = /bits/ 64 <315000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				};
 			};
+		};
 
-			qup_i2c10_default: qup-i2c10-default-state {
-				pins = "gpio44", "gpio45";
-				function = "qup10";
-				drive-strength = <2>;
-				bias-pull-up;
-			};
+		gmu: gmu@3d6a000 {
+			compatible = "qcom,adreno-gmu-660.1", "qcom,adreno-gmu";
 
-			qup_i2c11_default: qup-i2c11-default-state {
-				pins = "gpio48", "gpio49";
-				function = "qup11";
-				drive-strength = <2>;
-				bias-pull-up;
-			};
+			reg = <0 0x03d6a000 0 0x34000>,
+			      <0 0x03de0000 0 0x10000>,
+			      <0 0x0b290000 0 0x10000>;
+			reg-names = "gmu", "rscc", "gmu_pdc";
 
-			qup_i2c12_default: qup-i2c12-default-state {
-				pins = "gpio52", "gpio53";
-				function = "qup12";
-				drive-strength = <2>;
-				bias-pull-up;
-			};
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
 
-			qup_i2c13_default: qup-i2c13-default-state {
-				pins = "gpio0", "gpio1";
-				function = "qup13";
-				drive-strength = <2>;
-				bias-pull-up;
-			};
+			clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_CXO_CLK>,
+				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>;
+			clock-names = "gmu",
+				      "cxo",
+				      "axi",
+				      "memnoc",
+				      "ahb",
+				      "hub",
+				      "smmu_vote";
 
-			qup_i2c14_default: qup-i2c14-default-state {
-				pins = "gpio56", "gpio57";
-				function = "qup14";
-				drive-strength = <2>;
-				bias-disable;
-			};
+			power-domains = <&gpucc GPU_CX_GDSC>,
+					<&gpucc GPU_GX_GDSC>;
+			power-domain-names = "cx",
+					     "gx";
 
-			qup_i2c15_default: qup-i2c15-default-state {
-				pins = "gpio60", "gpio61";
-				function = "qup15";
-				drive-strength = <2>;
-				bias-disable;
-			};
+			iommus = <&adreno_smmu 5 0x400>;
 
-			qup_i2c16_default: qup-i2c16-default-state {
-				pins = "gpio64", "gpio65";
-				function = "qup16";
-				drive-strength = <2>;
-				bias-disable;
-			};
+			operating-points-v2 = <&gmu_opp_table>;
 
-			qup_i2c17_default: qup-i2c17-default-state {
-				pins = "gpio72", "gpio73";
-				function = "qup17";
-				drive-strength = <2>;
-				bias-disable;
-			};
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
 
-			qup_i2c19_default: qup-i2c19-default-state {
-				pins = "gpio76", "gpio77";
-				function = "qup19";
-				drive-strength = <2>;
-				bias-disable;
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+				};
 			};
 		};
 
-		rng: rng@10d3000 {
-			compatible = "qcom,prng-ee";
-			reg = <0 0x010d3000 0 0x1000>;
-			clocks = <&rpmhcc RPMH_HWKM_CLK>;
-			clock-names = "core";
-		};
-
-		intc: interrupt-controller@17a00000 {
-			compatible = "arm,gic-v3";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			#redistributor-regions = <1>;
-			redistributor-stride = <0 0x20000>;
-			reg = <0x0 0x17a00000 0x0 0x10000>,     /* GICD */
-			      <0x0 0x17a60000 0x0 0x100000>;    /* GICR * 8 */
-			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		gpucc: clock-controller@3d90000 {
+			compatible = "qcom,sm8350-gpucc";
+			reg = <0 0x03d90000 0 0x9000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			clock-names = "bi_tcxo",
+				      "gcc_gpu_gpll0_clk_src",
+				      "gcc_gpu_gpll0_div_clk_src";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
 		};
 
-		timer@17c20000 {
-			compatible = "arm,armv7-timer-mem";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0 0 0x20000000>;
-			reg = <0x0 0x17c20000 0x0 0x1000>;
-			clock-frequency = <19200000>;
-
-			frame@17c21000 {
-				frame-number = <0>;
-				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x17c21000 0x1000>,
-				      <0x17c22000 0x1000>;
-			};
-
-			frame@17c23000 {
-				frame-number = <1>;
-				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x17c23000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@17c25000 {
-				frame-number = <2>;
-				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x17c25000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@17c27000 {
-				frame-number = <3>;
-				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x17c27000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@17c29000 {
-				frame-number = <4>;
-				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x17c29000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@17c2b000 {
-				frame-number = <5>;
-				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x17c2b000 0x1000>;
-				status = "disabled";
-			};
+		adreno_smmu: iommu@3da0000 {
+			compatible = "qcom,sm8350-smmu-500", "qcom,adreno-smmu", "arm,mmu-500";
+			reg = <0 0x03da0000 0 0x20000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+			interrupts = <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
+				 <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_HUB_AON_CLK>;
+			clock-names = "bus",
+				      "iface",
+				      "ahb",
+				      "hlos1_vote_gpu_smmu",
+				      "cx_gmu",
+				      "hub_cx_int",
+				      "hub_aon";
 
-			frame@17c2d000 {
-				frame-number = <6>;
-				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x17c2d000 0x1000>;
-				status = "disabled";
-			};
+			power-domains = <&gpucc GPU_CX_GDSC>;
+			dma-coherent;
 		};
 
-		apps_rsc: rsc@18200000 {
-			label = "apps_rsc";
-			compatible = "qcom,rpmh-rsc";
-			reg = <0x0 0x18200000 0x0 0x10000>,
-				<0x0 0x18210000 0x0 0x10000>,
-				<0x0 0x18220000 0x0 0x10000>;
-			reg-names = "drv-0", "drv-1", "drv-2";
-			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,tcs-offset = <0xd00>;
-			qcom,drv-id = <2>;
-			qcom,tcs-config = <ACTIVE_TCS  2>, <SLEEP_TCS   3>,
-					  <WAKE_TCS    3>, <CONTROL_TCS 0>;
-			power-domains = <&CLUSTER_PD>;
-
-			rpmhcc: clock-controller {
-				compatible = "qcom,sm8350-rpmh-clk";
-				#clock-cells = <1>;
-				clock-names = "xo";
-				clocks = <&xo_board>;
-			};
-
-			rpmhpd: power-controller {
-				compatible = "qcom,sm8350-rpmhpd";
-				#power-domain-cells = <1>;
-				operating-points-v2 = <&rpmhpd_opp_table>;
-
-				rpmhpd_opp_table: opp-table {
-					compatible = "operating-points-v2";
-
-					rpmhpd_opp_ret: opp1 {
-						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
-					};
-
-					rpmhpd_opp_min_svs: opp2 {
-						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
-					};
-
-					rpmhpd_opp_low_svs: opp3 {
-						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
-					};
-
-					rpmhpd_opp_svs: opp4 {
-						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
-					};
-
-					rpmhpd_opp_svs_l1: opp5 {
-						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
-					};
-
-					rpmhpd_opp_nom: opp6 {
-						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
-					};
-
-					rpmhpd_opp_nom_l1: opp7 {
-						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
-					};
-
-					rpmhpd_opp_nom_l2: opp8 {
-						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
-					};
-
-					rpmhpd_opp_turbo: opp9 {
-						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
-					};
-
-					rpmhpd_opp_turbo_l1: opp10 {
-						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
-					};
-				};
-			};
-
-			apps_bcm_voter: bcm-voter {
-				compatible = "qcom,bcm-voter";
-			};
+		lpass_ag_noc: interconnect@3c40000 {
+			compatible = "qcom,sm8350-lpass-ag-noc";
+			reg = <0 0x03c40000 0 0xf080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
-		cpufreq_hw: cpufreq@18591000 {
-			compatible = "qcom,sm8350-cpufreq-epss", "qcom,cpufreq-epss";
-			reg = <0 0x18591000 0 0x1000>,
-			      <0 0x18592000 0 0x1000>,
-			      <0 0x18593000 0 0x1000>;
-			reg-names = "freq-domain0", "freq-domain1", "freq-domain2";
+		mpss: remoteproc@4080000 {
+			compatible = "qcom,sm8350-mpss-pas";
+			reg = <0x0 0x04080000 0x0 0x4040>;
 
-			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
-			clock-names = "xo", "alternate";
+			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
 
-			#freq-domain-cells = <1>;
-		};
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
 
-		ufs_mem_hc: ufshc@1d84000 {
-			compatible = "qcom,sm8350-ufshc", "qcom,ufshc",
-				     "jedec,ufs-2.0";
-			reg = <0 0x01d84000 0 0x3000>;
-			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
-			phy-names = "ufsphy";
-			lanes-per-direction = <2>;
-			#reset-cells = <1>;
-			resets = <&gcc GCC_UFS_PHY_BCR>;
-			reset-names = "rst";
+			power-domains = <&rpmhpd SM8350_CX>,
+					<&rpmhpd SM8350_MSS>;
+			power-domain-names = "cx", "mss";
 
-			power-domains = <&gcc UFS_PHY_GDSC>;
+			interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
 
-			iommus = <&apps_smmu 0xe0 0x0>;
+			memory-region = <&pil_modem_mem>;
 
-			clock-names =
-				"core_clk",
-				"bus_aggr_clk",
-				"iface_clk",
-				"core_clk_unipro",
-				"ref_clk",
-				"tx_lane0_sync_clk",
-				"rx_lane0_sync_clk",
-				"rx_lane1_sync_clk";
-			clocks =
-				<&gcc GCC_UFS_PHY_AXI_CLK>,
-				<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
-				<&gcc GCC_UFS_PHY_AHB_CLK>,
-				<&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
-				<&rpmhcc RPMH_CXO_CLK>,
-				<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
-				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
-				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
-			freq-table-hz =
-				<75000000 300000000>,
-				<0 0>,
-				<0 0>,
-				<75000000 300000000>,
-				<0 0>,
-				<0 0>,
-				<0 0>,
-				<0 0>;
-			status = "disabled";
-		};
+			qcom,qmp = <&aoss_qmp>;
 
-		ufs_mem_phy: phy@1d87000 {
-			compatible = "qcom,sm8350-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0x1c4>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
-			clock-names = "ref",
-				      "ref_aux";
-			clocks = <&rpmhcc RPMH_CXO_CLK>,
-				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+			qcom,smem-states = <&smp2p_modem_out 0>;
+			qcom,smem-state-names = "stop";
 
-			resets = <&ufs_mem_hc 0>;
-			reset-names = "ufsphy";
 			status = "disabled";
 
-			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x188>,
-				      <0 0x01d87600 0 0x200>,
-				      <0 0x01d87c00 0 0x200>,
-				      <0 0x01d87800 0 0x188>,
-				      <0 0x01d87a00 0 0x200>;
-				#clock-cells = <1>;
-				#phy-cells = <0>;
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_MPSS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+				label = "modem";
+				qcom,remote-pid = <1>;
 			};
 		};
 
@@ -2425,115 +2060,6 @@
 			};
 		};
 
-		cdsp: remoteproc@98900000 {
-			compatible = "qcom,sm8350-cdsp-pas";
-			reg = <0 0x98900000 0 0x1400000>;
-
-			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
-					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog", "fatal", "ready",
-					  "handover", "stop-ack";
-
-			clocks = <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "xo";
-
-			power-domains = <&rpmhpd SM8350_CX>,
-					<&rpmhpd SM8350_MXC>;
-			power-domain-names = "cx", "mxc";
-
-			interconnects = <&compute_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
-
-			memory-region = <&pil_cdsp_mem>;
-
-			qcom,qmp = <&aoss_qmp>;
-
-			qcom,smem-states = <&smp2p_cdsp_out 0>;
-			qcom,smem-state-names = "stop";
-
-			status = "disabled";
-
-			glink-edge {
-				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
-							     IPCC_MPROC_SIGNAL_GLINK_QMP
-							     IRQ_TYPE_EDGE_RISING>;
-				mboxes = <&ipcc IPCC_CLIENT_CDSP
-						IPCC_MPROC_SIGNAL_GLINK_QMP>;
-
-				label = "cdsp";
-				qcom,remote-pid = <5>;
-
-				fastrpc {
-					compatible = "qcom,fastrpc";
-					qcom,glink-channels = "fastrpcglink-apps-dsp";
-					label = "cdsp";
-					qcom,non-secure-domain;
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					compute-cb@1 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <1>;
-						iommus = <&apps_smmu 0x2161 0x0400>,
-							 <&apps_smmu 0x1181 0x0420>;
-					};
-
-					compute-cb@2 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <2>;
-						iommus = <&apps_smmu 0x2162 0x0400>,
-							 <&apps_smmu 0x1182 0x0420>;
-					};
-
-					compute-cb@3 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <3>;
-						iommus = <&apps_smmu 0x2163 0x0400>,
-							 <&apps_smmu 0x1183 0x0420>;
-					};
-
-					compute-cb@4 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <4>;
-						iommus = <&apps_smmu 0x2164 0x0400>,
-							 <&apps_smmu 0x1184 0x0420>;
-					};
-
-					compute-cb@5 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <5>;
-						iommus = <&apps_smmu 0x2165 0x0400>,
-							 <&apps_smmu 0x1185 0x0420>;
-					};
-
-					compute-cb@6 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <6>;
-						iommus = <&apps_smmu 0x2166 0x0400>,
-							 <&apps_smmu 0x1186 0x0420>;
-					};
-
-					compute-cb@7 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <7>;
-						iommus = <&apps_smmu 0x2167 0x0400>,
-							 <&apps_smmu 0x1187 0x0420>;
-					};
-
-					compute-cb@8 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <8>;
-						iommus = <&apps_smmu 0x2168 0x0400>,
-							 <&apps_smmu 0x1188 0x0420>;
-					};
-
-					/* note: secure cb9 in downstream */
-				};
-			};
-		};
-
 		sdhc_2: mmc@8804000 {
 			compatible = "qcom,sm8350-sdhci", "qcom,sdhci-msm-v5";
 			reg = <0 0x08804000 0 0x1000>;
@@ -2682,6 +2208,13 @@
 			reg-names = "llcc_base", "llcc_broadcast_base";
 		};
 
+		compute_noc: interconnect@a0c0000 {
+			compatible = "qcom,sm8350-compute-noc";
+			reg = <0 0x0a0c0000 0 0xa180>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
 		usb_1: usb@a6f8800 {
 			compatible = "qcom,sm8350-dwc3", "qcom,dwc3";
 			reg = <0 0x0a6f8800 0 0x400>;
@@ -3106,6 +2639,381 @@
 			power-domains = <&rpmhpd SM8350_MMCX>;
 		};
 
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,sm8350-pdc", "qcom,pdc";
+			reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>;
+			qcom,pdc-ranges = <0 480 40>, <40 140 14>, <54 263 1>,   <55 306 4>,
+					  <59 312 3>, <62 374 2>,  <64 434 2>,   <66 438 3>,
+					  <69 86 1>,  <70 520 54>, <124 609 31>, <155 63 1>,
+					  <156 716 12>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		tsens0: thermal-sensor@c263000 {
+			compatible = "qcom,sm8350-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c263000 0 0x1ff>, /* TM */
+			      <0 0x0c222000 0 0x8>; /* SROT */
+			#qcom,sensors = <15>;
+			interrupts-extended = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>,
+				     <&pdc 28 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@c265000 {
+			compatible = "qcom,sm8350-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c265000 0 0x1ff>, /* TM */
+			      <0 0x0c223000 0 0x8>; /* SROT */
+			#qcom,sensors = <14>;
+			interrupts-extended = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>,
+				     <&pdc 29 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		aoss_qmp: power-management@c300000 {
+			compatible = "qcom,sm8350-aoss-qmp", "qcom,aoss-qmp";
+			reg = <0 0x0c300000 0 0x400>;
+			interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
+						     IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+			#clock-cells = <0>;
+		};
+
+		sram@c3f0000 {
+			compatible = "qcom,rpmh-stats";
+			reg = <0 0x0c3f0000 0 0x400>;
+		};
+
+		spmi_bus: spmi@c440000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0 0x0c440000 0x0 0x1100>,
+			      <0x0 0x0c600000 0x0 0x2000000>,
+			      <0x0 0x0e600000 0x0 0x100000>,
+			      <0x0 0x0e700000 0x0 0xa0000>,
+			      <0x0 0x0c40a000 0x0 0x26000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,sm8350-tlmm";
+			reg = <0 0x0f100000 0 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 204>;
+			wakeup-parent = <&pdc>;
+
+			sdc2_default_state: sdc2-default-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <16>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <16>;
+					bias-pull-up;
+				};
+			};
+
+			sdc2_sleep_state: sdc2-sleep-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			qup_uart3_default_state: qup-uart3-default-state {
+				rx-pins {
+					pins = "gpio18";
+					function = "qup3";
+				};
+				tx-pins {
+					pins = "gpio19";
+					function = "qup3";
+				};
+			};
+
+			qup_uart6_default: qup-uart6-default-state {
+				pins = "gpio30", "gpio31";
+				function = "qup6";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_uart18_default: qup-uart18-default-state {
+				pins = "gpio58", "gpio59";
+				function = "qup18";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c0_default: qup-i2c0-default-state {
+				pins = "gpio4", "gpio5";
+				function = "qup0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c1_default: qup-i2c1-default-state {
+				pins = "gpio8", "gpio9";
+				function = "qup1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c2_default: qup-i2c2-default-state {
+				pins = "gpio12", "gpio13";
+				function = "qup2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c4_default: qup-i2c4-default-state {
+				pins = "gpio20", "gpio21";
+				function = "qup4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c5_default: qup-i2c5-default-state {
+				pins = "gpio24", "gpio25";
+				function = "qup5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c6_default: qup-i2c6-default-state {
+				pins = "gpio28", "gpio29";
+				function = "qup6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c7_default: qup-i2c7-default-state {
+				pins = "gpio32", "gpio33";
+				function = "qup7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c8_default: qup-i2c8-default-state {
+				pins = "gpio36", "gpio37";
+				function = "qup8";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c9_default: qup-i2c9-default-state {
+				pins = "gpio40", "gpio41";
+				function = "qup9";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c10_default: qup-i2c10-default-state {
+				pins = "gpio44", "gpio45";
+				function = "qup10";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c11_default: qup-i2c11-default-state {
+				pins = "gpio48", "gpio49";
+				function = "qup11";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c12_default: qup-i2c12-default-state {
+				pins = "gpio52", "gpio53";
+				function = "qup12";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c13_default: qup-i2c13-default-state {
+				pins = "gpio0", "gpio1";
+				function = "qup13";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c14_default: qup-i2c14-default-state {
+				pins = "gpio56", "gpio57";
+				function = "qup14";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c15_default: qup-i2c15-default-state {
+				pins = "gpio60", "gpio61";
+				function = "qup15";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c16_default: qup-i2c16-default-state {
+				pins = "gpio64", "gpio65";
+				function = "qup16";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c17_default: qup-i2c17-default-state {
+				pins = "gpio72", "gpio73";
+				function = "qup17";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c19_default: qup-i2c19-default-state {
+				pins = "gpio76", "gpio77";
+				function = "qup19";
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sm8350-smmu-500", "arm,mmu-500";
+			reg = <0 0x15000000 0 0x100000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+			interrupts =    <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		adsp: remoteproc@17300000 {
 			compatible = "qcom,sm8350-adsp-pas";
 			reg = <0 0x17300000 0 0x100>;
@@ -3172,6 +3080,276 @@
 				};
 			};
 		};
+
+		intc: interrupt-controller@17a00000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0 0x20000>;
+			reg = <0x0 0x17a00000 0x0 0x10000>,     /* GICD */
+			      <0x0 0x17a60000 0x0 0x100000>;    /* GICR * 8 */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		timer@17c20000 {
+			compatible = "arm,armv7-timer-mem";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0 0x20000000>;
+			reg = <0x0 0x17c20000 0x0 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@17c21000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c21000 0x1000>,
+				      <0x17c22000 0x1000>;
+			};
+
+			frame@17c23000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c23000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c25000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c25000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c27000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c27000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c29000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c29000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c2b000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c2b000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c2d000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c2d000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@18200000 {
+			label = "apps_rsc";
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x0 0x18200000 0x0 0x10000>,
+				<0x0 0x18210000 0x0 0x10000>,
+				<0x0 0x18220000 0x0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS  2>, <SLEEP_TCS   3>,
+					  <WAKE_TCS    3>, <CONTROL_TCS 0>;
+			power-domains = <&CLUSTER_PD>;
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sm8350-rpmh-clk";
+				#clock-cells = <1>;
+				clock-names = "xo";
+				clocks = <&xo_board>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sm8350-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp6 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp10 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+		};
+
+		cpufreq_hw: cpufreq@18591000 {
+			compatible = "qcom,sm8350-cpufreq-epss", "qcom,cpufreq-epss";
+			reg = <0 0x18591000 0 0x1000>,
+			      <0 0x18592000 0 0x1000>,
+			      <0 0x18593000 0 0x1000>;
+			reg-names = "freq-domain0", "freq-domain1", "freq-domain2";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#freq-domain-cells = <1>;
+		};
+
+		cdsp: remoteproc@98900000 {
+			compatible = "qcom,sm8350-cdsp-pas";
+			reg = <0 0x98900000 0 0x1400000>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SM8350_CX>,
+					<&rpmhpd SM8350_MXC>;
+			power-domain-names = "cx", "mxc";
+
+			interconnects = <&compute_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
+
+			memory-region = <&pil_cdsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_cdsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_CDSP
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "cdsp";
+				qcom,remote-pid = <5>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "cdsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x2161 0x0400>,
+							 <&apps_smmu 0x1181 0x0420>;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x2162 0x0400>,
+							 <&apps_smmu 0x1182 0x0420>;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x2163 0x0400>,
+							 <&apps_smmu 0x1183 0x0420>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x2164 0x0400>,
+							 <&apps_smmu 0x1184 0x0420>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x2165 0x0400>,
+							 <&apps_smmu 0x1185 0x0420>;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x2166 0x0400>,
+							 <&apps_smmu 0x1186 0x0420>;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+						iommus = <&apps_smmu 0x2167 0x0400>,
+							 <&apps_smmu 0x1187 0x0420>;
+					};
+
+					compute-cb@8 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <8>;
+						iommus = <&apps_smmu 0x2168 0x0400>,
+							 <&apps_smmu 0x1188 0x0420>;
+					};
+
+					/* note: secure cb9 in downstream */
+				};
+			};
+		};
 	};
 
 	thermal_zones: thermal-zones {
diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index 9910006c32aa..ff4d342c0725 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -1858,8 +1858,6 @@
 			qcom,controlled-remotely;
 			iommus = <&apps_smmu 0x480 0x0>,
 				 <&apps_smmu 0x481 0x0>;
-			interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
-			interconnect-names = "memory";
 		};
 
 		crypto: crypto@1de0000 {