diff options
| author | Arnd Bergmann <arnd@arndb.de> | 2023-08-14 23:08:54 +0200 |
|---|---|---|
| committer | Arnd Bergmann <arnd@arndb.de> | 2023-08-14 23:09:10 +0200 |
| commit | ba817911855ce2ac3fd2a618aced1ce937353abe (patch) | |
| tree | 38240dc8f2ada004cb9f869bc2a9f38743c0109c | |
| parent | eeb751c41060182f42149ebbd2e73efc12dd1f33 (diff) | |
| parent | f331eb1f5454123f3cec51c18a3d86c2a53bddb9 (diff) | |
Merge tag 'riscv-dt-for-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt
RISC-V Devicetrees for v6.6
StarFive:
There's only StarFive stuff this time around, starting with some
bindings to get clock ID defines out of the binding headers. Getting
these (and the syscon bindings) in unblocked a swathe of stuff sitting
on the list. Added are: new clock controllers and sycons, ethernet
support, thermal sensors, USB and PCIe PHYs, hwrng, mmc and a few more
besides for the VisionFive v2. The original VisionFive and BeagleV
Starlight got some the thermal sensor support too, as that is supported
by the same driver. These changes make the board actually usable with
something other than an initramfs.
Overlay support by way of the -@ flag set during dtb building, is added
also.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-for-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: (26 commits)
riscv: dts: starfive: jh7110: Fix GMAC configuration
riscv: dts: starfive - Add hwrng node for JH7110 SoC
riscv: dts: starfive - Add crypto and DMA node for JH7110
riscv: dts: starfive: Add mmc nodes on VisionFive 2 board
riscv: dts: starfive: enable DCDC1&ALDO4 node in axp15060
riscv: dts: starfive: Add QSPI controller node for StarFive JH7110 SoC
riscv: dts: starfive: jh7110: add the node and pins configuration for tdm
riscv: dts: starfive: jh7110: add dma controller node
riscv: dts: starfive: Add spi node and pins configuration
riscv: dts: starfive: Add USB dts node for JH7110
riscv: dts: starfive: Add USB and PCIe PHY nodes for JH7110
riscv: dts: starfive: jh7110: Add temperature sensor node and thermal-zones
riscv: dts: starfive: jh7100: Add temperature sensor node and thermal-zones
riscv: dts: starfive: visionfive 2: Add configuration of gmac and phy
riscv: dts: starfive: jh7110: Add ethernet device nodes
riscv: dts: starfive: jh7110: Add PLL clocks source in SYSCRG node
riscv: dts: starfive: jh7110: Add syscon nodes
riscv: dts: starfive: jh7110: Add STGCRG/ISPCRG/VOUTCRG nodes
riscv: dts: starfive: jh7110: Add DVP and HDMI TX pixel external clocks
dt-bindings: clock: Add StarFive JH7110 Video-Output clock and reset generator
...
Link: https://lore.kernel.org/r/20230813-naturist-fragment-ac7d10c453ba@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
15 files changed, 1433 insertions, 4 deletions
diff --git a/Documentation/devicetree/bindings/clock/starfive,jh7110-ispcrg.yaml b/Documentation/devicetree/bindings/clock/starfive,jh7110-ispcrg.yaml new file mode 100644 index 000000000000..3b8b85be5cd0 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/starfive,jh7110-ispcrg.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/starfive,jh7110-ispcrg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive JH7110 Image-Signal-Process Clock and Reset Generator + +maintainers: + - Xingyu Wu <xingyu.wu@starfivetech.com> + +properties: + compatible: + const: starfive,jh7110-ispcrg + + reg: + maxItems: 1 + + clocks: + items: + - description: ISP Top core + - description: ISP Top Axi + - description: NOC ISP Bus + - description: external DVP + + clock-names: + items: + - const: isp_top_core + - const: isp_top_axi + - const: noc_bus_isp_axi + - const: dvp_clk + + resets: + items: + - description: ISP Top core + - description: ISP Top Axi + - description: NOC ISP Bus + + '#clock-cells': + const: 1 + description: + See <dt-bindings/clock/starfive,jh7110-crg.h> for valid indices. + + '#reset-cells': + const: 1 + description: + See <dt-bindings/reset/starfive,jh7110-crg.h> for valid indices. + + power-domains: + maxItems: 1 + description: + ISP domain power + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - '#clock-cells' + - '#reset-cells' + - power-domains + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/starfive,jh7110-crg.h> + #include <dt-bindings/power/starfive,jh7110-pmu.h> + #include <dt-bindings/reset/starfive,jh7110-crg.h> + + ispcrg: clock-controller@19810000 { + compatible = "starfive,jh7110-ispcrg"; + reg = <0x19810000 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_ISP_TOP_CORE>, + <&syscrg JH7110_SYSCLK_ISP_TOP_AXI>, + <&syscrg JH7110_SYSCLK_NOC_BUS_ISP_AXI>, + <&dvp_clk>; + clock-names = "isp_top_core", "isp_top_axi", + "noc_bus_isp_axi", "dvp_clk"; + resets = <&syscrg JH7110_SYSRST_ISP_TOP>, + <&syscrg JH7110_SYSRST_ISP_TOP_AXI>, + <&syscrg JH7110_SYSRST_NOC_BUS_ISP_AXI>; + #clock-cells = <1>; + #reset-cells = <1>; + power-domains = <&pwrc JH7110_PD_ISP>; + }; diff --git a/Documentation/devicetree/bindings/clock/starfive,jh7110-pll.yaml b/Documentation/devicetree/bindings/clock/starfive,jh7110-pll.yaml new file mode 100644 index 000000000000..be8300ce86d0 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/starfive,jh7110-pll.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/starfive,jh7110-pll.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive JH7110 PLL Clock Generator + +description: + These PLLs are high speed, low jitter frequency synthesizers in the JH7110. + Each PLL works in integer mode or fraction mode, with configuration + registers in the sys syscon. So the PLLs node should be a child of + SYS-SYSCON node. + The formula for calculating frequency is + Fvco = Fref * (NI + NF) / M / Q1 + +maintainers: + - Xingyu Wu <xingyu.wu@starfivetech.com> + +properties: + compatible: + const: starfive,jh7110-pll + + clocks: + maxItems: 1 + description: Main Oscillator (24 MHz) + + '#clock-cells': + const: 1 + description: + See <dt-bindings/clock/starfive,jh7110-crg.h> for valid indices. + +required: + - compatible + - clocks + - '#clock-cells' + +additionalProperties: false + +examples: + - | + clock-controller { + compatible = "starfive,jh7110-pll"; + clocks = <&osc>; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/starfive,jh7110-stgcrg.yaml b/Documentation/devicetree/bindings/clock/starfive,jh7110-stgcrg.yaml new file mode 100644 index 000000000000..b64ccd84200a --- /dev/null +++ b/Documentation/devicetree/bindings/clock/starfive,jh7110-stgcrg.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/starfive,jh7110-stgcrg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive JH7110 System-Top-Group Clock and Reset Generator + +maintainers: + - Xingyu Wu <xingyu.wu@starfivetech.com> + +properties: + compatible: + const: starfive,jh7110-stgcrg + + reg: + maxItems: 1 + + clocks: + items: + - description: Main Oscillator (24 MHz) + - description: HIFI4 core + - description: STG AXI/AHB + - description: USB (125 MHz) + - description: CPU Bus + - description: HIFI4 Axi + - description: NOC STG Bus + - description: APB Bus + + clock-names: + items: + - const: osc + - const: hifi4_core + - const: stg_axiahb + - const: usb_125m + - const: cpu_bus + - const: hifi4_axi + - const: nocstg_bus + - const: apb_bus + + '#clock-cells': + const: 1 + description: + See <dt-bindings/clock/starfive,jh7110-crg.h> for valid indices. + + '#reset-cells': + const: 1 + description: + See <dt-bindings/reset/starfive,jh7110-crg.h> for valid indices. + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - '#reset-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/starfive,jh7110-crg.h> + + stgcrg: clock-controller@10230000 { + compatible = "starfive,jh7110-stgcrg"; + reg = <0x10230000 0x10000>; + clocks = <&osc>, + <&syscrg JH7110_SYSCLK_HIFI4_CORE>, + <&syscrg JH7110_SYSCLK_STG_AXIAHB>, + <&syscrg JH7110_SYSCLK_USB_125M>, + <&syscrg JH7110_SYSCLK_CPU_BUS>, + <&syscrg JH7110_SYSCLK_HIFI4_AXI>, + <&syscrg JH7110_SYSCLK_NOCSTG_BUS>, + <&syscrg JH7110_SYSCLK_APB_BUS>; + clock-names = "osc", "hifi4_core", + "stg_axiahb", "usb_125m", + "cpu_bus", "hifi4_axi", + "nocstg_bus", "apb_bus"; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/starfive,jh7110-syscrg.yaml b/Documentation/devicetree/bindings/clock/starfive,jh7110-syscrg.yaml index 84373ae31644..5ba0a885aa80 100644 --- a/Documentation/devicetree/bindings/clock/starfive,jh7110-syscrg.yaml +++ b/Documentation/devicetree/bindings/clock/starfive,jh7110-syscrg.yaml @@ -27,6 +27,9 @@ properties: - description: External I2S RX left/right channel clock - description: External TDM clock - description: External audio master clock + - description: PLL0 + - description: PLL1 + - description: PLL2 - items: - description: Main Oscillator (24 MHz) @@ -38,6 +41,9 @@ properties: - description: External I2S RX left/right channel clock - description: External TDM clock - description: External audio master clock + - description: PLL0 + - description: PLL1 + - description: PLL2 clock-names: oneOf: @@ -52,6 +58,9 @@ properties: - const: i2srx_lrck_ext - const: tdm_ext - const: mclk_ext + - const: pll0_out + - const: pll1_out + - const: pll2_out - items: - const: osc @@ -63,6 +72,9 @@ properties: - const: i2srx_lrck_ext - const: tdm_ext - const: mclk_ext + - const: pll0_out + - const: pll1_out + - const: pll2_out '#clock-cells': const: 1 @@ -93,12 +105,14 @@ examples: <&gmac1_rgmii_rxin>, <&i2stx_bclk_ext>, <&i2stx_lrck_ext>, <&i2srx_bclk_ext>, <&i2srx_lrck_ext>, - <&tdm_ext>, <&mclk_ext>; + <&tdm_ext>, <&mclk_ext>, + <&pllclk 0>, <&pllclk 1>, <&pllclk 2>; clock-names = "osc", "gmac1_rmii_refin", "gmac1_rgmii_rxin", "i2stx_bclk_ext", "i2stx_lrck_ext", "i2srx_bclk_ext", "i2srx_lrck_ext", - "tdm_ext", "mclk_ext"; + "tdm_ext", "mclk_ext", + "pll0_out", "pll1_out", "pll2_out"; #clock-cells = <1>; #reset-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/clock/starfive,jh7110-voutcrg.yaml b/Documentation/devicetree/bindings/clock/starfive,jh7110-voutcrg.yaml new file mode 100644 index 000000000000..af77bd8c86b1 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/starfive,jh7110-voutcrg.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/starfive,jh7110-voutcrg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive JH7110 Video-Output Clock and Reset Generator + +maintainers: + - Xingyu Wu <xingyu.wu@starfivetech.com> + +properties: + compatible: + const: starfive,jh7110-voutcrg + + reg: + maxItems: 1 + + clocks: + items: + - description: Vout Top core + - description: Vout Top Ahb + - description: Vout Top Axi + - description: Vout Top HDMI MCLK + - description: I2STX0 BCLK + - description: external HDMI pixel + + clock-names: + items: + - const: vout_src + - const: vout_top_ahb + - const: vout_top_axi + - const: vout_top_hdmitx0_mclk + - const: i2stx0_bclk + - const: hdmitx0_pixelclk + + resets: + maxItems: 1 + description: Vout Top core + + '#clock-cells': + const: 1 + description: + See <dt-bindings/clock/starfive,jh7110-crg.h> for valid indices. + + '#reset-cells': + const: 1 + description: + See <dt-bindings/reset/starfive,jh7110-crg.h> for valid indices. + + power-domains: + maxItems: 1 + description: + Vout domain power + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - '#clock-cells' + - '#reset-cells' + - power-domains + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/starfive,jh7110-crg.h> + #include <dt-bindings/power/starfive,jh7110-pmu.h> + #include <dt-bindings/reset/starfive,jh7110-crg.h> + + voutcrg: clock-controller@295C0000 { + compatible = "starfive,jh7110-voutcrg"; + reg = <0x295C0000 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_VOUT_SRC>, + <&syscrg JH7110_SYSCLK_VOUT_TOP_AHB>, + <&syscrg JH7110_SYSCLK_VOUT_TOP_AXI>, + <&syscrg JH7110_SYSCLK_VOUT_TOP_HDMITX0_MCLK>, + <&syscrg JH7110_SYSCLK_I2STX0_BCLK>, + <&hdmitx0_pixelclk>; + clock-names = "vout_src", "vout_top_ahb", + "vout_top_axi", "vout_top_hdmitx0_mclk", + "i2stx0_bclk", "hdmitx0_pixelclk"; + resets = <&syscrg JH7110_SYSRST_VOUT_TOP_SRC>; + #clock-cells = <1>; + #reset-cells = <1>; + power-domains = <&pwrc JH7110_PD_VOUT>; + }; diff --git a/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml b/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml new file mode 100644 index 000000000000..0039319e91fe --- /dev/null +++ b/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml @@ -0,0 +1,93 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/starfive/starfive,jh7110-syscon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive JH7110 SoC system controller + +maintainers: + - William Qiu <william.qiu@starfivetech.com> + +description: + The StarFive JH7110 SoC system controller provides register information such + as offset, mask and shift to configure related modules such as MMC and PCIe. + +properties: + compatible: + oneOf: + - items: + - const: starfive,jh7110-sys-syscon + - const: syscon + - const: simple-mfd + - items: + - enum: + - starfive,jh7110-aon-syscon + - starfive,jh7110-stg-syscon + - const: syscon + + reg: + maxItems: 1 + + clock-controller: + $ref: /schemas/clock/starfive,jh7110-pll.yaml# + type: object + + "#power-domain-cells": + const: 1 + +required: + - compatible + - reg + +allOf: + - if: + properties: + compatible: + contains: + const: starfive,jh7110-sys-syscon + then: + required: + - clock-controller + else: + properties: + clock-controller: false + - if: + properties: + compatible: + contains: + const: starfive,jh7110-aon-syscon + then: + required: + - "#power-domain-cells" + else: + properties: + "#power-domain-cells": false + +additionalProperties: false + +examples: + - | + syscon@10240000 { + compatible = "starfive,jh7110-stg-syscon", "syscon"; + reg = <0x10240000 0x1000>; + }; + + syscon@13030000 { + compatible = "starfive,jh7110-sys-syscon", "syscon", "simple-mfd"; + reg = <0x13030000 0x1000>; + + clock-controller { + compatible = "starfive,jh7110-pll"; + clocks = <&osc>; + #clock-cells = <1>; + }; + }; + + syscon@17010000 { + compatible = "starfive,jh7110-aon-syscon", "syscon"; + reg = <0x17010000 0x1000>; + #power-domain-cells = <1>; + }; + +... diff --git a/MAINTAINERS b/MAINTAINERS index aee340630eca..44b4358c3c3a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -20282,6 +20282,12 @@ S: Supported F: Documentation/devicetree/bindings/mmc/starfive* F: drivers/mmc/host/dw_mmc-starfive.c +STARFIVE JH7110 SYSCON +M: William Qiu <william.qiu@starfivetech.com> +M: Xingyu Wu <xingyu.wu@starfivetech.com> +S: Supported +F: Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml + STARFIVE JH7110 TDM DRIVER M: Walker Chen <walker.chen@starfivetech.com> S: Maintained @@ -20331,6 +20337,7 @@ STARFIVE SOC DRIVERS M: Conor Dooley <conor@kernel.org> S: Maintained T: git https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git/ +F: Documentation/devicetree/bindings/soc/starfive/ F: drivers/soc/starfive/ STARFIVE TRNG DRIVER diff --git a/arch/riscv/boot/dts/starfive/Makefile b/arch/riscv/boot/dts/starfive/Makefile index 170956846d49..0141504c0f5c 100644 --- a/arch/riscv/boot/dts/starfive/Makefile +++ b/arch/riscv/boot/dts/starfive/Makefile @@ -1,4 +1,10 @@ # SPDX-License-Identifier: GPL-2.0 +# Enables support for device-tree overlays +DTC_FLAGS_jh7100-beaglev-starlight := -@ +DTC_FLAGS_jh7100-starfive-visionfive-v1 := -@ +DTC_FLAGS_jh7110-starfive-visionfive-2-v1.2a := -@ +DTC_FLAGS_jh7110-starfive-visionfive-2-v1.3b := -@ + dtb-$(CONFIG_ARCH_STARFIVE) += jh7100-beaglev-starlight.dtb dtb-$(CONFIG_ARCH_STARFIVE) += jh7100-starfive-visionfive-v1.dtb diff --git a/arch/riscv/boot/dts/starfive/jh7100.dtsi b/arch/riscv/boot/dts/starfive/jh7100.dtsi index 4218621ea3b9..35ab54fb235f 100644 --- a/arch/riscv/boot/dts/starfive/jh7100.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7100.dtsi @@ -80,6 +80,31 @@ }; }; + thermal-zones { + cpu-thermal { + polling-delay-passive = <250>; + polling-delay = <15000>; + + thermal-sensors = <&sfctemp>; + + trips { + cpu_alert0 { + /* milliCelsius */ + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit { + /* milliCelsius */ + temperature = <90000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + osc_sys: osc_sys { compatible = "fixed-clock"; #clock-cells = <0>; @@ -248,5 +273,17 @@ resets = <&rstgen JH7100_RSTN_WDTIMER_APB>, <&rstgen JH7100_RSTN_WDT>; }; + + sfctemp: temperature-sensor@124a0000 { + compatible = "starfive,jh7100-temp"; + reg = <0x0 0x124a0000 0x0 0x10000>; + clocks = <&clkgen JH7100_CLK_TEMP_SENSE>, + <&clkgen JH7100_CLK_TEMP_APB>; + clock-names = "sense", "bus"; + resets = <&rstgen JH7100_RSTN_TEMP_SENSE>, + <&rstgen JH7100_RSTN_TEMP_APB>; + reset-names = "sense", "bus"; + #thermal-sensor-cells = <0>; + }; }; }; diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.2a.dts b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.2a.dts index 4af3300f3cf3..205a13d8c8b1 100644 --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.2a.dts +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.2a.dts @@ -11,3 +11,16 @@ model = "StarFive VisionFive 2 v1.2A"; compatible = "starfive,visionfive-2-v1.2a", "starfive,jh7110"; }; + +&gmac1 { + phy-mode = "rmii"; + assigned-clocks = <&syscrg JH7110_SYSCLK_GMAC1_TX>, + <&syscrg JH7110_SYSCLK_GMAC1_RX>; + assigned-clock-parents = <&syscrg JH7110_SYSCLK_GMAC1_RMII_RTX>, + <&syscrg JH7110_SYSCLK_GMAC1_RMII_RTX>; +}; + +&phy0 { + rx-internal-delay-ps = <1900>; + tx-internal-delay-ps = <1350>; +}; diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts index 9230cc3d8946..d4ea4a2c0b9b 100644 --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts @@ -11,3 +11,34 @@ model = "StarFive VisionFive 2 v1.3B"; compatible = "starfive,visionfive-2-v1.3b", "starfive,jh7110"; }; + +&gmac0 { + starfive,tx-use-rgmii-clk; + assigned-clocks = <&aoncrg JH7110_AONCLK_GMAC0_TX>; + assigned-clock-parents = <&aoncrg JH7110_AONCLK_GMAC0_RMII_RTX>; +}; + +&gmac1 { + starfive,tx-use-rgmii-clk; + assigned-clocks = <&syscrg JH7110_SYSCLK_GMAC1_TX>; + assigned-clock-parents = <&syscrg JH7110_SYSCLK_GMAC1_RMII_RTX>; +}; + +&phy0 { + motorcomm,tx-clk-adj-enabled; + motorcomm,tx-clk-100-inverted; + motorcomm,tx-clk-1000-inverted; + motorcomm,rx-clk-drv-microamp = <3970>; + motorcomm,rx-data-drv-microamp = <2910>; + rx-internal-delay-ps = <1500>; + tx-internal-delay-ps = <1500>; +}; + +&phy1 { + motorcomm,tx-clk-adj-enabled; + motorcomm,tx-clk-100-inverted; + motorcomm,rx-clk-drv-microamp = <3970>; + motorcomm,rx-data-drv-microamp = <2910>; + rx-internal-delay-ps = <300>; + tx-internal-delay-ps = <0>; +}; diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi index fa0061eb33a7..d79f94432b27 100644 --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi @@ -11,10 +11,14 @@ / { aliases { + ethernet0 = &gmac0; + ethernet1 = &gmac1; i2c0 = &i2c0; i2c2 = &i2c2; i2c5 = &i2c5; i2c6 = &i2c6; + mmc0 = &mmc0; + mmc1 = &mmc1; serial0 = &uart0; }; @@ -38,6 +42,10 @@ }; }; +&dvp_clk { + clock-frequency = <74250000>; +}; + &gmac0_rgmii_rxin { clock-frequency = <125000000>; }; @@ -54,6 +62,10 @@ clock-frequency = <50000000>; }; +&hdmitx0_pixelclk { + clock-frequency = <297000000>; +}; + &i2srx_bclk_ext { clock-frequency = <12288000>; }; @@ -86,6 +98,38 @@ clock-frequency = <49152000>; }; +&gmac0 { + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; +}; + +&gmac1 { + phy-handle = <&phy1>; + phy-mode = "rgmii-id"; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + phy1: ethernet-phy@1 { + reg = <0>; + }; + }; +}; + &i2c0 { clock-frequency = <100000>; i2c-sda-hold-time-ns = <300>; @@ -123,12 +167,28 @@ #interrupt-cells = <1>; regulators { + vcc_3v3: dcdc1 { + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3"; + }; + vdd_cpu: dcdc2 { regulator-always-on; regulator-min-microvolt = <500000>; regulator-max-microvolt = <1540000>; regulator-name = "vdd-cpu"; }; + + emmc_vdd: aldo4 { + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "emmc_vdd"; + }; }; }; }; @@ -143,6 +203,83 @@ status = "okay"; }; +&mmc0 { + max-frequency = <100000000>; + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + non-removable; + cap-mmc-hw-reset; + post-power-on-delay-ms = <200>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&emmc_vdd>; + status = "okay"; +}; + +&mmc1 { + max-frequency = <100000000>; + bus-width = <4>; + no-sdio; + no-mmc; + broken-cd; + cap-sd-highspeed; + post-power-on-delay-ms = <200>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + status = "okay"; +}; + +&qspi { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + nor_flash: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + cdns,read-delay = <5>; + spi-max-frequency = <12000000>; + cdns,tshsl-ns = <1>; + cdns,tsd2d-ns = <1>; + cdns,tchsh-ns = <1>; + cdns,tslch-ns = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + spl@0 { + reg = <0x0 0x80000>; + }; + uboot-env@f0000 { + reg = <0xf0000 0x10000>; + }; + uboot@100000 { + reg = <0x100000 0x400000>; + }; + reserved-data@600000 { + reg = <0x600000 0x1000000>; + }; + }; + }; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + status = "okay"; + + spi_dev0: spi@0 { + compatible = "rohm,dh2228fv"; + reg = <0>; + spi-max-frequency = <10000000>; + }; +}; + &sysgpio { i2c0_pins: i2c0-0 { i2c-pins { @@ -200,6 +337,109 @@ }; }; + mmc0_pins: mmc0-0 { + rst-pins { + pinmux = <GPIOMUX(62, GPOUT_SYS_SDIO0_RST, + GPOEN_ENABLE, + GPI_NONE)>; + bias-pull-up; + drive-strength = <12>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + + mmc-pins { + pinmux = <PINMUX(64, 0)>, + <PINMUX(65, 0)>, + <PINMUX(66, 0)>, + <PINMUX(67, 0)>, + <PINMUX(68, 0)>, + <PINMUX(69, 0)>, + <PINMUX(70, 0)>, + <PINMUX(71, 0)>, + <PINMUX(72, 0)>, + <PINMUX(73, 0)>; + bias-pull-up; + drive-strength = <12>; + input-enable; + }; + }; + + mmc1_pins: mmc1-0 { + clk-pins { + pinmux = <GPIOMUX(10, GPOUT_SYS_SDIO1_CLK, + GPOEN_ENABLE, + GPI_NONE)>; + bias-pull-up; + drive-strength = <12>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + + mmc-pins { + pinmux = <GPIOMUX(9, GPOUT_SYS_SDIO1_CMD, + GPOEN_SYS_SDIO1_CMD, + GPI_SYS_SDIO1_CMD)>, + <GPIOMUX(11, GPOUT_SYS_SDIO1_DATA0, + GPOEN_SYS_SDIO1_DATA0, + GPI_SYS_SDIO1_DATA0)>, + <GPIOMUX(12, GPOUT_SYS_SDIO1_DATA1, + GPOEN_SYS_SDIO1_DATA1, + GPI_SYS_SDIO1_DATA1)>, + <GPIOMUX(7, GPOUT_SYS_SDIO1_DATA2, + GPOEN_SYS_SDIO1_DATA2, + GPI_SYS_SDIO1_DATA2)>, + <GPIOMUX(8, GPOUT_SYS_SDIO1_DATA3, + GPOEN_SYS_SDIO1_DATA3, + GPI_SYS_SDIO1_DATA3)>; + bias-pull-up; + drive-strength = <12>; + input-enable; + input-schmitt-enable; + slew-rate = <0>; + }; + }; + + spi0_pins: spi0-0 { + mosi-pins { + pinmux = <GPIOMUX(52, GPOUT_SYS_SPI0_TXD, + GPOEN_ENABLE, + GPI_NONE)>; + bias-disable; + input-disable; + input-schmitt-disable; + }; + + miso-pins { + pinmux = <GPIOMUX(53, GPOUT_LOW, + GPOEN_DISABLE, + GPI_SYS_SPI0_RXD)>; + bias-pull-up; + input-enable; + input-schmitt-enable; + }; + + sck-pins { + pinmux = <GPIOMUX(48, GPOUT_SYS_SPI0_CLK, + GPOEN_ENABLE, + GPI_SYS_SPI0_CLK)>; + bias-disable; + input-disable; + input-schmitt-disable; + }; + + ss-pins { + pinmux = <GPIOMUX(48, GPOUT_SYS_SPI0_FSS, + GPOEN_ENABLE, + GPI_SYS_SPI0_FSS)>; + bias-disable; + input-disable; + input-schmitt-disable; + }; + }; + uart0_pins: uart0-0 { tx-pins { pinmux = <GPIOMUX(5, GPOUT_SYS_UART0_TX, @@ -223,6 +463,46 @@ slew-rate = <0>; }; }; + + tdm_pins: tdm-0 { + tx-pins { + pinmux = <GPIOMUX(44, GPOUT_SYS_TDM_TXD, + GPOEN_ENABLE, + GPI_NONE)>; + bias-pull-up; + drive-strength = <2>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + + rx-pins { + pinmux = <GPIOMUX(61, GPOUT_HIGH, + GPOEN_DISABLE, + GPI_SYS_TDM_RXD)>; + input-enable; + }; + + sync-pins { + pinmux = <GPIOMUX(63, GPOUT_HIGH, + GPOEN_DISABLE, + GPI_SYS_TDM_SYNC)>; + input-enable; + }; + + pcmclk-pins { + pinmux = <GPIOMUX(38, GPOUT_HIGH, + GPOEN_DISABLE, + GPI_SYS_TDM_CLK)>; + input-enable; + }; + }; +}; + +&tdm { + pinctrl-names = "default"; + pinctrl-0 = <&tdm_pins>; + status = "okay"; }; &uart0 { @@ -231,6 +511,10 @@ status = "okay"; }; +&usb0 { + dr_mode = "peripheral"; +}; + &U74_1 { cpu-supply = <&vdd_cpu>; }; diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi index ec2e70011a73..9aa563898868 100644 --- a/arch/riscv/boot/dts/starfive/jh7110.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi @@ -6,7 +6,9 @@ /dts-v1/; #include <dt-bindings/clock/starfive,jh7110-crg.h> +#include <dt-bindings/power/starfive,jh7110-pmu.h> #include <dt-bindings/reset/starfive,jh7110-crg.h> +#include <dt-bindings/thermal/thermal.h> / { compatible = "starfive,jh7110"; @@ -56,6 +58,7 @@ operating-points-v2 = <&cpu_opp>; clocks = <&syscrg JH7110_SYSCLK_CPU_CORE>; clock-names = "cpu"; + #cooling-cells = <2>; cpu1_intc: interrupt-controller { compatible = "riscv,cpu-intc"; @@ -85,6 +88,7 @@ operating-points-v2 = <&cpu_opp>; clocks = <&syscrg JH7110_SYSCLK_CPU_CORE>; clock-names = "cpu"; + #cooling-cells = <2>; cpu2_intc: interrupt-controller { compatible = "riscv,cpu-intc"; @@ -114,6 +118,7 @@ operating-points-v2 = <&cpu_opp>; clocks = <&syscrg JH7110_SYSCLK_CPU_CORE>; clock-names = "cpu"; + #cooling-cells = <2>; cpu3_intc: interrupt-controller { compatible = "riscv,cpu-intc"; @@ -143,6 +148,7 @@ operating-points-v2 = <&cpu_opp>; clocks = <&syscrg JH7110_SYSCLK_CPU_CORE>; clock-names = "cpu"; + #cooling-cells = <2>; cpu4_intc: interrupt-controller { compatible = "riscv,cpu-intc"; @@ -197,6 +203,47 @@ }; }; + thermal-zones { + cpu-thermal { + polling-delay-passive = <250>; + polling-delay = <15000>; + + thermal-sensors = <&sfctemp>; + + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = + <&U74_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&U74_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&U74_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&U74_4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + cpu_alert0: cpu_alert0 { + /* milliCelsius */ + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit { + /* milliCelsius */ + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + + dvp_clk: dvp-clock { + compatible = "fixed-clock"; + clock-output-names = "dvp_clk"; + #clock-cells = <0>; + }; gmac0_rgmii_rxin: gmac0-rgmii-rxin-clock { compatible = "fixed-clock"; clock-output-names = "gmac0_rgmii_rxin"; @@ -221,6 +268,12 @@ #clock-cells = <0>; }; + hdmitx0_pixelclk: hdmitx0-pixel-clock { + compatible = "fixed-clock"; + clock-output-names = "hdmitx0_pixelclk"; + #clock-cells = <0>; + }; + i2srx_bclk_ext: i2srx-bclk-ext-clock { compatible = "fixed-clock"; clock-output-names = "i2srx_bclk_ext"; @@ -263,6 +316,13 @@ #clock-cells = <0>; }; + stmmac_axi_setup: stmmac-axi-config { + snps,lpi_en; + snps,wr_osr_lmt = <15>; + snps,rd_osr_lmt = <15>; + snps,blen = <256 128 64 32 0 0 0>; + }; + tdm_ext: tdm-ext-clock { compatible = "fixed-clock"; clock-output-names = "tdm_ext"; @@ -386,6 +446,149 @@ status = "disabled"; }; + spi0: spi@10060000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x0 0x10060000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_SPI0_APB>, + <&syscrg JH7110_SYSCLK_SPI0_APB>; + clock-names = "sspclk", "apb_pclk"; + resets = <&syscrg JH7110_SYSRST_SPI0_APB>; + interrupts = <38>; + arm,primecell-periphid = <0x00041022>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@10070000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x0 0x10070000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_SPI1_APB>, + <&syscrg JH7110_SYSCLK_SPI1_APB>; + clock-names = "sspclk", "apb_pclk"; + resets = <&syscrg JH7110_SYSRST_SPI1_APB>; + interrupts = <39>; + arm,primecell-periphid = <0x00041022>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@10080000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x0 0x10080000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_SPI2_APB>, + <&syscrg JH7110_SYSCLK_SPI2_APB>; + clock-names = "sspclk", "apb_pclk"; + resets = <&syscrg JH7110_SYSRST_SPI2_APB>; + interrupts = <40>; + arm,primecell-periphid = <0x00041022>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + tdm: tdm@10090000 { + compatible = "starfive,jh7110-tdm"; + reg = <0x0 0x10090000 0x0 0x1000>; + clocks = <&syscrg JH7110_SYSCLK_TDM_AHB>, + <&syscrg JH7110_SYSCLK_TDM_APB>, + <&syscrg JH7110_SYSCLK_TDM_INTERNAL>, + <&syscrg JH7110_SYSCLK_TDM_TDM>, + <&syscrg JH7110_SYSCLK_MCLK_INNER>, + <&tdm_ext>; + clock-names = "tdm_ahb", "tdm_apb", + "tdm_internal", "tdm", + "mclk_inner", "tdm_ext"; + resets = <&syscrg JH7110_SYSRST_TDM_AHB>, + <&syscrg JH7110_SYSRST_TDM_APB>, + <&syscrg JH7110_SYSRST_TDM_CORE>; + dmas = <&dma 20>, <&dma 21>; + dma-names = "rx","tx"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + usb0: usb@10100000 { + compatible = "starfive,jh7110-usb"; + ranges = <0x0 0x0 0x10100000 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + starfive,stg-syscon = <&stg_syscon 0x4>; + clocks = <&stgcrg JH7110_STGCLK_USB0_LPM>, + <&stgcrg JH7110_STGCLK_USB0_STB>, + <&stgcrg JH7110_STGCLK_USB0_APB>, + <&stgcrg JH7110_STGCLK_USB0_AXI>, + <&stgcrg JH7110_STGCLK_USB0_UTMI_APB>; + clock-names = "lpm", "stb", "apb", "axi", "utmi_apb"; + resets = <&stgcrg JH7110_STGRST_USB0_PWRUP>, + <&stgcrg JH7110_STGRST_USB0_APB>, + <&stgcrg JH7110_STGRST_USB0_AXI>, + <&stgcrg JH7110_STGRST_USB0_UTMI_APB>; + reset-names = "pwrup", "apb", "axi", "utmi_apb"; + status = "disabled"; + + usb_cdns3: usb@0 { + compatible = "cdns,usb3"; + reg = <0x0 0x10000>, + <0x10000 0x10000>, + <0x20000 0x10000>; + reg-names = "otg", "xhci", "dev"; + interrupts = <100>, <108>, <110>; + interrupt-names = "host", "peripheral", "otg"; + phys = <&usbphy0>; + phy-names = "cdns3,usb2-phy"; + }; + }; + + usbphy0: phy@10200000 { + compatible = "starfive,jh7110-usb-phy"; + reg = <0x0 0x10200000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_USB_125M>, + <&stgcrg JH7110_STGCLK_USB0_APP_125>; + clock-names = "125m", "app_125m"; + #phy-cells = <0>; + }; + + pciephy0: phy@10210000 { + compatible = "starfive,jh7110-pcie-phy"; + reg = <0x0 0x10210000 0x0 0x10000>; + #phy-cells = <0>; + }; + + pciephy1: phy@10220000 { + compatible = "starfive,jh7110-pcie-phy"; + reg = <0x0 0x10220000 0x0 0x10000>; + #phy-cells = <0>; + }; + + stgcrg: clock-controller@10230000 { + compatible = "starfive,jh7110-stgcrg"; + reg = <0x0 0x10230000 0x0 0x10000>; + clocks = <&osc>, + <&syscrg JH7110_SYSCLK_HIFI4_CORE>, + <&syscrg JH7110_SYSCLK_STG_AXIAHB>, + <&syscrg JH7110_SYSCLK_USB_125M>, + <&syscrg JH7110_SYSCLK_CPU_BUS>, + <&syscrg JH7110_SYSCLK_HIFI4_AXI>, + <&syscrg JH7110_SYSCLK_NOCSTG_BUS>, + <&syscrg JH7110_SYSCLK_APB_BUS>; + clock-names = "osc", "hifi4_core", + "stg_axiahb", "usb_125m", + "cpu_bus", "hifi4_axi", + "nocstg_bus", "apb_bus"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + stg_syscon: syscon@10240000 { + compatible = "starfive,jh7110-stg-syscon", "syscon"; + reg = <0x0 0x10240000 0x0 0x1000>; + }; + uart3: serial@12000000 { compatible = "snps,dw-apb-uart"; reg = <0x0 0x12000000 0x0 0x10000>; @@ -473,6 +676,97 @@ status = "disabled"; }; + qspi: spi@13010000 { + compatible = "starfive,jh7110-qspi", "cdns,qspi-nor"; + reg = <0x0 0x13010000 0x0 0x10000>, + <0x0 0x21000000 0x0 0x400000>; + interrupts = <25>; + clocks = <&syscrg JH7110_SYSCLK_QSPI_REF>, + <&syscrg JH7110_SYSCLK_QSPI_AHB>, + <&syscrg JH7110_SYSCLK_QSPI_APB>; + clock-names = "ref", "ahb", "apb"; + resets = <&syscrg JH7110_SYSRST_QSPI_APB>, + <&syscrg JH7110_SYSRST_QSPI_AHB>, + <&syscrg JH7110_SYSRST_QSPI_REF>; + reset-names = "qspi", "qspi-ocp", "rstc_ref"; + cdns,fifo-depth = <256>; + cdns,fifo-width = <4>; + cdns,trigger-address = <0x0>; + status = "disabled"; + }; + + spi3: spi@12070000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x0 0x12070000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_SPI3_APB>, + <&syscrg JH7110_SYSCLK_SPI3_APB>; + clock-names = "sspclk", "apb_pclk"; + resets = <&syscrg JH7110_SYSRST_SPI3_APB>; + interrupts = <52>; + arm,primecell-periphid = <0x00041022>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi4: spi@12080000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x0 0x12080000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_SPI4_APB>, + <&syscrg JH7110_SYSCLK_SPI4_APB>; + clock-names = "sspclk", "apb_pclk"; + resets = <&syscrg JH7110_SYSRST_SPI4_APB>; + interrupts = <53>; + arm,primecell-periphid = <0x00041022>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi5: spi@12090000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x0 0x12090000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_SPI5_APB>, + <&syscrg JH7110_SYSCLK_SPI5_APB>; + clock-names = "sspclk", "apb_pclk"; + resets = <&syscrg JH7110_SYSRST_SPI5_APB>; + interrupts = <54>; + arm,primecell-periphid = <0x00041022>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi6: spi@120a0000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x0 0x120A0000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_SPI6_APB>, + <&syscrg JH7110_SYSCLK_SPI6_APB>; + clock-names = "sspclk", "apb_pclk"; + resets = <&syscrg JH7110_SYSRST_SPI6_APB>; + interrupts = <55>; + arm,primecell-periphid = <0x00041022>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + sfctemp: temperature-sensor@120e0000 { + compatible = "starfive,jh7110-temp"; + reg = <0x0 0x120e0000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_TEMP_CORE>, + <&syscrg JH7110_SYSCLK_TEMP_APB>; + clock-names = "sense", "bus"; + resets = <&syscrg JH7110_SYSRST_TEMP_CORE>, + <&syscrg JH7110_SYSRST_TEMP_APB>; + reset-names = "sense", "bus"; + #thermal-sensor-cells = <0>; + }; + syscrg: clock-controller@13020000 { compatible = "starfive,jh7110-syscrg"; reg = <0x0 0x13020000 0x0 0x10000>; @@ -480,16 +774,31 @@ <&gmac1_rgmii_rxin>, <&i2stx_bclk_ext>, <&i2stx_lrck_ext>, <&i2srx_bclk_ext>, <&i2srx_lrck_ext>, - <&tdm_ext>, <&mclk_ext>; + <&tdm_ext>, <&mclk_ext>, + <&pllclk JH7110_PLLCLK_PLL0_OUT>, + <&pllclk JH7110_PLLCLK_PLL1_OUT>, + <&pllclk JH7110_PLLCLK_PLL2_OUT>; clock-names = "osc", "gmac1_rmii_refin", "gmac1_rgmii_rxin", "i2stx_bclk_ext", "i2stx_lrck_ext", "i2srx_bclk_ext", "i2srx_lrck_ext", - "tdm_ext", "mclk_ext"; + "tdm_ext", "mclk_ext", + "pll0_out", "pll1_out", "pll2_out"; #clock-cells = <1>; #reset-cells = <1>; }; + sys_syscon: syscon@13030000 { + compatible = "starfive,jh7110-sys-syscon", "syscon", "simple-mfd"; + reg = <0x0 0x13030000 0x0 0x1000>; + + pllclk: clock-controller { + compatible = "starfive,jh7110-pll"; + clocks = <&osc>; + #clock-cells = <1>; + }; + }; + sysgpio: pinctrl@13040000 { compatible = "starfive,jh7110-sys-pinctrl"; reg = <0x0 0x13040000 0x0 0x10000>; @@ -512,6 +821,155 @@ <&syscrg JH7110_SYSRST_WDT_CORE>; }; + crypto: crypto@16000000 { + compatible = "starfive,jh7110-crypto"; + reg = <0x0 0x16000000 0x0 0x4000>; + clocks = <&stgcrg JH7110_STGCLK_SEC_AHB>, + <&stgcrg JH7110_STGCLK_SEC_MISC_AHB>; + clock-names = "hclk", "ahb"; + interrupts = <28>; + resets = <&stgcrg JH7110_STGRST_SEC_AHB>; + dmas = <&sdma 1 2>, <&sdma 0 2>; + dma-names = "tx", "rx"; + }; + + sdma: dma-controller@16008000 { + compatible = "arm,pl080", "arm,primecell"; + arm,primecell-periphid = <0x00041080>; + reg = <0x0 0x16008000 0x0 0x4000>; + interrupts = <29>; + clocks = <&stgcrg JH7110_STGCLK_SEC_AHB>; + clock-names = "apb_pclk"; + resets = <&stgcrg JH7110_STGRST_SEC_AHB>; + lli-bus-interface-ahb1; + mem-bus-interface-ahb1; + memcpy-burst-size = <256>; + memcpy-bus-width = <32>; + #dma-cells = <2>; + }; + + rng: rng@1600c000 { + compatible = "starfive,jh7110-trng"; + reg = <0x0 0x1600C000 0x0 0x4000>; + clocks = <&stgcrg JH7110_STGCLK_SEC_AHB>, + <&stgcrg JH7110_STGCLK_SEC_MISC_AHB>; + clock-names = "hclk", "ahb"; + resets = <&stgcrg JH7110_STGRST_SEC_AHB>; + interrupts = <30>; + }; + + mmc0: mmc@16010000 { + compatible = "starfive,jh7110-mmc"; + reg = <0x0 0x16010000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_SDIO0_AHB>, + <&syscrg JH7110_SYSCLK_SDIO0_SDCARD>; + clock-names = "biu","ciu"; + resets = <&syscrg JH7110_SYSRST_SDIO0_AHB>; + reset-names = "reset"; + interrupts = <74>; + fifo-depth = <32>; + fifo-watermark-aligned; + data-addr = <0>; + starfive,sysreg = <&sys_syscon 0x14 0x1a 0x7c000000>; + status = "disabled"; + }; + + mmc1: mmc@16020000 { + compatible = "starfive,jh7110-mmc"; + reg = <0x0 0x16020000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_SDIO1_AHB>, + <&syscrg JH7110_SYSCLK_SDIO1_SDCARD>; + clock-names = "biu","ciu"; + resets = <&syscrg JH7110_SYSRST_SDIO1_AHB>; + reset-names = "reset"; + interrupts = <75>; + fifo-depth = <32>; + fifo-watermark-aligned; + data-addr = <0>; + starfive,sysreg = <&sys_syscon 0x9c 0x1 0x3e>; + status = "disabled"; + }; + + gmac0: ethernet@16030000 { + compatible = "starfive,jh7110-dwmac", "snps,dwmac-5.20"; + reg = <0x0 0x16030000 0x0 0x10000>; + clocks = <&aoncrg JH7110_AONCLK_GMAC0_AXI>, + <&aoncrg JH7110_AONCLK_GMAC0_AHB>, + <&syscrg JH7110_SYSCLK_GMAC0_PTP>, + <&aoncrg JH7110_AONCLK_GMAC0_TX_INV>, + <&syscrg JH7110_SYSCLK_GMAC0_GTXC>; + clock-names = "stmmaceth", "pclk", "ptp_ref", + "tx", "gtx"; + resets = <&aoncrg JH7110_AONRST_GMAC0_AXI>, + <&aoncrg JH7110_AONRST_GMAC0_AHB>; + reset-names = "stmmaceth", "ahb"; + interrupts = <7>, <6>, <5>; + interrupt-names = "macirq", "eth_wake_irq", "eth_lpi"; + rx-fifo-depth = <2048>; + tx-fifo-depth = <2048>; + snps,multicast-filter-bins = <64>; + snps,perfect-filter-entries = <256>; + snps,fixed-burst; + snps,no-pbl-x8; + snps,force_thresh_dma_mode; + snps,axi-config = <&stmmac_axi_setup>; + snps,tso; + snps,en-tx-lpi-clockgating; + snps,txpbl = <16>; + snps,rxpbl = <16>; + starfive,syscon = <&aon_syscon 0xc 0x12>; + status = "disabled"; + }; + + gmac1: ethernet@16040000 { + compatible = "starfive,jh7110-dwmac", "snps,dwmac-5.20"; + reg = <0x0 0x16040000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_GMAC1_AXI>, + <&syscrg JH7110_SYSCLK_GMAC1_AHB>, + <&syscrg JH7110_SYSCLK_GMAC1_PTP>, + <&syscrg JH7110_SYSCLK_GMAC1_TX_INV>, + <&syscrg JH7110_SYSCLK_GMAC1_GTXC>; + clock-names = "stmmaceth", "pclk", "ptp_ref", + "tx", "gtx"; + resets = <&syscrg JH7110_SYSRST_GMAC1_AXI>, + <&syscrg JH7110_SYSRST_GMAC1_AHB>; + reset-names = "stmmaceth", "ahb"; + interrupts = <78>, <77>, <76>; + interrupt-names = "macirq", "eth_wake_irq", "eth_lpi"; + rx-fifo-depth = <2048>; + tx-fifo-depth = <2048>; + snps,multicast-filter-bins = <64>; + snps,perfect-filter-entries = <256>; + snps,fixed-burst; + snps,no-pbl-x8; + snps,force_thresh_dma_mode; + snps,axi-config = <&stmmac_axi_setup>; + snps,tso; + snps,en-tx-lpi-clockgating; + snps,txpbl = <16>; + snps,rxpbl = <16>; + starfive,syscon = <&sys_syscon 0x90 0x2>; + status = "disabled"; + }; + + dma: dma-controller@16050000 { + compatible = "starfive,jh7110-axi-dma"; + reg = <0x0 0x16050000 0x0 0x10000>; + clocks = <&stgcrg JH7110_STGCLK_DMA1P_AXI>, + <&stgcrg JH7110_STGCLK_DMA1P_AHB>; + clock-names = "core-clk", "cfgr-clk"; + resets = <&stgcrg JH7110_STGRST_DMA1P_AXI>, + <&stgcrg JH7110_STGRST_DMA1P_AHB>; + interrupts = <73>; + #dma-cells = <1>; + dma-channels = <4>; + snps,dma-masters = <1>; + snps,data-width = <3>; + snps,block-size = <65536 65536 65536 65536>; + snps,priority = <0 1 2 3>; + snps,axi-max-burst-len = <16>; + }; + aoncrg: clock-controller@17000000 { compatible = "starfive,jh7110-aoncrg"; reg = <0x0 0x17000000 0x0 0x10000>; @@ -529,6 +987,12 @@ #reset-cells = <1>; }; + aon_syscon: syscon@17010000 { + compatible = "starfive,jh7110-aon-syscon", "syscon"; + reg = <0x0 0x17010000 0x0 0x1000>; + #power-domain-cells = <1>; + }; + aongpio: pinctrl@17020000 { compatible = "starfive,jh7110-aon-pinctrl"; reg = <0x0 0x17020000 0x0 0x10000>; @@ -546,5 +1010,40 @@ interrupts = <111>; #power-domain-cells = <1>; }; + + ispcrg: clock-controller@19810000 { + compatible = "starfive,jh7110-ispcrg"; + reg = <0x0 0x19810000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_ISP_TOP_CORE>, + <&syscrg JH7110_SYSCLK_ISP_TOP_AXI>, + <&syscrg JH7110_SYSCLK_NOC_BUS_ISP_AXI>, + <&dvp_clk>; + clock-names = "isp_top_core", "isp_top_axi", + "noc_bus_isp_axi", "dvp_clk"; + resets = <&syscrg JH7110_SYSRST_ISP_TOP>, + <&syscrg JH7110_SYSRST_ISP_TOP_AXI>, + <&syscrg JH7110_SYSRST_NOC_BUS_ISP_AXI>; + #clock-cells = <1>; + #reset-cells = <1>; + power-domains = <&pwrc JH7110_PD_ISP>; + }; + + voutcrg: clock-controller@295c0000 { + compatible = "starfive,jh7110-voutcrg"; + reg = <0x0 0x295c0000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_VOUT_SRC>, + <&syscrg JH7110_SYSCLK_VOUT_TOP_AHB>, + <&syscrg JH7110_SYSCLK_VOUT_TOP_AXI>, + <&syscrg JH7110_SYSCLK_VOUT_TOP_HDMITX0_MCLK>, + <&syscrg JH7110_SYSCLK_I2STX0_BCLK>, + <&hdmitx0_pixelclk>; + clock-names = "vout_src", "vout_top_ahb", + "vout_top_axi", "vout_top_hdmitx0_mclk", + "i2stx0_bclk", "hdmitx0_pixelclk"; + resets = <&syscrg JH7110_SYSRST_VOUT_TOP_SRC>; + #clock-cells = <1>; + #reset-cells = <1>; + power-domains = <&pwrc JH7110_PD_VOUT>; + }; }; }; diff --git a/include/dt-bindings/clock/starfive,jh7110-crg.h b/include/dt-bindings/clock/starfive,jh7110-crg.h index 06257bfd9ac1..467ccab3bfaa 100644 --- a/include/dt-bindings/clock/starfive,jh7110-crg.h +++ b/include/dt-bindings/clock/starfive,jh7110-crg.h @@ -1,11 +1,18 @@ /* SPDX-License-Identifier: GPL-2.0 OR MIT */ /* * Copyright 2022 Emil Renner Berthing <kernel@esmil.dk> + * Copyright 2022 StarFive Technology Co., Ltd. */ #ifndef __DT_BINDINGS_CLOCK_STARFIVE_JH7110_CRG_H__ #define __DT_BINDINGS_CLOCK_STARFIVE_JH7110_CRG_H__ +/* PLL clocks */ +#define JH7110_PLLCLK_PLL0_OUT 0 +#define JH7110_PLLCLK_PLL1_OUT 1 +#define JH7110_PLLCLK_PLL2_OUT 2 +#define JH7110_PLLCLK_END 3 + /* SYSCRG clocks */ #define JH7110_SYSCLK_CPU_ROOT 0 #define JH7110_SYSCLK_CPU_CORE 1 @@ -218,4 +225,77 @@ #define JH7110_AONCLK_END 14 +/* STGCRG clocks */ +#define JH7110_STGCLK_HIFI4_CLK_CORE 0 +#define JH7110_STGCLK_USB0_APB 1 +#define JH7110_STGCLK_USB0_UTMI_APB 2 +#define JH7110_STGCLK_USB0_AXI 3 +#define JH7110_STGCLK_USB0_LPM 4 +#define JH7110_STGCLK_USB0_STB 5 +#define JH7110_STGCLK_USB0_APP_125 6 +#define JH7110_STGCLK_USB0_REFCLK 7 +#define JH7110_STGCLK_PCIE0_AXI_MST0 8 +#define JH7110_STGCLK_PCIE0_APB 9 +#define JH7110_STGCLK_PCIE0_TL 10 +#define JH7110_STGCLK_PCIE1_AXI_MST0 11 +#define JH7110_STGCLK_PCIE1_APB 12 +#define JH7110_STGCLK_PCIE1_TL 13 +#define JH7110_STGCLK_PCIE_SLV_MAIN 14 +#define JH7110_STGCLK_SEC_AHB 15 +#define JH7110_STGCLK_SEC_MISC_AHB 16 +#define JH7110_STGCLK_GRP0_MAIN 17 +#define JH7110_STGCLK_GRP0_BUS 18 +#define JH7110_STGCLK_GRP0_STG 19 +#define JH7110_STGCLK_GRP1_MAIN 20 +#define JH7110_STGCLK_GRP1_BUS 21 +#define JH7110_STGCLK_GRP1_STG 22 +#define JH7110_STGCLK_GRP1_HIFI 23 +#define JH7110_STGCLK_E2_RTC 24 +#define JH7110_STGCLK_E2_CORE 25 +#define JH7110_STGCLK_E2_DBG 26 +#define JH7110_STGCLK_DMA1P_AXI 27 +#define JH7110_STGCLK_DMA1P_AHB 28 + +#define JH7110_STGCLK_END 29 + +/* ISPCRG clocks */ +#define JH7110_ISPCLK_DOM4_APB_FUNC 0 +#define JH7110_ISPCLK_MIPI_RX0_PXL 1 +#define JH7110_ISPCLK_DVP_INV 2 +#define JH7110_ISPCLK_M31DPHY_CFG_IN 3 +#define JH7110_ISPCLK_M31DPHY_REF_IN 4 +#define JH7110_ISPCLK_M31DPHY_TX_ESC_LAN0 5 +#define JH7110_ISPCLK_VIN_APB 6 +#define JH7110_ISPCLK_VIN_SYS 7 +#define JH7110_ISPCLK_VIN_PIXEL_IF0 8 +#define JH7110_ISPCLK_VIN_PIXEL_IF1 9 +#define JH7110_ISPCLK_VIN_PIXEL_IF2 10 +#define JH7110_ISPCLK_VIN_PIXEL_IF3 11 +#define JH7110_ISPCLK_VIN_P_AXI_WR 12 +#define JH7110_ISPCLK_ISPV2_TOP_WRAPPER_C 13 + +#define JH7110_ISPCLK_END 14 + +/* VOUTCRG clocks */ +#define JH7110_VOUTCLK_APB 0 +#define JH7110_VOUTCLK_DC8200_PIX 1 +#define JH7110_VOUTCLK_DSI_SYS 2 +#define JH7110_VOUTCLK_TX_ESC 3 +#define JH7110_VOUTCLK_DC8200_AXI 4 +#define JH7110_VOUTCLK_DC8200_CORE 5 +#define JH7110_VOUTCLK_DC8200_AHB 6 +#define JH7110_VOUTCLK_DC8200_PIX0 7 +#define JH7110_VOUTCLK_DC8200_PIX1 8 +#define JH7110_VOUTCLK_DOM_VOUT_TOP_LCD 9 +#define JH7110_VOUTCLK_DSITX_APB 10 +#define JH7110_VOUTCLK_DSITX_SYS 11 +#define JH7110_VOUTCLK_DSITX_DPI 12 +#define JH7110_VOUTCLK_DSITX_TXESC 13 +#define JH7110_VOUTCLK_MIPITX_DPHY_TXESC 14 +#define JH7110_VOUTCLK_HDMI_TX_MCLK 15 +#define JH7110_VOUTCLK_HDMI_TX_BCLK 16 +#define JH7110_VOUTCLK_HDMI_TX_SYS 17 + +#define JH7110_VOUTCLK_END 18 + #endif /* __DT_BINDINGS_CLOCK_STARFIVE_JH7110_CRG_H__ */ diff --git a/include/dt-bindings/reset/starfive,jh7110-crg.h b/include/dt-bindings/reset/starfive,jh7110-crg.h index d78e38690ceb..eaf4a0d84f6a 100644 --- a/include/dt-bindings/reset/starfive,jh7110-crg.h +++ b/include/dt-bindings/reset/starfive,jh7110-crg.h @@ -1,6 +1,7 @@ /* SPDX-License-Identifier: GPL-2.0 OR MIT */ /* * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk> + * Copyright (C) 2022 StarFive Technology Co., Ltd. */ #ifndef __DT_BINDINGS_RESET_STARFIVE_JH7110_CRG_H__ @@ -151,4 +152,63 @@ #define JH7110_AONRST_END 8 +/* STGCRG resets */ +#define JH7110_STGRST_SYSCON 0 +#define JH7110_STGRST_HIFI4_CORE 1 +#define JH7110_STGRST_HIFI4_AXI 2 +#define JH7110_STGRST_SEC_AHB 3 +#define JH7110_STGRST_E24_CORE 4 +#define JH7110_STGRST_DMA1P_AXI 5 +#define JH7110_STGRST_DMA1P_AHB 6 +#define JH7110_STGRST_USB0_AXI 7 +#define JH7110_STGRST_USB0_APB 8 +#define JH7110_STGRST_USB0_UTMI_APB 9 +#define JH7110_STGRST_USB0_PWRUP 10 +#define JH7110_STGRST_PCIE0_AXI_MST0 11 +#define JH7110_STGRST_PCIE0_AXI_SLV0 12 +#define JH7110_STGRST_PCIE0_AXI_SLV 13 +#define JH7110_STGRST_PCIE0_BRG 14 +#define JH7110_STGRST_PCIE0_CORE 15 +#define JH7110_STGRST_PCIE0_APB 16 +#define JH7110_STGRST_PCIE1_AXI_MST0 17 +#define JH7110_STGRST_PCIE1_AXI_SLV0 18 +#define JH7110_STGRST_PCIE1_AXI_SLV 19 +#define JH7110_STGRST_PCIE1_BRG 20 +#define JH7110_STGRST_PCIE1_CORE 21 +#define JH7110_STGRST_PCIE1_APB 22 + +#define JH7110_STGRST_END 23 + +/* ISPCRG resets */ +#define JH7110_ISPRST_ISPV2_TOP_WRAPPER_P 0 +#define JH7110_ISPRST_ISPV2_TOP_WRAPPER_C 1 +#define JH7110_ISPRST_M31DPHY_HW 2 +#define JH7110_ISPRST_M31DPHY_B09_AON 3 +#define JH7110_ISPRST_VIN_APB 4 +#define JH7110_ISPRST_VIN_PIXEL_IF0 5 +#define JH7110_ISPRST_VIN_PIXEL_IF1 6 +#define JH7110_ISPRST_VIN_PIXEL_IF2 7 +#define JH7110_ISPRST_VIN_PIXEL_IF3 8 +#define JH7110_ISPRST_VIN_SYS 9 +#define JH7110_ISPRST_VIN_P_AXI_RD 10 +#define JH7110_ISPRST_VIN_P_AXI_WR 11 + +#define JH7110_ISPRST_END 12 + +/* VOUTCRG resets */ +#define JH7110_VOUTRST_DC8200_AXI 0 +#define JH7110_VOUTRST_DC8200_AHB 1 +#define JH7110_VOUTRST_DC8200_CORE 2 +#define JH7110_VOUTRST_DSITX_DPI 3 +#define JH7110_VOUTRST_DSITX_APB 4 +#define JH7110_VOUTRST_DSITX_RXESC 5 +#define JH7110_VOUTRST_DSITX_SYS 6 +#define JH7110_VOUTRST_DSITX_TXBYTEHS 7 +#define JH7110_VOUTRST_DSITX_TXESC 8 +#define JH7110_VOUTRST_HDMI_TX_HDMI 9 +#define JH7110_VOUTRST_MIPITX_DPHY_SYS 10 +#define JH7110_VOUTRST_MIPITX_DPHY_TXBYTEHS 11 + +#define JH7110_VOUTRST_END 12 + #endif /* __DT_BINDINGS_RESET_STARFIVE_JH7110_CRG_H__ */ |