diff options
Diffstat (limited to 'arch/arm/boot/dts/nxp')
56 files changed, 388 insertions, 122 deletions
diff --git a/arch/arm/boot/dts/nxp/imx/e70k02.dtsi b/arch/arm/boot/dts/nxp/imx/e70k02.dtsi index dcc3c9d488a8..3bb11c5a6353 100644 --- a/arch/arm/boot/dts/nxp/imx/e70k02.dtsi +++ b/arch/arm/boot/dts/nxp/imx/e70k02.dtsi @@ -69,6 +69,14 @@ reg = <0x80000000 0x20000000>; }; + epd_pmic_supply: regulator-epd-pmic-in { + compatible = "regulator-fixed"; + regulator-name = "epd_pmic_supply"; + gpio = <&gpio2 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <20000>; + }; + reg_wifi: regulator-wifi { compatible = "regulator-fixed"; regulator-name = "SD3_SPWR"; @@ -133,7 +141,22 @@ vdd-supply = <&ldo5_reg>; }; - /* TODO: SY7636 PMIC for E Ink at 0x62 */ + sy7636: pmic@62 { + compatible = "silergy,sy7636a"; + reg = <0x62>; + enable-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; + vcom-en-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; + epd-pwr-good-gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>; + vin-supply = <&epd_pmic_supply>; + + #thermal-sensor-cells = <0>; + + regulators { + reg_epdpmic: vcom { + regulator-name = "vcom"; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-ppd.dts b/arch/arm/boot/dts/nxp/imx/imx53-ppd.dts index 2892e457fea7..e45a97d3f449 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-ppd.dts +++ b/arch/arm/boot/dts/nxp/imx/imx53-ppd.dts @@ -537,6 +537,8 @@ mpl3115: pressure-sensor@60 { compatible = "fsl,mpl3115"; reg = <0x60>; + vdd-supply = <®_3v3>; + vddio-supply = <®_3v3>; }; eeprom: eeprom@50 { diff --git a/arch/arm/boot/dts/nxp/imx/imx53-qsrb.dts b/arch/arm/boot/dts/nxp/imx/imx53-qsrb.dts index 2f06ad61a766..6938ad6dbc2c 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-qsrb.dts +++ b/arch/arm/boot/dts/nxp/imx/imx53-qsrb.dts @@ -28,6 +28,7 @@ reg = <0x08>; interrupt-parent = <&gpio5>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH>; + fsl,mc13xxx-uses-rtc; regulators { sw1_reg: sw1a { regulator-name = "SW1"; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-usbarmory.dts b/arch/arm/boot/dts/nxp/imx/imx53-usbarmory.dts index acc44010d510..3ad9db4b1442 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-usbarmory.dts +++ b/arch/arm/boot/dts/nxp/imx/imx53-usbarmory.dts @@ -1,47 +1,10 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) /* * USB armory MkI device tree file * https://inversepath.com/usbarmory * * Copyright (C) 2015, Inverse Path * Andrej Rosano <andrej@inversepath.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_7.dts index a7400d42475b..bf8e07f97143 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_7.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_7.dts @@ -20,6 +20,7 @@ panel: panel { compatible = "lg,lb070wv8"; backlight = <&backlight>; + power-supply = <®_3p3v>; enable-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>; port { diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-b1x5v2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-b1x5v2.dtsi index 590dcc0953cc..5dc7f1f9ca17 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-b1x5v2.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-b1x5v2.dtsi @@ -47,7 +47,8 @@ mpl3115a2: pressure-sensor@60 { compatible = "fsl,mpl3115"; reg = <0x60>; - + vdd-supply = <®_3v3>; + vddio-supply = <®_3v3>; /* * The MPL3115 interrupts are connected to pin 22 and 23 * of &tca6424a, but the binding does not yet support diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-lanmcu.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-lanmcu.dts index 7c62db91173b..47a6d63c8e04 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-lanmcu.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-lanmcu.dts @@ -72,6 +72,7 @@ panel { compatible = "edt,etm0700g0bdh6"; backlight = <&backlight>; + power-supply = <®_panel>; port { panel_in: endpoint { @@ -89,6 +90,13 @@ enable-active-high; }; + reg_panel: regulator-panel { + compatible = "regulator-fixed"; + regulator-name = "panel"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + usdhc2_wifi_pwrseq: usdhc2-wifi-pwrseq { compatible = "mmc-pwrseq-simple"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-plym2m.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-plym2m.dts index dfa8110b1d97..0ef24a07dedf 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-plym2m.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-plym2m.dts @@ -123,7 +123,7 @@ }; }; - touch-thermal0 { + touch-0-thermal { polling-delay = <20000>; polling-delay-passive = <0>; thermal-sensors = <&touch_temp0>; @@ -137,7 +137,7 @@ }; }; - touch-thermal1 { + touch-1-thermal { polling-delay = <20000>; polling-delay-passive = <0>; thermal-sensors = <&touch_temp1>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-prtvt7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-prtvt7.dts index 29dc6875ab66..353f7097cb7e 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-prtvt7.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-prtvt7.dts @@ -55,7 +55,7 @@ iio-hwmon { compatible = "iio-hwmon"; - io-channels = <&vdiv_vaccu>; + io-channels = <&vdiv_vaccu 0>; }; keys { @@ -256,7 +256,7 @@ }; }; - touch-thermal0 { + touch-0-thermal { polling-delay = <20000>; polling-delay-passive = <0>; thermal-sensors = <&touch_temp0>; @@ -270,7 +270,7 @@ }; }; - touch-thermal1 { + touch-1-thermal { polling-delay = <20000>; polling-delay-passive = <0>; thermal-sensors = <&touch_temp1>; @@ -318,7 +318,7 @@ io-channels = <&adc_ts 2>; output-ohms = <2500>; full-ohms = <64000>; - #io-channel-cells = <0>; + #io-channel-cells = <1>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-qmx6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-qmx6.dtsi index 7a3b96315eaf..d5baec5e7a78 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-qmx6.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-qmx6.dtsi @@ -14,6 +14,7 @@ / { memory@10000000 { reg = <0x10000000 0x40000000>; + device_type = "memory"; }; reg_3p3v: 3p3v { diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-victgo.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-victgo.dts index 4875afadb630..76b0007d20ad 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-victgo.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-victgo.dts @@ -35,7 +35,7 @@ iio-hwmon { compatible = "iio-hwmon"; - io-channels = <&vdiv_vaccu>, <&vdiv_hitch_pos>; + io-channels = <&vdiv_vaccu 0>, <&vdiv_hitch_pos 0>; }; panel { @@ -84,7 +84,7 @@ }; }; - touch-thermal0 { + touch-0-thermal { polling-delay = <20000>; polling-delay-passive = <0>; thermal-sensors = <&touch_temp0>; @@ -98,7 +98,7 @@ }; }; - touch-thermal1 { + touch-1-thermal { polling-delay = <20000>; polling-delay-passive = <0>; thermal-sensors = <&touch_temp1>; @@ -147,7 +147,7 @@ io-channels = <&adc_ts 2>; output-ohms = <2500>; full-ohms = <64000>; - #io-channel-cells = <0>; + #io-channel-cells = <1>; }; vdiv_hitch_pos: voltage-divider-hitch-pos { @@ -155,7 +155,7 @@ io-channels = <&adc_ts 6>; output-ohms = <3300>; full-ohms = <13300>; - #io-channel-cells = <0>; + #io-channel-cells = <1>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi index 8bc6376d0dc1..4a5736526927 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi @@ -279,28 +279,32 @@ #size-cells = <0>; status = "disabled"; - led@0 { - chan-name = "R"; - led-cur = /bits/ 8 <0x20>; - max-cur = /bits/ 8 <0x60>; - reg = <0>; - color = <LED_COLOR_ID_RED>; - }; + multi-led@0 { + #address-cells = <1>; + #size-cells = <0>; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_INDICATOR; + + led@0 { + led-cur = /bits/ 8 <0x20>; + max-cur = /bits/ 8 <0x60>; + reg = <0>; + color = <LED_COLOR_ID_RED>; + }; - led@1 { - chan-name = "G"; - led-cur = /bits/ 8 <0x20>; - max-cur = /bits/ 8 <0x60>; - reg = <1>; - color = <LED_COLOR_ID_GREEN>; - }; + led@1 { + led-cur = /bits/ 8 <0x20>; + max-cur = /bits/ 8 <0x60>; + reg = <1>; + color = <LED_COLOR_ID_GREEN>; + }; - led@2 { - chan-name = "B"; - led-cur = /bits/ 8 <0x20>; - max-cur = /bits/ 8 <0x60>; - reg = <2>; - color = <LED_COLOR_ID_BLUE>; + led@2 { + led-cur = /bits/ 8 <0x20>; + max-cur = /bits/ 8 <0x60>; + reg = <2>; + color = <LED_COLOR_ID_BLUE>; + }; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-lynx.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-lynx.dts index 5c2cd517589b..0a6b668428a3 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-lynx.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-lynx.dts @@ -21,6 +21,10 @@ status = "okay"; }; +&beeper { + status = "okay"; +}; + &lcd_display { status = "okay"; }; @@ -37,6 +41,10 @@ status = "okay"; }; +&pwm3 { + status = "okay"; +}; + ®_usb_h1_vbus { status = "okay"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp43-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp43-common.dtsi index 2f42c56c21f6..6e49e1ccf6fc 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp43-common.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp43-common.dtsi @@ -26,6 +26,12 @@ status = "disabled"; }; + beeper: beeper { + compatible = "pwm-beeper"; + pwms = <&pwm3 0 500000 0>; + status = "disabled"; + }; + gpio_keys: gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -272,28 +278,32 @@ #size-cells = <0>; status = "disabled"; - led@0 { - chan-name = "R"; - led-cur = /bits/ 8 <0x6e>; - max-cur = /bits/ 8 <0xc8>; - reg = <0>; - color = <LED_COLOR_ID_RED>; - }; + multi-led@0 { + #address-cells = <1>; + #size-cells = <0>; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_INDICATOR; + + led@0 { + led-cur = /bits/ 8 <0x6e>; + max-cur = /bits/ 8 <0xc8>; + reg = <0>; + color = <LED_COLOR_ID_RED>; + }; - led@1 { - chan-name = "G"; - led-cur = /bits/ 8 <0xbe>; - max-cur = /bits/ 8 <0xc8>; - reg = <1>; - color = <LED_COLOR_ID_GREEN>; - }; + led@1 { + led-cur = /bits/ 8 <0xbe>; + max-cur = /bits/ 8 <0xc8>; + reg = <1>; + color = <LED_COLOR_ID_GREEN>; + }; - led@2 { - chan-name = "B"; - led-cur = /bits/ 8 <0xbe>; - max-cur = /bits/ 8 <0xc8>; - reg = <2>; - color = <LED_COLOR_ID_BLUE>; + led@2 { + led-cur = /bits/ 8 <0xbe>; + max-cur = /bits/ 8 <0xc8>; + reg = <2>; + color = <LED_COLOR_ID_BLUE>; + }; }; }; @@ -466,6 +476,13 @@ >; }; + pinctrl_sound: soundgrp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0 + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x8 + >; + }; + pinctrl_touch: touchgrp { fsl,pins = < MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b098 @@ -551,6 +568,12 @@ status = "disabled"; }; +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sound>; + status = "disabled"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dts b/arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dts index d3f14b4d3b51..929def2bb35e 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dts @@ -46,6 +46,7 @@ panel { compatible = "dataimage,fg1001l0dsswmg01"; backlight = <&backlight_lvds>; + power-supply = <®_lcd>; port { panel_in: endpoint { diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi index e1d0c6e123fd..1e2266a2368b 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi @@ -195,6 +195,8 @@ mma8453: mma8453@1c { compatible = "fsl,mma8453"; reg = <0x1c>; + vdd-supply = <®_3p3v>; + vddio-supply = <®_3p3v>; }; }; @@ -211,6 +213,8 @@ mpl3115: mpl3115@60 { compatible = "fsl,mpl3115"; reg = <0x60>; + vdd-supply = <®_3p3v>; + vddio-supply = <®_3p3v>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-cm-fx6.dts b/arch/arm/boot/dts/nxp/imx/imx6q-cm-fx6.dts index 299106fbe51c..13245af8f74d 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-cm-fx6.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-cm-fx6.dts @@ -73,7 +73,7 @@ reset-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>; }; - reg_pcie_power_on_gpio: regulator-pcie-power-on-gpio { + reg_pcie_power_on_gpio: regulator-pcie-power-on { compatible = "regulator-fixed"; regulator-name = "regulator-pcie-power-on-gpio"; regulator-min-microvolt = <3300000>; @@ -99,6 +99,34 @@ enable-active-high; }; + avdd_reg: regulator-avdd { + compatible = "regulator-fixed"; + regulator-name = "avdd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + hpvdd_reg: regulator-hpvdd { + compatible = "regulator-fixed"; + regulator-name = "hpvdd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + dcvdd_reg: regulator-dcvdd { + compatible = "regulator-fixed"; + regulator-name = "dcvdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + dbvdd_reg: regulator-dbvdd { + compatible = "regulator-fixed"; + regulator-name = "dbvdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + sound-analog { compatible = "simple-audio-card"; simple-audio-card,name = "On-board analog audio"; @@ -307,6 +335,10 @@ #sound-dai-cells = <0>; compatible = "wlf,wm8731"; reg = <0x1a>; + AVDD-supply = <&avdd_reg>; + HPVDD-supply = <&hpvdd_reg>; + DCVDD-supply = <&dcvdd_reg>; + DBVDD-supply = <&dbvdd_reg>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/nxp/imx/imx6q-dmo-edmqmx6.dts index 17fabff80e90..cbe580dec182 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-dmo-edmqmx6.dts @@ -236,9 +236,12 @@ vcc-supply = <&sw2_reg>; vio-supply = <&sw2_reg>; - stmpe_gpio1: stmpe_gpio { + stmpe_gpio1: gpio { #gpio-cells = <2>; compatible = "st,stmpe-gpio"; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; }; }; @@ -250,9 +253,12 @@ vcc-supply = <&sw2_reg>; vio-supply = <&sw2_reg>; - stmpe_gpio2: stmpe_gpio { + stmpe_gpio2: gpio { #gpio-cells = <2>; compatible = "st,stmpe-gpio"; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-evi.dts b/arch/arm/boot/dts/nxp/imx/imx6q-evi.dts index 78d941fef5df..c936180ed32a 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-evi.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-evi.dts @@ -55,6 +55,13 @@ reg = <0x10000000 0x40000000>; }; + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + reg_usbh1_vbus: regulator-usbhubreset { compatible = "regulator-fixed"; regulator-name = "usbh1_vbus"; @@ -81,6 +88,7 @@ panel { compatible = "sharp,lq101k1ly04"; + power-supply = <®_3v3>; port { panel_in: endpoint { @@ -124,7 +132,7 @@ pinctrl-0 = <&pinctrl_ecspi5 &pinctrl_ecspi5cs>; status = "okay"; - eeprom: m95m02@1 { + eeprom: eeprom@1 { compatible = "st,m95m02", "atmel,at25"; size = <262144>; pagesize = <256>; @@ -134,7 +142,7 @@ }; pb_rtc: rtc@3 { - compatible = "nxp,rtc-pcf2123"; + compatible = "nxp,pcf2123"; spi-max-frequency = <2450000>; spi-cs-high; reg = <3>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-icore-ofcap10.dts b/arch/arm/boot/dts/nxp/imx/imx6q-icore-ofcap10.dts index 02aca1e28ce3..1ad3bdcea4a3 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-icore-ofcap10.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-icore-ofcap10.dts @@ -16,6 +16,7 @@ panel { compatible = "ampire,am-1280800n3tzqw-t00h"; backlight = <&backlight_lvds>; + power-supply = <®_3p3v>; port { panel_in: endpoint { diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-icore-ofcap12.dts b/arch/arm/boot/dts/nxp/imx/imx6q-icore-ofcap12.dts index 241811c52b62..9e1c64da0b30 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-icore-ofcap12.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-icore-ofcap12.dts @@ -16,6 +16,7 @@ panel { compatible = "koe,tx31d200vm0baa"; backlight = <&backlight_lvds>; + power-supply = <®_3p3v>; port { panel_in: endpoint { diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-pistachio.dts b/arch/arm/boot/dts/nxp/imx/imx6q-pistachio.dts index 56b77cc0af2b..b8567167779c 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-pistachio.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-pistachio.dts @@ -145,6 +145,7 @@ panel { compatible = "hannstar,hsd100pxn1"; backlight = <&backlight_lvds>; + power-supply = <®_3p3v>; port { panel_in: endpoint { @@ -324,8 +325,6 @@ }; &iomuxc { - pinctrl-names = "default"; - pinctrl_hog: hoggrp { fsl,pins = < MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /*pcie power*/ diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-prti6q.dts b/arch/arm/boot/dts/nxp/imx/imx6q-prti6q.dts index fb81bd8ba035..73ed40ae5a7b 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-prti6q.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-prti6q.dts @@ -57,6 +57,7 @@ panel { compatible = "kyo,tcg121xglp"; backlight = <&backlight_lcd>; + power-supply = <®_3v3>; port { panel_in: endpoint { @@ -72,6 +73,13 @@ regulator-max-microvolt = <1800000>; }; + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + reg_wifi: regulator-wifi { compatible = "regulator-fixed"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tbs2910.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tbs2910.dts index 5353a0c24420..3bd0e2c9e57a 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-tbs2910.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-tbs2910.dts @@ -37,7 +37,7 @@ 3000 1>; }; - ir_recv { + ir-receiver { compatible = "gpio-ir-receiver"; gpios = <&gpio3 18 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-utilite-pro.dts b/arch/arm/boot/dts/nxp/imx/imx6q-utilite-pro.dts index aae81feee00d..c78f101c3cc1 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-utilite-pro.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-utilite-pro.dts @@ -326,11 +326,14 @@ &pcie { pcie@0,0 { reg = <0x000000 0 0 0 0>; + device_type = "pci"; #address-cells = <3>; #size-cells = <2>; + bus-range = <0x00 0xff>; + ranges; /* non-removable i211 ethernet card */ - eth1: intel,i211@pcie0,0 { + eth1: ethernet@0,0 { reg = <0x010000 0 0 0 0>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts b/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts index 18a620832a2a..a55644529c67 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts @@ -8,6 +8,7 @@ /dts-v1/; +#include "imx6q.dtsi" #include "imx6qdl-var-som.dtsi" #include <dt-bindings/pwm/pwm.h> diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-yapp4-pegasus.dts b/arch/arm/boot/dts/nxp/imx/imx6q-yapp4-pegasus.dts index ec6651ba4ba2..7332f2718982 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-yapp4-pegasus.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-yapp4-pegasus.dts @@ -17,6 +17,10 @@ }; }; +&beeper { + status = "okay"; +}; + &gpio_oled { status = "okay"; }; @@ -37,6 +41,10 @@ status = "okay"; }; +&pwm3 { + status = "okay"; +}; + ®_pu { regulator-always-on; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi index 419d85b5a660..8a0ce250e576 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi @@ -589,7 +589,7 @@ st,touch-det-delay = <5>; }; - stmpe_adc: stmpe_adc { + stmpe_adc: adc { compatible = "st,stmpe-adc"; /* forbid to use ADC channels 3-0 (touch) */ st,norequest-mask = <0x0F>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi index ea92b2b5c50d..e9d5bbb43145 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi @@ -462,7 +462,6 @@ regulator-ramp-delay = <7000>; regulator-boot-on; regulator-always-on; - linux,phandle = <®_vdd_arm>; }; /* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */ diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi index b518bcb6b7a9..01f77142e153 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi @@ -360,7 +360,6 @@ regulator-ramp-delay = <7000>; regulator-boot-on; regulator-always-on; - linux,phandle = <®_vdd_arm>; }; /* VDD_SOC (1+R1/R2 = 1.635) */ @@ -372,7 +371,6 @@ regulator-ramp-delay = <7000>; regulator-boot-on; regulator-always-on; - linux,phandle = <®_vdd_soc>; }; /* VDD_1P0 (1+R1/R2 = 1.38): */ diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi index 8d471450d5c5..610b2a72fe82 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi @@ -127,6 +127,7 @@ panel-lvds0 { compatible = "hannstar,hsd100pxn1"; backlight = <&backlight_lvds0>; + power-supply = <®_3p3v>; port { panel_in_lvds0: endpoint { diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi index c727aac257f9..ef0c26688446 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi @@ -135,13 +135,13 @@ i2c-parent = <&i2c2>; idle-state = <0>; - i2c2mux@1 { + i2c@1 { reg = <1>; #address-cells = <1>; #size-cells = <0>; }; - i2c2mux@2 { + i2c@2 { reg = <2>; #address-cells = <1>; #size-cells = <0>; @@ -158,7 +158,7 @@ i2c-parent = <&i2c3>; idle-state = <0>; - i2c3mux@1 { + i2c@1 { reg = <1>; #address-cells = <1>; #size-cells = <0>; @@ -237,6 +237,7 @@ panel-lcd { compatible = "okaya,rs800480t-7x0gp"; backlight = <&backlight_lcd>; + power-supply = <®_3p3v>; port { lcd_panel_in: endpoint { @@ -248,6 +249,7 @@ panel-lvds0 { compatible = "hannstar,hsd100pxn1"; backlight = <&backlight_lvds0>; + power-supply = <®_3p3v>; port { panel_in_lvds0: endpoint { @@ -259,6 +261,7 @@ panel-lvds1 { compatible = "hannstar,hsd100pxn1"; backlight = <&backlight_lvds1>; + power-supply = <®_3p3v>; port { panel_in_lvds1: endpoint { diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_som2.dtsi index 806af7f60419..03fe053880ca 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_som2.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_som2.dtsi @@ -114,6 +114,7 @@ panel-lcd { compatible = "okaya,rs800480t-7x0gp"; backlight = <&backlight_lcd>; + power-supply = <®_3p3v>; port { lcd_panel_in: endpoint { @@ -125,6 +126,7 @@ panel-lvds0 { compatible = "hannstar,hsd100pxn1"; backlight = <&backlight_lvds0>; + power-supply = <®_3p3v>; port { panel_in_lvds0: endpoint { @@ -136,6 +138,7 @@ panel-lvds1 { compatible = "hannstar,hsd100pxn1"; backlight = <&backlight_lvds1>; + power-supply = <®_3p3v>; port { panel_in_lvds1: endpoint { diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6x.dtsi index c71aa7498acf..6a353a99e13d 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6x.dtsi @@ -179,6 +179,7 @@ panel-lcd { compatible = "okaya,rs800480t-7x0gp"; backlight = <&backlight_lcd>; + power-supply = <®_3p3v>; port { lcd_panel_in: endpoint { @@ -190,6 +191,7 @@ panel-lvds0 { compatible = "hannstar,hsd100pxn1"; backlight = <&backlight_lvds>; + power-supply = <®_3p3v>; port { panel_in: endpoint { diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi index f7abc17c7c93..3b7d01065e87 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/clock/imx6qdl-clock.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/media/video-interfaces.h> / { chosen { @@ -207,6 +208,7 @@ panel-lcd { compatible = "okaya,rs800480t-7x0gp"; backlight = <&backlight_lcd>; + power-supply = <®_3p3v>; port { lcd_panel_in: endpoint { @@ -218,6 +220,7 @@ panel-lvds0 { compatible = "hannstar,hsd100pxn1"; backlight = <&backlight_lvds>; + power-supply = <®_3p3v>; port { panel_in: endpoint { @@ -360,7 +363,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ov5642>; clocks = <&clks IMX6QDL_CLK_CKO2>; - clock-names = "xclk"; reg = <0x42>; reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; powerdown-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; @@ -370,6 +372,7 @@ port { ov5642_to_ipu1_csi0_mux: endpoint { remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; + bus-type = <MEDIA_BUS_TYPE_PARALLEL>; bus-width = <8>; hsync-active = <1>; vsync-active = <1>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi index e8368c6b27ef..ba29720e3f72 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/clock/imx6qdl-clock.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/media/video-interfaces.h> / { chosen { @@ -17,6 +18,13 @@ reg = <0x10000000 0x40000000>; }; + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "reg-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + reg_usb_otg_vbus: regulator-usb-otg-vbus { compatible = "regulator-fixed"; regulator-name = "usb_otg_vbus"; @@ -139,6 +147,7 @@ panel { compatible = "hannstar,hsd100pxn1"; backlight = <&backlight_lvds>; + power-supply = <®_3v3>; port { panel_in: endpoint { @@ -278,7 +287,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ov5642>; clocks = <&clks IMX6QDL_CLK_CKO>; - clock-names = "xclk"; reg = <0x3c>; DOVDD-supply = <&vgen4_reg>; /* 1.8v */ AVDD-supply = <&vgen3_reg>; /* 2.8v, rev C board is VGEN3 @@ -291,6 +299,7 @@ port { ov5642_to_ipu1_csi0_mux: endpoint { remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; + bus-type = <MEDIA_BUS_TYPE_PARALLEL>; bus-width = <8>; hsync-active = <1>; vsync-active = <1>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi index 6ab71a729fd8..c93dbc595ef6 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi @@ -69,7 +69,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_switch>; interrupt-parent = <&gpio3>; - interrupt = <30 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <30 IRQ_TYPE_LEVEL_HIGH>; reset-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; reg = <0>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-ts4900.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-ts4900.dtsi index f88da757edda..948b612496a5 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-ts4900.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-ts4900.dtsi @@ -140,7 +140,7 @@ reg = <0x28>; #gpio-cells = <2>; gpio-controller; - ngpio = <32>; + ngpios = <32>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-mb7.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-mb7.dtsi index dd4e5bce4a55..8232f4ea2752 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-mb7.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-mb7.dtsi @@ -16,16 +16,19 @@ lcd-panel { compatible = "edt,et057090dhu"; + power-supply = <®_lcd1_pwr>; pixelclk-active = <0>; }; lvds0-panel { compatible = "edt,etml1010g0dka"; + power-supply = <®_lcd1_pwr>; pixelclk-active = <0>; }; lvds1-panel { compatible = "edt,etml1010g0dka"; + power-supply = <®_lcd1_pwr>; pixelclk-active = <0>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi index 2bff5f92242a..fef34ce961d5 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi @@ -9,9 +9,6 @@ * Copyright 2022 Bootlin */ -/dts-v1/; - -#include "imx6q.dtsi" #include <dt-bindings/clock/imx6qdl-clock.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/sound/fsl-imx-audmux.h> diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-yapp4-pegasus-plus.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-yapp4-pegasus-plus.dts index 4a961a33bf2d..770a85e0561c 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qp-yapp4-pegasus-plus.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6qp-yapp4-pegasus-plus.dts @@ -17,6 +17,10 @@ }; }; +&beeper { + status = "okay"; +}; + &gpio_oled { status = "okay"; }; @@ -37,6 +41,10 @@ status = "okay"; }; +&pwm3 { + status = "okay"; +}; + ®_pu { regulator-always-on; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-vision.dts b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-vision.dts index 2694fe18a91b..7cda1f21e418 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-vision.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-vision.dts @@ -227,7 +227,6 @@ }; &usbotg1 { - pinctrl-names = "default"; disable-over-current; srp-disable; hnp-disable; diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-vision5.dts b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-vision5.dts index a2534c422a52..f8709a952409 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-vision5.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-vision5.dts @@ -26,6 +26,11 @@ compatible = "kobo,tolino-vision5", "fsl,imx6sl"; }; +&epd_pmic_supply { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_epd_pmic_supply>; +}; + &gpio_keys { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; @@ -59,6 +64,12 @@ >; }; + pinctrl_epd_pmic_supply: epd-pmic-supplygrp { + fsl,pins = < + MX6SL_PAD_EPDC_PWRWAKEUP__GPIO2_IO14 0x40010059 + >; + }; + pinctrl_gpio_keys: gpio-keysgrp { fsl,pins = < MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25 0x17059 /* PWR_SW */ @@ -159,6 +170,14 @@ >; }; + pinctrl_sy7636_gpio: sy7636-gpiogrp { + fsl,pins = < + MX6SL_PAD_EPDC_VCOM0__GPIO2_IO03 0x40010059 /* VCOM_CTRL */ + MX6SL_PAD_EPDC_PWRCTRL1__GPIO2_IO08 0x40010059 /* EN */ + MX6SL_PAD_EPDC_PWRSTAT__GPIO2_IO13 0x17059 /* PWR_GOOD */ + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1 @@ -329,6 +348,11 @@ pinctrl-0 = <&pinctrl_ricoh_gpio>; }; +&sy7636 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sy7636_gpio>; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-librah2o.dts b/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-librah2o.dts index 660620d226f7..19bbe60331b3 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-librah2o.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-librah2o.dts @@ -36,6 +36,11 @@ soc-supply = <&dcdc1_reg>; }; +&epd_pmic_supply { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_epd_pmic_supply>; +}; + &gpio_keys { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; @@ -69,6 +74,12 @@ >; }; + pinctrl_epd_pmic_supply: epd-pmic-supplygrp { + fsl,pins = < + MX6SLL_PAD_EPDC_PWR_WAKE__GPIO2_IO14 0x40010059 + >; + }; + pinctrl_gpio_keys: gpio-keysgrp { fsl,pins = < MX6SLL_PAD_GPIO4_IO25__GPIO4_IO25 0x17059 /* PWR_SW */ @@ -169,6 +180,14 @@ >; }; + pinctrl_sy7636_gpio: sy7636-gpiogrp { + fsl,pins = < + MX6SLL_PAD_EPDC_VCOM0__GPIO2_IO03 0x40010059 /* VCOM_CTRL */ + MX6SLL_PAD_EPDC_PWR_CTRL1__GPIO2_IO08 0x40010059 /* EN */ + MX6SLL_PAD_EPDC_PWR_STAT__GPIO2_IO13 0x17059 /* PWR_GOOD */ + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1 @@ -319,6 +338,11 @@ pinctrl-0 = <&pinctrl_ricoh_gpio>; }; +&sy7636 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sy7636_gpio>; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi index c7aeb99d8f00..3e238d8118fa 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi @@ -119,7 +119,7 @@ regulator-always-on; }; - reg_pcie_gpio: regulator-pcie-gpio { + reg_pcie_gpio: regulator-pcie { compatible = "regulator-fixed"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie_reg>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi index 73c9cfbdba62..3d147b160ecf 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi @@ -43,6 +43,13 @@ regulator-max-microvolt = <2800000>; }; + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + reg_sd1_vmmc: regulator-sd1-vmmc { compatible = "regulator-fixed"; regulator-name = "VSD_3V3"; @@ -157,6 +164,7 @@ panel { compatible = "innolux,at043tn24"; backlight = <&backlight_display>; + power-supply = <®_3v3>; port { panel_in: endpoint { diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-isiot.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-isiot.dtsi index 4c09bb312696..e34c8cbe36ae 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-isiot.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-isiot.dtsi @@ -122,15 +122,21 @@ VDDD-supply = <®_1p8v>; }; - stmpe811: gpio-expander@44 { + gpio-expander@44 { compatible = "st,stmpe811"; reg = <0x44>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_stmpe>; interrupt-parent = <&gpio1>; interrupts = <18 IRQ_TYPE_EDGE_FALLING>; - interrupt-controller; - #interrupt-cells = <2>; + + gpio { + compatible = "st,stmpe-gpio"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; stmpe: touchscreen { compatible = "st,stmpe-ts"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-pico-dwarf.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-pico-dwarf.dts index fb206c1d8aca..fbab126f95b9 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-pico-dwarf.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-pico-dwarf.dts @@ -49,5 +49,7 @@ pressure-sensor@60 { compatible = "fsl,mpl3115"; reg = <0x60>; + vdd-supply = <®_3p3v>; + vddio-supply = <®_3p3v>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-pdk2.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-pdk2.dts index b29713831a74..04e570d76e42 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-pdk2.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-pdk2.dts @@ -199,7 +199,7 @@ reg = <0x38>; interrupt-parent = <&gpio5>; interrupts = <4 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */ - power-supply = <®_panel_3v3>; + vcc-supply = <®_panel_3v3>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi index 7ee25b141627..6fd68970c0b4 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi @@ -126,7 +126,7 @@ s25fl064: flash@2 { #address-cells = <1>; #size-cells = <1>; - compatible = " jedec,spi-nor"; + compatible = "jedec,spi-nor"; reg = <2>; spi-max-frequency = <40000000>; m25p,fast-read; diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-nitrogen7.dts b/arch/arm/boot/dts/nxp/imx/imx7d-nitrogen7.dts index 7acd28658e6f..2192f105ec81 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7d-nitrogen7.dts +++ b/arch/arm/boot/dts/nxp/imx/imx7d-nitrogen7.dts @@ -35,6 +35,7 @@ panel-lcd { compatible = "okaya,rs800480t-7x0gp"; backlight = <&backlight_lcd>; + power-supply = <®_3v3>; port { panel_in: endpoint { @@ -61,6 +62,13 @@ enable-active-high; }; + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "reg-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + reg_can2_3v3: regulator-can2-3v3 { compatible = "regulator-fixed"; regulator-name = "can2-3v3"; diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts b/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts index 1b965652291b..347dd0fe4f82 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts +++ b/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts @@ -49,6 +49,8 @@ pressure-sensor@60 { compatible = "fsl,mpl3115"; reg = <0x60>; + vdd-supply = <®_3p3v>; + vddio-supply = <®_3p3v>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts b/arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts index 17236f90ab33..a370e868cafe 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts +++ b/arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts @@ -406,6 +406,8 @@ mpl3115@60 { compatible = "fsl,mpl3115"; reg = <0x60>; + vdd-supply = <®_audio_3v3>; + vddio-supply = <®_audio_3v3>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts b/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts index 56dedd4fb8f0..92b6258059ee 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts +++ b/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts @@ -31,6 +31,13 @@ }; }; + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + reg_peri_3p15v: regulator-peri-3p15v { compatible = "regulator-fixed"; regulator-name = "peri_3p15v_reg"; @@ -228,6 +235,8 @@ mpl3115@60 { compatible = "fsl,mpl3115"; reg = <0x60>; + vdd-supply = <®_3v3>; + vddio-supply = <®_3v3>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx7ulp-evk.dts b/arch/arm/boot/dts/nxp/imx/imx7ulp-evk.dts index eff51e113db4..88d7dc005fa0 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7ulp-evk.dts +++ b/arch/arm/boot/dts/nxp/imx/imx7ulp-evk.dts @@ -92,7 +92,6 @@ IMX7ULP_PAD_PTC3__LPUART4_RX 0x3 IMX7ULP_PAD_PTC2__LPUART4_TX 0x3 >; - bias-pull-up; }; pinctrl_pwm0: pwm0grp { diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dts b/arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dts index af59211842fb..ddb64f3d0471 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dts +++ b/arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dts @@ -112,6 +112,29 @@ enable-active-high; regulator-always-on; }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "imx28-mrmmi-tlv320aic3x-audio"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&cpu_dai>; + simple-audio-card,frame-master = <&cpu_dai>; + simple-audio-card,widgets = + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "Headphone Jack", "HPROUT", + "Headphone Jack", "HPRCOM"; + simple-audio-card,mclk-fs = <512>; + + cpu_dai: simple-audio-card,cpu { + sound-dai = <&saif0>; + clocks = <&saif0>; + }; + + codec_dai: simple-audio-card,codec { + sound-dai = <&tlv320aic3x>; + }; + }; }; &auart0 { @@ -154,6 +177,19 @@ pinctrl-0 = <&i2c0_pins_a>; status = "okay"; + tlv320aic3x: audio-codec@18 { + compatible = "ti,tlv320aic3x"; + pinctrl-names = "default"; + pinctrl-0 = <&tlv320aic3x_pins>; + reg = <0x18>; + reset-gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + DVDD-supply = <®_1v8>; + IOVDD-supply = <®_3v3>; + AVDD-supply = <®_3v3>; + DRVDD-supply = <®_3v3>; + }; + touchscreen: touchscreen@38 { compatible = "edt,edt-ft5306"; reg = <0x38>; @@ -246,6 +282,14 @@ fsl,voltage = <MXS_VOLTAGE_HIGH>; }; + tlv320aic3x_pins: tlv320aic3x-pins@0 { + reg = <0>; + fsl,pinmux-ids = <MX28_PAD_SSP0_DATA4__GPIO_2_4>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,pull-up = <MXS_PULL_ENABLE>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + }; + usb0_vbus_enable_pin: usb0-vbus-enable@0 { reg = <0>; fsl,pinmux-ids = <MX28_PAD_SSP0_DATA5__GPIO_2_5>; @@ -269,6 +313,12 @@ status = "okay"; }; +&saif0 { + pinctrl-names = "default"; + pinctrl-0 = <&saif0_pins_a>; + status = "okay"; +}; + /* microSD */ &ssp0 { compatible = "fsl,imx28-mmc"; |