summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/trx.c
AgeCommit message (Collapse)Author
2023-10-19wifi: rtlwifi: drop pre_fill_tx_bd_desc() from HAL interfaceDmitry Antipov
Since 'pre_fill_tx_bd_desc()' is actually used for rtl8192ee only, there is no need to maintain function pointer in 'struct rtl_hal_ops', and 'rtl92ee_pre_fill_tx_bd_desc()' may be converted to static. Compile tested only. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231016135925.129223-1-dmantipov@yandex.ru
2023-10-14wifi: rtlwifi: simplify TX command fill callbacksDmitry Antipov
Since 'rtlpriv->cfg->ops->fill_tx_cmddesc()' is always called with 'firstseg' and 'lastseg' set to 1 (and the latter is never actually used), all of the relevant chip-specific routines may be simplified. Compile tested only. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231011154442.52457-2-dmantipov@yandex.ru
2022-11-04wifi: rtlwifi: rtl8192ee: remove static variable stop_report_cntColin Ian King
Variable stop_report_cnt is being set or incremented but is never being used for anything meaningful. The variable and code relating to it's use is redundant and can be removed. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221031155637.871164-1-colin.i.king@gmail.com
2022-04-12rtlwifi: Fix spelling mistake "cacluated" -> "calculated"Lv Ruyi
There are some spelling mistakes in the comments. Fix it. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220408095803.2495336-1-lv.ruyi@zte.com.cn
2022-04-11mac80211: prepare sta handling for MLO supportSriram R
Currently in mac80211 each STA object is represented using sta_info datastructure with the associated STA specific information and drivers access ieee80211_sta part of it. With MLO (Multi Link Operation) support being added in 802.11be standard, though the association is logically with a single Multi Link capable STA, at the physical level communication can happen via different advertised links (uniquely identified by Channel, operating class, BSSID) and hence the need to handle multiple link STA parameters within a composite sta_info object called the MLD STA. The different link STA part of MLD STA are identified using the link address which can be same or different as the MLD STA address and unique link id based on the link vif. To support extension of such a model, the sta_info datastructure is modified to hold multiple link STA objects with link specific params currently within sta_info moved to this new structure. Similarly this is done for ieee80211_sta as well which will be accessed within mac80211 as well as by drivers, hence trivial driver changes are expected to support this. For current non MLO supported drivers, only one link STA is present and link information is accessed via 'deflink' member. For MLO drivers, we still need to define the APIs etc. to get the correct link ID and access the correct part of the station info. Currently in mac80211, all link STA info are accessed directly via deflink. These will be updated to access via link pointers indexed by link id with MLO support patches, with link id being 0 for non MLO supported cases. Except for couple of macro related changes, below spatch takes care of updating mac80211 and driver code to access to the link STA info via deflink. @ieee80211_sta@ struct ieee80211_sta *s; struct sta_info *si; identifier var = {supp_rates, ht_cap, vht_cap, he_cap, he_6ghz_capa, eht_cap, rx_nss, bandwidth, txpwr}; @@ ( s-> - var + deflink.var | si->sta. - var + deflink.var ) @sta_info@ struct sta_info *si; identifier var = {gtk, pcpu_rx_stats, rx_stats, rx_stats_avg, status_stats, tx_stats, cur_max_bandwidth}; @@ ( si-> - var + deflink.var ) Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Link: https://lore.kernel.org/r/1649086883-13246-1-git-send-email-quic_srirrama@quicinc.com [remove MLO-drivers notes from commit message, not clear yet; run spatch] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-09rtlwifi: switch from 'pci_' to 'dma_' APIChristophe JAILLET
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. The only file where some GFP_ flags are updated is 'pci.c'. When memory is allocated in '_rtl_pci_init_tx_ring()' and '_rtl_pci_init_rx_ring()' GFP_KERNEL can be used because both functions are called from a probe function and no spinlock is taken. The call chain is: rtl_pci_probe --> rtl_pci_init --> _rtl_pci_init_trx_ring --> _rtl_pci_init_rx_ring --> _rtl_pci_init_tx_ring @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200907193828.318233-1-christophe.jaillet@wanadoo.fr
2020-08-31rtlwifi: rtl8192ee: Rename RT_TRACE to rtl_dbgLarry Finger
Change the misleading macro name to one that is more descriptive for rtl8192ee. Changes suggested by ckeckpatch.pl have been made. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200723204244.24457-10-Larry.Finger@lwfinger.net
2019-10-09rtlwifi: rtl8192ee: Remove set but not used variable 'cur_tx_wp'zhengbin
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/realtek/rtlwifi/rtl8192ee/trx.c: In function rtl92ee_is_tx_desc_closed: drivers/net/wireless/realtek/rtlwifi/rtl8192ee/trx.c:1005:18: warning: variable cur_tx_wp set but not used [-Wunused-but-set-variable] It is not used since commit cf54622c8076 ("rtlwifi: cleanup the code that check whether TX ring is available") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-02rtlwifi: rtl8192ee: Remove set but not used variables 'short_gi','buf_len'zhengbin
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/realtek/rtlwifi/rtl8192ee/trx.c: In function rtl92ee_tx_fill_desc: drivers/net/wireless/realtek/rtlwifi/rtl8192ee/trx.c:656:5: warning: variable short_gi set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/rtl8192ee/trx.c: In function rtl92ee_tx_fill_desc: drivers/net/wireless/realtek/rtlwifi/rtl8192ee/trx.c:648:15: warning: variable buf_len set but not used [-Wunused-but-set-variable] They are not used since commit f1d2b4d338bf ("rtlwifi: rtl818x: Move drivers into new realtek directory") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-03rtlwifi: rtl8192ee: Remove some variable initializationsLarry Finger
A number of variables are initialized when declared that set later in the routine, thus the initialization can be removed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-03rtlwifi: rtl8192ee: Convert inline routines to little-endian wordsLarry Finger
In this step, the read/write routines for the descriptors are converted to use __le32 quantities, thus a lot of casts can be removed. Callback routines still use the 8-bit arrays, but these are changed within the specified routine. The macro that cleared a descriptor has now been converted into an inline routine. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-03rtlwifi: rtl8192ee: Convert macros that set descriptorLarry Finger
As a first step in the conversion, the macros that set the RX and TX descriptors are converted to static inline routines, and the names are changed from upper to lower case. To minimize the changes in a given step, the input descriptor information is left as as a byte array (u8 *), even though it should be a little-endian word array (__le32 *). That will be changed in the next patch. Several places where checkpatch.pl reports lines too long are fixed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-04-13rtlwifi: Convert the wake_match variable to localLarry Finger
In five of the drivers, the contents of bits 29-31 of one of the RX descriptors is used to set bits in a variable that is used to save the wakeup condition for output in a debugging statement. The resulting variable is not used anywhere else even though it is stored in a struct and could be available in other routines. This variable is changed to be local. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-04-13rtlwifi: Fix duplicate tests of one of the RX descriptorsLarry Finger
In drivers rtl8188ee, rtl8821ae, rtl8723be, and rtl8192ee, the reason for a wake-up is returned in the fourth RX descriptor in bits 29-31. Due to typographical errors, all but rtl8821ae test bit 31 twice and fail to test bit 29. This error causes no problems as the tests are only used to set bits in the output of an optional debugging statement. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-19rtlwifi: Remove CamelCase variables from base codeLarry Finger
There are a number of CamelCase variables remaining in the source files of modules rtl_pci, rtl_usb, and rtlwifi. The following checkpatch excettions are also fixed: for_kalle1/0001-rtlwifi-Remove-CamelCase-variables-from-base-code.patch ----------------------------------------------------------------------- CHECK: Unnecessary parentheses around 'rtlefuse->efuse_map[EFUSE_INIT_MAP][base + i] != rtlefuse->efuse_map[EFUSE_MODIFY_MAP][base + i]' #68: FILE: drivers/net/wireless/realtek/rtlwifi/efuse.c:377: + if ((rtlefuse->efuse_map[EFUSE_INIT_MAP][base + i] != + rtlefuse->efuse_map[EFUSE_MODIFY_MAP][base + i]) || + (rtlefuse->efuse_map[EFUSE_INIT_MAP][base + i + 1] != + rtlefuse->efuse_map[EFUSE_MODIFY_MAP][base + i + 1])) { CHECK: Unnecessary parentheses around 'rtlefuse->efuse_map[EFUSE_INIT_MAP][base + i + 1] != rtlefuse->efuse_map[EFUSE_MODIFY_MAP][base + i + 1]' #68: FILE: drivers/net/wireless/realtek/rtlwifi/efuse.c:377: + if ((rtlefuse->efuse_map[EFUSE_INIT_MAP][base + i] != + rtlefuse->efuse_map[EFUSE_MODIFY_MAP][base + i]) || + (rtlefuse->efuse_map[EFUSE_INIT_MAP][base + i + 1] != + rtlefuse->efuse_map[EFUSE_MODIFY_MAP][base + i + 1])) { WARNING: line over 80 characters #70: FILE: drivers/net/wireless/realtek/rtlwifi/efuse.c:379: + (rtlefuse->efuse_map[EFUSE_INIT_MAP][base + i + 1] != CHECK: No space is necessary after a cast #186: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8188ee/trx.c:396: + status->rx_is40mhzpacket = (bool) GET_RX_DESC_BW(pdesc); CHECK: No space is necessary after a cast #208: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8192ce/trx.c:335: + stats->rx_is40mhzpacket = (bool) GET_RX_DESC_BW(pdesc); CHECK: No space is necessary after a cast #243: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c:301: + stats->rx_is40mhzpacket = (bool) GET_RX_DESC_BW(pdesc); CHECK: No space is necessary after a cast #252: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c:368: + stats.rx_is40mhzpacket = (bool) GET_RX_DESC_BW(rxdesc); CHECK: No space is necessary after a cast #265: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8192de/trx.c:475: + stats->rx_is40mhzpacket = (bool) GET_RX_DESC_BW(pdesc); WARNING: Unnecessary space before function pointer arguments #455: FILE: drivers/net/wireless/realtek/rtlwifi/wifi.h:1462: + void (*writen_sync) (struct rtl_priv *rtlpriv, u32 addr, void *buf, WARNING: Unnecessary space before function pointer arguments #483: FILE: drivers/net/wireless/realtek/rtlwifi/wifi.h:2257: + void (*fill_fake_txdesc) (struct ieee80211_hw *hw, u8 *pdesc, Note that not all checkpatch exceptions are addressed. Those will be handled in later patches. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-19rtlwifi: rtl8192ee: Replace old-style license informationLarry Finger
The traditional license information is replaced by the SPDX form. There are no code changes. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-29rtlwifi: remove hal_op rx_command_packetPing-Ke Shih
Because the hal_op rx_command_packet does C2H handler if rx packet type is C2H, and the handler have been moved to base.c so we can call the handler directly. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-29rtlwifi: remove duplicate C2H handlerPing-Ke Shih
Merge duplicate C2H handler and implement the handler in base.c. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-29rtlwifi: support accurate nullfunc frame tx ack reportTzu-En Huang
In order to realize the keep-alive mechanism in mac80211 stack, reporting accurate tx ack status for nullfunc frame is added in this commit. If current frame is nullfunc frame, we ask firmware to report by filling TX report bit in TX descriptor. After this frame DMA done, TX interrupt is triggered but TX status is unknown at this moment, so enqueue this skb into tx_report->queue. Finally, C2H report will be received if the frame is transmitted successfully or retried over, and then we report to mac80211 with IEEE80211_TX_STAT_ACK flag only if it's successful. Otherwise, if failure or timeout (one second), we report to mac80211 without this flag. Signed-off-by: Tzu-En Huang <tehuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-07rtlwifi: cleanup the code that check whether TX ring is availablePing-Ke Shih
Remove the duplicate checking of TX ring's available number, and remove the variable to store available number that can be calculated by read/write pointers. Signed-off-by: Steven Ting <steventing@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-07rtlwifi: fix the wrong size to calculate fifo spacePing-Ke Shih
Give correct fifo size to calculate fifo space. Fortunately, the values of RTL_PCI_MAX_RX_COUNT and TX_DESC_NUM_92E are the same in old code, so it still works. Signed-off-by: Steven Ting <steventing@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-13rtlwifi: rtl8192ee: Make driver support 64bits DMA.Ping-Ke Shih
1. Both 32-bit and 64-bit use the same TX/RX buffer desc layout 2. Extend set_desc() and get_desc() to set and get 64-bit address 3. Remove directive DMA_IS_64BIT 4. Add module parameter to turn on 64-bit dma Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-19rtlwifi: remove useless codeGustavo A. R. Silva
Remove useless local variables last_read_point and last_txw_point and the code related. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-21rtlwifi: Add TX report and disable key to force wait until report acked.Ping-Ke Shih
When using EAPOL to do a PTK rekey, there is a possible race condition. When msg 3/4 is received, the supplicant will send msg 4/4 and install the new key immediately; however, the driver must make sure that msg 4/4 is sent before installing the new key. We use TX report to ensure it is sent. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-28mac80211: separate encoding/bandwidth from flagsJohannes Berg
We currently use a lot of flags that are mutually incompatible, separate this out into actual encoding and bandwidth enum values. Much of this again done with spatch, with manual post-editing, mostly to add the switch statements and get rid of the conversions. @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_80MHZ +status->bw = RATE_INFO_BW_80 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_40MHZ +status->bw = RATE_INFO_BW_40 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_20MHZ +status->bw = RATE_INFO_BW_20 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_160MHZ +status->bw = RATE_INFO_BW_160 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_5MHZ +status->bw = RATE_INFO_BW_5 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_10MHZ +status->bw = RATE_INFO_BW_10 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_VHT +status->encoding = RX_ENC_VHT @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_HT +status->encoding = RX_ENC_HT @@ expression status; @@ -status.enc_flags |= RX_ENC_FLAG_VHT +status.encoding = RX_ENC_VHT @@ expression status; @@ -status.enc_flags |= RX_ENC_FLAG_HT +status.encoding = RX_ENC_HT @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_HT) +(status->encoding == RX_ENC_HT) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_VHT) +(status->encoding == RX_ENC_VHT) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_5MHZ) +(status->bw == RATE_INFO_BW_5) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_10MHZ) +(status->bw == RATE_INFO_BW_10) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_40MHZ) +(status->bw == RATE_INFO_BW_40) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_80MHZ) +(status->bw == RATE_INFO_BW_80) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_160MHZ) +(status->bw == RATE_INFO_BW_160) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28mac80211: clean up rate encoding bits in RX statusJohannes Berg
In preparation for adding support for HE rates, clean up the driver report encoding for rate/bandwidth reporting on RX frames. Much of this patch was done with the following spatch: @@ expression status; @@ -status->flag & (RX_FLAG_HT | RX_FLAG_VHT) +status->enc_flags & (RX_ENC_FLAG_HT | RX_ENC_FLAG_VHT) @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_SHORTPRE +status->enc_flags op RX_ENC_FLAG_SHORTPRE @@ expression status; @@ -status->flag & RX_FLAG_SHORTPRE +status->enc_flags & RX_ENC_FLAG_SHORTPRE @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_HT +status->enc_flags op RX_ENC_FLAG_HT @@ expression status; @@ -status->flag & RX_FLAG_HT +status->enc_flags & RX_ENC_FLAG_HT @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_40MHZ +status->enc_flags op RX_ENC_FLAG_40MHZ @@ expression status; @@ -status->flag & RX_FLAG_40MHZ +status->enc_flags & RX_ENC_FLAG_40MHZ @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_SHORT_GI +status->enc_flags op RX_ENC_FLAG_SHORT_GI @@ expression status; @@ -status->flag & RX_FLAG_SHORT_GI +status->enc_flags & RX_ENC_FLAG_SHORT_GI @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_HT_GF +status->enc_flags op RX_ENC_FLAG_HT_GF @@ expression status; @@ -status->flag & RX_FLAG_HT_GF +status->enc_flags & RX_ENC_FLAG_HT_GF @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_VHT +status->enc_flags op RX_ENC_FLAG_VHT @@ expression status; @@ -status->flag & RX_FLAG_VHT +status->enc_flags & RX_ENC_FLAG_VHT @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_STBC_MASK +status->enc_flags op RX_ENC_FLAG_STBC_MASK @@ expression status; @@ -status->flag & RX_FLAG_STBC_MASK +status->enc_flags & RX_ENC_FLAG_STBC_MASK @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_LDPC +status->enc_flags op RX_ENC_FLAG_LDPC @@ expression status; @@ -status->flag & RX_FLAG_LDPC +status->enc_flags & RX_ENC_FLAG_LDPC @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_10MHZ +status->enc_flags op RX_ENC_FLAG_10MHZ @@ expression status; @@ -status->flag & RX_FLAG_10MHZ +status->enc_flags & RX_ENC_FLAG_10MHZ @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_5MHZ +status->enc_flags op RX_ENC_FLAG_5MHZ @@ expression status; @@ -status->flag & RX_FLAG_5MHZ +status->enc_flags & RX_ENC_FLAG_5MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_80MHZ +status->enc_flags op RX_ENC_FLAG_80MHZ @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_80MHZ +status->enc_flags & RX_ENC_FLAG_80MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_160MHZ +status->enc_flags op RX_ENC_FLAG_160MHZ @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_160MHZ +status->enc_flags & RX_ENC_FLAG_160MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_BF +status->enc_flags op RX_ENC_FLAG_BF @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_BF +status->enc_flags & RX_ENC_FLAG_BF @@ assignment operator op; expression status, STBC; @@ -status->flag op STBC << RX_FLAG_STBC_SHIFT +status->enc_flags op STBC << RX_ENC_FLAG_STBC_SHIFT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_SHORTPRE +status.enc_flags op RX_ENC_FLAG_SHORTPRE @@ expression status; @@ -status.flag & RX_FLAG_SHORTPRE +status.enc_flags & RX_ENC_FLAG_SHORTPRE @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_HT +status.enc_flags op RX_ENC_FLAG_HT @@ expression status; @@ -status.flag & RX_FLAG_HT +status.enc_flags & RX_ENC_FLAG_HT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_40MHZ +status.enc_flags op RX_ENC_FLAG_40MHZ @@ expression status; @@ -status.flag & RX_FLAG_40MHZ +status.enc_flags & RX_ENC_FLAG_40MHZ @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_SHORT_GI +status.enc_flags op RX_ENC_FLAG_SHORT_GI @@ expression status; @@ -status.flag & RX_FLAG_SHORT_GI +status.enc_flags & RX_ENC_FLAG_SHORT_GI @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_HT_GF +status.enc_flags op RX_ENC_FLAG_HT_GF @@ expression status; @@ -status.flag & RX_FLAG_HT_GF +status.enc_flags & RX_ENC_FLAG_HT_GF @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_VHT +status.enc_flags op RX_ENC_FLAG_VHT @@ expression status; @@ -status.flag & RX_FLAG_VHT +status.enc_flags & RX_ENC_FLAG_VHT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_STBC_MASK +status.enc_flags op RX_ENC_FLAG_STBC_MASK @@ expression status; @@ -status.flag & RX_FLAG_STBC_MASK +status.enc_flags & RX_ENC_FLAG_STBC_MASK @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_LDPC +status.enc_flags op RX_ENC_FLAG_LDPC @@ expression status; @@ -status.flag & RX_FLAG_LDPC +status.enc_flags & RX_ENC_FLAG_LDPC @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_10MHZ +status.enc_flags op RX_ENC_FLAG_10MHZ @@ expression status; @@ -status.flag & RX_FLAG_10MHZ +status.enc_flags & RX_ENC_FLAG_10MHZ @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_5MHZ +status.enc_flags op RX_ENC_FLAG_5MHZ @@ expression status; @@ -status.flag & RX_FLAG_5MHZ +status.enc_flags & RX_ENC_FLAG_5MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_80MHZ +status.enc_flags op RX_ENC_FLAG_80MHZ @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_80MHZ +status.enc_flags & RX_ENC_FLAG_80MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_160MHZ +status.enc_flags op RX_ENC_FLAG_160MHZ @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_160MHZ +status.enc_flags & RX_ENC_FLAG_160MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_BF +status.enc_flags op RX_ENC_FLAG_BF @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_BF +status.enc_flags & RX_ENC_FLAG_BF @@ assignment operator op; expression status, STBC; @@ -status.flag op STBC << RX_FLAG_STBC_SHIFT +status.enc_flags op STBC << RX_ENC_FLAG_STBC_SHIFT @@ @@ -RX_FLAG_STBC_SHIFT +RX_ENC_FLAG_STBC_SHIFT Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-12-30rtlwifi: Replace local debug macro RT_ASSERTLarry Finger
This macro can be replaced with WARN_ONCE. In addition to using a standard debugging macro for these critical errors, we also get a stack dump. In rtl8821ae/hw.c, a senseless comment was removed, and an incorrect indentation was fixed. This patch also fixes two places in each of rtl8192ee, rtl8723be, and rtl8821ae where the logical condition was incorrect. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-07-08rtlwifi: Add missing newlines to RT_TRACE callsJoe Perches
RT_TRACE does not add a newline to the end of a message and always emits at KERN_DEBUG so these are susceptible to message interleaving from other processes without the newline. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-06-29rtlwifi: use s8 instead of charArnd Bergmann
Compiling the rtlwifi drivers for ARM with gcc -Wextra warns about lots of incorrect code that results from 'char' being unsigned here, e.g. realtek/rtlwifi/rc.c:113:18: error: comparison is always true due to limited range of data type [-Werror=type-limits] realtek/rtlwifi/rtl8188ee/dm.c:1070:22: error: comparison is always false due to limited range of data type [-Werror=type-limits] realtek/rtlwifi/rtl8192ce/trx.c:54:16: error: comparison is always false due to limited range of data type [-Werror=type-limits] realtek/rtlwifi/rtl8192cu/mac.c:601:16: error: comparison is always false due to limited range of data type [-Werror=type-limits] realtek/rtlwifi/rtl8192de/trx.c:53:16: error: comparison is always false due to limited range of data type [-Werror=type-limits] realtek/rtlwifi/rtl8192ee/phy.c:1268:12: error: comparison is always true due to limited range of data type [-Werror=type-limits] realtek/rtlwifi/rtl8192se/rf.c:150:20: error: comparison is always false due to limited range of data type [-Werror=type-limits] realtek/rtlwifi/rtl8723be/dm.c:877:29: error: comparison is always false due to limited range of data type [-Werror=type-limits] realtek/rtlwifi/rtl8723be/phy.c:386:16: error: comparison is always true due to limited range of data type [-Werror=type-limits] realtek/rtlwifi/rtl8821ae/dm.c:1514:38: error: comparison is always false due to limited range of data type [-Werror=type-limits] realtek/rtlwifi/rtl8821ae/phy.c:1558:11: error: comparison is always false due to limited range of data type [-Werror=type-limits] realtek/rtlwifi/rtl8821ae/phy.c:386:24: error: comparison is always false due to limited range of data type [-Werror=type-limits] realtek/rtlwifi/rtl8821ae/trx.c:55:12: error: comparison is always false due to limited range of data type [-Werror=type-limits] realtek/rtlwifi/stats.c:31:16: error: comparison is always false due to limited range of data type [-Werror=type-limits] This patch changes all uses of 'char' in this driver that refer to 8-bit integers to use 's8' instead, which is signed on all architectures. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-06rtlwifi: rtl8192ee: Fix Smatch warningLarry Finger
Smatch lists the following: CHECK drivers/net/wireless/realtek/rtlwifi/rtl8192ee/trx.c drivers/net/wireless/realtek/rtlwifi/rtl8192ee/trx.c:371 rtl92ee_rx_query_desc() warn: inconsistent indenting Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-03-07rtlwifi: pass struct rtl_stats by reference as it is more efficientColin Ian King
passing rtl_stats by value is inefficient; the structure is over 300 bytes in size and generally just one field (packet_report_type) is being accessed, so the pass by value is a relatively large overhead. This change just affects just the rx_command_packet calls. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-10-14rtlwifi: rtl818x: Move drivers into new realtek directoryLarry Finger
Now that a new mac80211-based driver for Realtek devices has been submitted, it is time to reorganize the directories. Rather than having directories rtlwifi and rtl818x be in drivers/net/wireless/, they will now be in drivers/net/wireless/realtek/. This change simplifies the directory structure, but does not result in any configuration changes that are visable to the user. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit (git 2.34.1) at 2025-07-15 21:28:07 +0000