summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/mediatek/mt76/mt76x2
AgeCommit message (Collapse)Author
2025-05-21wifi: mt76: mt76x2: Add support for LiteOn WN4516R,WN4519RHenk Vergonet
Adds support for: - LiteOn WN4516R - LiteOn WN4519R Both use: - A nonstandard USB connector - Mediatek chipset MT7600U - ASIC revision: 76320044 Disabled VHT support on ASIC revision 76320044: This fixes the 5G connectibity issue on LiteOn WN4519R module see https://github.com/openwrt/mt76/issues/971 And may also fix the 5G issues on the XBox One Wireless Adapter see https://github.com/openwrt/mt76/issues/200 I have looked at the FCC info related to the MT7632U chip as mentioned in here: https://github.com/openwrt/mt76/issues/459 These confirm the chipset does not support 'ac' mode and hence VHT should be turned of. Signed-off-by: Henk Vergonet <henk.vergonet@gmail.com> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20250418143914.31384-1-henk.vergonet@gmail.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-03-19wifi: mt76: mt76x2u: add TP-Link TL-WDN6200 ID to device tableIcenowy Zheng
The TP-Link TL-WDN6200 "Driverless" version cards use a MT7612U chipset. Add the USB ID to mt76x2u driver. Signed-off-by: Icenowy Zheng <uwu@icenowy.me> Link: https://patch.msgid.link/20250317102235.1421726-1-uwu@icenowy.me Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-03-19wifi: mt76: only mark tx-status-failed frames as ACKed on mt76x0/2Felix Fietkau
The interrupt status polling is unreliable, which can cause status events to get lost. On all newer chips, txs-timeout is an indication that the packet was either never sent, or never acked. Fixes issues with inactivity polling. Link: https://patch.msgid.link/20250311103646.43346-6-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-27wifi: mt76: move napi_enable() from under BHJakub Kicinski
mt76 does a lot of: local_bh_disable(); napi_enable(...napi); napi_schedule(...napi); local_bh_enable(); local_bh_disable() is not a real lock, its most likely taken because napi_schedule() requires that we invoke softirqs at some point. napi_enable() needs to take a mutex, so move it from under the BH protection. Fixes: 413f0271f396 ("net: protect NAPI enablement with netdev_lock()") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/dcfd56bc-de32-4b11-9e19-d8bd1543745d@stanley.mountain Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250124031841.1179756-8-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-14wifi: mt76: remove dev->wcid_phy_maskFelix Fietkau
Explicitly check wcid->phy_idx instead. Reduces allocated data size. Link: https://patch.msgid.link/20250102163508.52945-8-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-10-02move asm/unaligned.h to linux/unaligned.hAl Viro
asm/unaligned.h is always an include of asm-generic/unaligned.h; might as well move that thing to linux/unaligned.h and include that - there's nothing arch-specific in that header. auto-generated by the following: for i in `git grep -l -w asm/unaligned.h`; do sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i done for i in `git grep -l -w asm-generic/unaligned.h`; do sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i done git mv include/asm-generic/unaligned.h include/linux/unaligned.h git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
2024-09-06wifi: mt76: partially move channel change code to coreFelix Fietkau
This allows the core code to change the channel. Code deduplication and preparation for adding scanning code to the core. Link: https://patch.msgid.link/20240828063422.44813-1-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-06-26wifi: mac80211: inform the low level if drv_stop() is a suspendEmmanuel Grumbach
This will allow the low level driver to take different actions for different flows. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240618192529.739036208b6e.Ie18a2fe8e02bf2717549d39420b350cfdaf3d317@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-22wifi: mt76: mt76x2u: add netgear wdna3100v3 to device tableDacio Romero
Netgear WDNA3100v3 has a chipset that's compatible with the mt76x2u driver and works without modification with the mainline kernel by writing to sysfs. Signed-off-by: Dacio Romero <dacioromero@gmail.com> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-08wifi: mac80211: simplify non-chanctx driversJohannes Berg
There are still surprisingly many non-chanctx drivers, but in mac80211 that code is a bit awkward. Simplify this by having those drivers assign 'emulated' ops, so that the mac80211 code can be more unified between non-chanctx/chanctx drivers. This cuts the number of places caring about it by about 15, which are scattered across - now they're fewer and no longer in the channel context handling. Link: https://msgid.link/20240129194108.6d0ead50f5cf.I60d093b2fc81ca1853925a4d0ac3a2337d5baa5b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-01-31wifi: fill in MODULE_DESCRIPTION()s for mt76 driversBreno Leitao
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the MediaTek mt76 drivers. Here is a sorted list of descriptions. It might make the reviewing process easier. MODULE_DESCRIPTION("MediaTek MT7603E and MT76x8 wireless driver"); MODULE_DESCRIPTION("MediaTek MT7615E and MT7663E wireless driver"); MODULE_DESCRIPTION("MediaTek MT7615E MMIO helpers"); MODULE_DESCRIPTION("MediaTek MT7663 SDIO/USB helpers"); MODULE_DESCRIPTION("MediaTek MT7663S (SDIO) wireless driver"); MODULE_DESCRIPTION("MediaTek MT7663U (USB) wireless driver"); MODULE_DESCRIPTION("MediaTek MT76x02 helpers"); MODULE_DESCRIPTION("MediaTek MT76x02 MCU helpers"); MODULE_DESCRIPTION("MediaTek MT76x0E (PCIe) wireless driver"); MODULE_DESCRIPTION("MediaTek MT76x0U (USB) wireless driver"); MODULE_DESCRIPTION("MediaTek MT76x2 EEPROM helpers"); MODULE_DESCRIPTION("MediaTek MT76x2E (PCIe) wireless driver"); MODULE_DESCRIPTION("MediaTek MT76x2U (USB) wireless driver"); MODULE_DESCRIPTION("MediaTek MT76x connac layer helpers"); MODULE_DESCRIPTION("MediaTek MT76x EEPROM helpers"); MODULE_DESCRIPTION("MediaTek MT76x helpers"); MODULE_DESCRIPTION("MediaTek MT76x SDIO helpers"); MODULE_DESCRIPTION("MediaTek MT76x USB helpers"); MODULE_DESCRIPTION("MediaTek MT7915E MMIO helpers"); MODULE_DESCRIPTION("MediaTek MT7921 core driver"); MODULE_DESCRIPTION("MediaTek MT7921E (PCIe) wireless driver"); MODULE_DESCRIPTION("MediaTek MT7921S (SDIO) wireless driver"); MODULE_DESCRIPTION("MediaTek MT7921U (USB) wireless driver"); MODULE_DESCRIPTION("MediaTek MT7925 core driver"); MODULE_DESCRIPTION("MediaTek MT7925E (PCIe) wireless driver"); MODULE_DESCRIPTION("MediaTek MT7925U (USB) wireless driver"); MODULE_DESCRIPTION("MediaTek MT792x core driver"); MODULE_DESCRIPTION("MediaTek MT792x USB helpers"); MODULE_DESCRIPTION("MediaTek MT7996 MMIO helpers"); Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240130104243.3025393-10-leitao@debian.org
2023-09-22wifi: mt76: mt76x02: fix MT76x0 external LNA gain handlingFelix Fietkau
On MT76x0, LNA gain should be applied for both external and internal LNA. On MT76x2, LNA gain should be treated as 0 for external LNA. Move the LNA type based logic to mt76x2 in order to fix mt76x0. Fixes: 2daa67588f34 ("mt76x0: unify lna_gain parsing") Reported-by: Shiji Yang <yangshiji66@outlook.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230919194747.31647-1-nbd@nbd.name
2023-08-25Fix nomenclature for USB and PCI wireless devicesAlan Stern
A mouse that uses a USB connection is called a "USB mouse" device (or "USB mouse" for short), not a "mouse USB" device. By analogy, a WiFi adapter that connects to the host computer via USB is a "USB wireless" device, not a "wireless USB" device. (The latter term more properly refers to a defunct Wireless USB specification, which described a technology for sending USB protocol messages over an ultra wideband radio link.) Similarly for a WiFi adapter card that plugs into a PCIe slot: It is a "PCIe wireless" device, not a "wireless PCIe" device. Rephrase the text in the kernel source where the word ordering is wrong. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/57da7c80-0e48-41b5-8427-884a02648f55@rowland.harvard.edu
2022-12-01wifi: mt76: mt76x02: simplify struct mt76x02_rate_powerFelix Fietkau
- remove stbc, because mt76x0 doesn't support it and mt76x2 uses the same values as HT/VHT - reduce vht array to 2 elements, because VHT MCS0-7 are the same as HT Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: move mt76_rate_power from core to mt76x02 driver codeFelix Fietkau
Its layout and code is mt76x02 specific Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-04-10mt76: Fix undefined behavior due to shift overflowing the constantBorislav Petkov
Fix: drivers/net/wireless/mediatek/mt76/mt76x2/pci.c: In function ‘mt76x2e_probe’: ././include/linux/compiler_types.h:352:38: error: call to ‘__compiletime_assert_946’ \ declared with attribute error: FIELD_PREP: mask is not constant _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory details as to why it triggers with older gccs only. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Felix Fietkau <nbd@nbd.name> Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Cc: Ryder Lee <ryder.lee@mediatek.com> Cc: Shayne Chen <shayne.chen@mediatek.com> Cc: Sean Wang <sean.wang@mediatek.com> Cc: Kalle Valo <kvalo@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220405151517.29753-9-bp@alien8.de
2022-03-16mt76: usb: introduce __mt76u_init utility routineLorenzo Bianconi
Introduce __mt76u_init unitility routine and move mt7615 usb bus ops into mt7615 module in order to allow specifying driver specific parameter. This is a preliminary patch to add usb support to mt7921 driver. Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: mt76x02: introduce SAR supportLorenzo Bianconi
Add SAR spec support to mt76x02 driver to allow configuring SAR power limitations on the frequency ranges from the userland. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: disable BH around napi_schedule() callsFelix Fietkau
napi_schedule() can call __raise_softirq_irqoff(), which can perform softirq handling, so it must not be called in a pure process context with BH enabled. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: switch from 'pci_' to 'dma_' APIChristophe JAILLET
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below. It has been compile tested. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-11mt76: use PCI_VENDOR_ID_MEDIATEK to avoid open codedRyder Lee
Use PCI standard defines. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-26mt76: move chainmask in mt76_phyLorenzo Bianconi
Move chainmask from driver phy to mt76_phy since it is used by all drivers. This is a preliminary patch to create a common mcu library used by mt7615 and mt7921 drivers Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-26mt76: move mac_work in mt76_core moduleLorenzo Bianconi
Move mac_work delayed_work and mac_work_count in mt76_phy since it is used by all drivers. This is a preliminary patch to create a common mcu library used by mt7615 and mt7921 drivers Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: move hw mac_addr in mt76_phyLorenzo Bianconi
This is a preliminary patch to properly support mt7915 dbdc Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt76u: rely on woker APIs for rx workLorenzo Bianconi
In order to improve parallelism, convert rx path in mt76-usb module to mt76 workers APIs Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: fix memory leak if device probing failsLorenzo Bianconi
Run mt76_free_device instead of ieee80211_free_hw if device probing fails in order to remove the already allocated mt76 workqueue Fixes: a86f1d01f5ce5 ("mt76: move mt76 workqueue in common code") Fixes: f1d962369d568 ("mt76: mt7915: implement HE per-rate tx power support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: implement .mcu_parse_response in struct mt76_mcu_opsFelix Fietkau
Do not free skb inside that function Preparation for further cleanup Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: rename __mt76_mcu_send_msg to mt76_mcu_send_msgFelix Fietkau
Preparation for further cleanup Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: convert from tx tasklet to tx worker threadFelix Fietkau
This improves performance by allowing the scheduler to move the tx scheduling work to idle CPUs. Since tx scheduling work is very latency sensitive and kept short via AQL, sched_set_fifo_low is used to keep worker priority above normal tasks Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: set interrupt mask register to 0 before requesting irqFelix Fietkau
Avoids spurious interrupts in case the hardware was running already Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: move mt76 workqueue in common codeLorenzo Bianconi
Move mt76 workqueue from usb to common code in order to be reused adding low-power support for mt7663 chipset Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: mt76x2u: enable HC-M7662BU1Lorenzo Bianconi
Enable support for HC-M7662BU1 module on mt76x2u driver Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: mt76x2: fix pci suspend/resume on mt7612eLorenzo Bianconi
Fix the following mt7612e hw hangs during suspend/resume reported on Dell Vostro 3360 mt76x2e 0000:01:00.0: MCU message 2 (seq 11) timed out mt76x2e 0000:01:00.0: MCU message 30 (seq 12) timed out mt76x2e 0000:01:00.0: MCU message 30 (seq 13) timed out mt76x2e 0000:01:00.0: Firmware Version: 0.0.00 mt76x2e 0000:01:00.0: Build: 1 mt76x2e 0000:01:00.0: Build Time: 201507311614____ mt76x2e 0000:01:00.0: Firmware running! ieee80211 phy0: Hardware restart was requested mt76x2e 0000:01:00.0: MCU message 2 (seq 1) timed out mt76x2e 0000:01:00.0: MCU message 30 (seq 2) timed out mt76x2e 0000:01:00.0: MCU message 30 (seq 3) timed out mt76x2e 0000:01:00.0: Firmware Version: 0.0.00 mt76x2e 0000:01:00.0: Build: 1 mt76x2e 0000:01:00.0: Build Time: 201507311614____ mt76x2e 0000:01:00.0: Firmware running! ieee80211 phy0: Hardware restart was requested mt76x2e 0000:01:00.0: MCU message 31 (seq 5) timed out mt76x2e 0000:01:00.0: MCU message 31 (seq 6) timed out mt76x2e 0000:01:00.0: MCU message 31 (seq 7) timed out mt76x2e 0000:01:00.0: MCU message 31 (seq 8) timed out mt76x2e 0000:01:00.0: MCU message 31 (seq 9) timed out mt76x2e 0000:01:00.0: MCU message 31 (seq 10) timed out mt76x2e 0000:01:00.0: MCU message 31 (seq 11) timed out mt76x2e 0000:01:00.0: Firmware Version: 0.0.00 mt76x2e 0000:01:00.0: Build: 1 mt76x2e 0000:01:00.0: Build Time: 201507311614____ mt76x2e 0000:01:00.0: Firmware running! ieee80211 phy0: Hardware restart was requested ------------[ cut here ]----------- CPU: 3 PID: 11956 Comm: kworker/3:1 Not tainted 5.7.0-pf2 #1 Hardware name: Dell Inc. Vostro 3360/0F5DWF, BIOS A18 09/25/2013 Workqueue: events_freezable ieee80211_restart_work [mac80211] RIP: 0010:ieee80211_reconfig+0x234/0x1700 [mac80211] RSP: 0018:ffffb803c23ffdf0 EFLAGS: 00010286 RAX: 00000000fffffff0 RBX: ffff9595a7564900 RCX: 0000000000000008 RDX: 0000000000000000 RSI: 0000000000000100 RDI: 0000000000000100 RBP: ffff9595a7ec07e0 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: ffff9595a7ec18d0 R13: 00000000ffffffff R14: 0000000000000000 R15: 00000000fffffff0 FS: 0000000000000000(0000) GS:ffff9595af2c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055e56d7de000 CR3: 000000042200a001 CR4: 00000000001706e0 Call Trace: ieee80211_restart_work+0xb7/0xe0 [mac80211] process_one_work+0x1d4/0x3c0 worker_thread+0x228/0x470 ? process_one_work+0x3c0/0x3c0 kthread+0x19c/0x1c0 ? __kthread_init_worker+0x30/0x30 ret_from_fork+0x35/0x40 wlp1s0: Failed check-sdata-in-driver check, flags: 0x0 CPU: 3 PID: 11956 Comm: kworker/3:1 Tainted: G W 5.7.0-pf2 #1 Hardware name: Dell Inc. Vostro 3360/0F5DWF, BIOS A18 09/25/2013 Workqueue: events_freezable ieee80211_restart_work [mac80211] RIP: 0010:drv_remove_interface+0x11f/0x130 [mac80211] RSP: 0018:ffffb803c23ffc80 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff9595a7564900 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000082 RDI: 00000000ffffffff RBP: ffff9595a7ec1930 R08: 00000000000004b6 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000006f08 R12: ffff9595a7ec1000 R13: ffff9595a75654b8 R14: ffff9595a7ec0ca0 R15: ffff9595a7ec07e0 FS: 0000000000000000(0000) GS:ffff9595af2c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055e56d7de000 CR3: 000000042200a001 CR4: 00000000001706e0 Call Trace: ieee80211_do_stop+0x5af/0x8c0 [mac80211] ieee80211_stop+0x16/0x20 [mac80211] __dev_close_many+0xaa/0x120 dev_close_many+0xa1/0x2b0 dev_close+0x6d/0x90 cfg80211_shutdown_all_interfaces+0x71/0xd0 [cfg80211] ieee80211_reconfig+0xa2/0x1700 [mac80211] ieee80211_restart_work+0xb7/0xe0 [mac80211] process_one_work+0x1d4/0x3c0 worker_thread+0x228/0x470 ? process_one_work+0x3c0/0x3c0 kthread+0x19c/0x1c0 ? __kthread_init_worker+0x30/0x30 ret_from_fork+0x35/0x40 Fixes: 7bc04215a66b ("mt76: add driver code for MT76x2e") Tested-by: Oleksandr Natalenko <oleksandr@redhat.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: mt76x2e: rename routines in pci.cLorenzo Bianconi
Rely on mt76x2e prefix in mt76x2/pci.c and align to the rest of mt76 code Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: set runtime stream caps by mt76_phyRyder Lee
This patch can support concurrent dual-band operation. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt76x2: disable merge of OTP ROM data by defaultFelix Fietkau
The reference driver does not seem to enable it by default, only under certain conditions, e.g. when a .bin file is loaded. Make it opt-in via a device tree property for now, in case it is needed on some boards. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt76x2u: introduce Mercury UD13 supportLorenzo Bianconi
Introduce Mercury UD13 dual-band dongle support to mt76x2u driver Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt76x02u: Add support for newer versions of the XBox One wifi adapterMatthew Garrett
The current version has a new USB ID and reports as an 0x7632 device. Adding the IDs results in it working out of the box. Signed-off-by: Matthew Garrett <mjg59@google.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt76x02: fix handling MCU timeouts during hw restartFelix Fietkau
If a MCU timeout occurs before a hw restart completes, another hw restart is scheduled, and the station state gets corrupted. To speed up dealing with that, do not issue any MCU commands after the first timeout, and defer handling timeouts until the reset has completed. Also ignore errors in MCU commands during start/config to avoid making user space fail on this condition. If it happens, another restart is scheduled quickly, and that usually recovers the hardware properly. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: mt76x2: avoid starting the MAC too earlyFelix Fietkau
Do not set the tx/rx start bits in MT_MAC_SYS_CTRL from within initvals. The driver sets these later when the hardware is ready Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: avoid extra RCU synchronization on station removalFelix Fietkau
Use sta_pre_rcu_remove callback to clear wcid pointer earlier Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: mt76u: add {read/write}_extended utility routinesLorenzo Bianconi
Introduce extended utility routines to read/write data o usb bus. New devices (e.g. mt7663u) will rely on both upper and lower part of the register address. Add ext parameter to mt76u_init signature in order to reuse the code adding mt7663u support. Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: mt76u: move mcu buffer allocation in mt76x02u driversLorenzo Bianconi
Move mcu buffer allocation in mt76x2u/mt76x0u drivers since newer chipsets (e.g. mt7663u) does not rely on synchronous mcu communication Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: mt76x02u: avoid overwrite max_tx_fragmentsLorenzo Bianconi
Starting from 'commit ee8040139ab1 ("mt76: do not overwrite max_tx_fragments if it has been set")' we can avoid overwriting max_tx_fragments for mt76x02u devices Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: mt76x2: get rid of leftover targetLorenzo Bianconi
Remove tracing leftover target in mt76x2 Makefile Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: add multiple wiphy support to mt76_get_min_avg_rssiFelix Fietkau
Allow tracking clients of both wiphys separately Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: move txpower and antenna mask to struct mt76_phyFelix Fietkau
Adds multiple wiphy support to mt76_get_txpower Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: move txpower_conf back to driver specific structsFelix Fietkau
Nothing in the core uses it Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: move chainmask back to driver specific structsFelix Fietkau
Nothing in the core uses it Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: move state from struct mt76_dev to mt76_phyFelix Fietkau
Allows keeping per-wiphy state separate Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit (git 2.34.1) at 2025-07-15 11:36:26 +0000