summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/realtek/rtlwifi/rtl8821ae
AgeCommit message (Collapse)Author
2025-05-05wifi: rtlwifi: Remove uncalled stub rtl*_phy_ap_calibrateDr. David Alan Gilbert
rtl92d_phy_ap_calibrate(), rtl92du_phy_ap_calibrate(), rtl92ee_phy_ap_calibrate(), and rtl8821ae_phy_ap_calibrate() are all empty function stubs that are never called anywhere. Remove them. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250425235340.288340-3-linux@treblig.org
2024-12-23wifi: rtlwifi: rtl8821ae: Fix media status reportBitterblue Smith
RTL8821AE is stuck transmitting at the lowest rate allowed by the rate mask. This is because the firmware doesn't know the device is connected to a network. Fix the macros SET_H2CCMD_MSRRPT_PARM_OPMODE and SET_H2CCMD_MSRRPT_PARM_MACID_IND to work on the first byte of __cmd, not the second. Now the firmware is correctly notified when the device is connected to a network and it activates the rate control. Before (MCS3): [ 5] 0.00-1.00 sec 12.5 MBytes 105 Mbits/sec 0 339 KBytes [ 5] 1.00-2.00 sec 10.6 MBytes 89.1 Mbits/sec 0 339 KBytes [ 5] 2.00-3.00 sec 10.6 MBytes 89.1 Mbits/sec 0 386 KBytes [ 5] 3.00-4.00 sec 10.6 MBytes 89.1 Mbits/sec 0 386 KBytes [ 5] 4.00-5.00 sec 10.2 MBytes 86.0 Mbits/sec 0 427 KBytes After (MCS9): [ 5] 0.00-1.00 sec 33.9 MBytes 284 Mbits/sec 0 771 KBytes [ 5] 1.00-2.00 sec 31.6 MBytes 265 Mbits/sec 0 865 KBytes [ 5] 2.00-3.00 sec 29.9 MBytes 251 Mbits/sec 0 963 KBytes [ 5] 3.00-4.00 sec 28.2 MBytes 237 Mbits/sec 0 963 KBytes [ 5] 4.00-5.00 sec 26.8 MBytes 224 Mbits/sec 0 963 KBytes Fixes: 39f40710d0b5 ("rtlwifi: rtl88821ae: Remove usage of private bit manipulation macros") Cc: stable@vger.kernel.org Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/754785b3-8a78-4554-b80d-de5f603b410b@gmail.com
2024-11-18wifi: rtlwifi: rtl8821ae: phy: restore removed code to fix infinite loopColin Ian King
A previous clean-up fix removed the assignment of v2 inside a while loop that turned it into an infinite loop. Fix this by restoring the assignment of v2 from array[] so that v2 is updated inside the loop. Fixes: cda37445718d ("wifi: rtlwifi: rtl8821ae: phy: remove some useless code") Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Tested-by: Ping-Ke Shih <pkshih@realtek.com> Reviewed-by: Su Hui <suhui@nfschina.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20241106154642.1627886-1-colin.i.king@gmail.com
2024-10-25wifi: rtlwifi: use MODULE_FIRMWARE() to declare used firmwarePing-Ke Shih
Some used firmware are missing to be added to MODULE_FIRMWARE(). Add them accordingly. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20241018055651.21166-1-pkshih@realtek.com
2024-07-05wifi: rtlwifi: fix default typoFredrik Lönnegren
Change 'defult' to 'default' in comments in several rtlwifi drivers. Signed-off-by: Fredrik Lönnegren <fredrik@frelon.se> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20240703070627.135328-1-fredrik@frelon.se
2023-12-21wifi: rtlwifi: rtl8821ae: phy: using calculate_bit_shift()Su Hui
using calculate_bit_shift() to replace _rtl8821ae_phy_calculate_bit_shift(). Signed-off-by: Su Hui <suhui@nfschina.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231219065739.1895666-3-suhui@nfschina.com
2023-12-01wifi: rtlwifi: rtl8821ae: Access full PMCS reg and use pci_regs.hIlpo Järvinen
_rtl8821ae_clear_pci_pme_status() accesses the upper byte of the Power Management Control/Status register (PMCS) with literal 5 offset. Access the entire PMCS register using defines from pci_regs.h to improve code readability. While at it, remove the obvious comment and tweak debug prints slightly to not sound misleading. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231124084725.12738-9-ilpo.jarvinen@linux.intel.com
2023-12-01wifi: rtlwifi: rtl8821ae: Add pdev into _rtl8821ae_clear_pci_pme_status()Ilpo Järvinen
Add local variable pdev to shorten rtlpci->pdev. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231124084725.12738-8-ilpo.jarvinen@linux.intel.com
2023-12-01wifi: rtlwifi: rtl8821ae: Use pci_find_capability()Ilpo Järvinen
Instead of open coding the capability structure search, find the PM Capability using pci_find_capability(). While at it, rename the generic 'cap_pointer' to 'pm_cap' which makes the intent of the code more obvious. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231124084725.12738-7-ilpo.jarvinen@linux.intel.com
2023-12-01wifi: rtlwifi: rtl8821ae: Reverse PM Capability exists checkIlpo Järvinen
Check if PM Capability does not exists and return early which follows the usual error handling pattern. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231124084725.12738-6-ilpo.jarvinen@linux.intel.com
2023-12-01wifi: rtlwifi: rtl8821ae: Remove unnecessary PME_Status bit setIlpo Järvinen
BIT(7) (PME_Status) is first checked and then set unnecessarily. Remove the unnecessary setting for the bit that is already on and adjust the comment related to it. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231124084725.12738-5-ilpo.jarvinen@linux.intel.com
2023-11-30wifi: rtlwifi: rtl8821ae: phy: fix an undefined bitwise shift behaviorSu Hui
Clang static checker warns: drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c:184:49: The result of the left shift is undefined due to shifting by '32', which is greater or equal to the width of type 'u32'. [core.UndefinedBinaryOperatorResult] If the value of the right operand is negative or is greater than or equal to the width of the promoted left operand, the behavior is undefined.[1][2] For example, when using different gcc's compilation optimization options (-O0 or -O2), the result of '(u32)data << 32' is different. One is 0, the other is old value of data. Let _rtl8821ae_phy_calculate_bit_shift()'s return value less than 32 to fix this problem. Warn if bitmask is zero. [1] https://stackoverflow.com/questions/11270492/what-does-the-c-standard-say-about-bitshifting-more-bits-than-the-width-of-type [2] https://www.open-std.org/jtc1/sc22/wg14/www/docs/n1256.pdf Fixes: 21e4b0726dc6 ("rtlwifi: rtl8821ae: Move driver from staging to regular tree") Signed-off-by: Su Hui <suhui@nfschina.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231127013511.26694-2-suhui@nfschina.com
2023-11-30wifi: rtlwifi: rtl8821ae: phy: remove some useless codeSu Hui
Clang static checker warns: Value stored to 'v1' is never read [deadcode.DeadStores] Value stored to 'channel' is never read [deadcode.DeadStores] Remove them to save some place. Signed-off-by: Su Hui <suhui@nfschina.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231127013511.26694-1-suhui@nfschina.com
2023-11-22wifi: rtlwifi: drop unused const_amdpci_aspmBjorn Helgaas
Remove the unused "const_amdpci_aspm" member of struct rtl_pci and struct rtl_ps_ctl. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231116180529.52752-1-helgaas@kernel.org
2023-10-14wifi: rtlwifi: simplify TX command fill callbacksDmitry Antipov
Since 'rtlpriv->cfg->ops->fill_tx_cmddesc()' is always called with 'firstseg' and 'lastseg' set to 1 (and the latter is never actually used), all of the relevant chip-specific routines may be simplified. Compile tested only. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231011154442.52457-2-dmantipov@yandex.ru
2023-10-12wifi: rtlwifi: use convenient list_count_nodes()Dmitry Antipov
Simplify 'rtl92ee_dm_common_info_self_update()', 'rtl8723be_dm_common_info_self_update()', and 'rtl8821ae_dm_common_info_self_update()' by using 'list_count_nodes()'. Compile tested only. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231011045227.7989-1-dmantipov@yandex.ru
2023-09-28wifi: rtlwifi: cleanup few rtlxxxx_set_hw_reg() routinesDmitry Antipov
Since 'u8' comparison against zero is always false, drop the corresponding branches of AMPDU_MIN_SPACE adjustment within 'rtlxxxx_set_hw_reg()' for rtl8188ee, rtl8192ce, rtl8192de, rtl8723ae, rtl8723be, and rtl8821ae. Compile tested only. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230925090452.25633-1-dmantipov@yandex.ru
2023-06-21wifi: rtlwifi: simplify LED managementDmitry Antipov
Introduce 'rtl_init_sw_leds()' to replace per-chip LED initialization code (and so drop 'struct rtl_led' as no longer used), drop 'init_sw_leds' and 'deinit_sw_leds' fields from 'struct rtl_hal_ops', adjust related code. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230614061832.40882-1-dmantipov@yandex.ru
2022-12-14wifi: rtlwifi: Fix global-out-of-bounds bug in ↵Li Zetao
_rtl8812ae_phy_set_txpower_limit() There is a global-out-of-bounds reported by KASAN: BUG: KASAN: global-out-of-bounds in _rtl8812ae_eq_n_byte.part.0+0x3d/0x84 [rtl8821ae] Read of size 1 at addr ffffffffa0773c43 by task NetworkManager/411 CPU: 6 PID: 411 Comm: NetworkManager Tainted: G D 6.1.0-rc8+ #144 e15588508517267d37 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), Call Trace: <TASK> ... kasan_report+0xbb/0x1c0 _rtl8812ae_eq_n_byte.part.0+0x3d/0x84 [rtl8821ae] rtl8821ae_phy_bb_config.cold+0x346/0x641 [rtl8821ae] rtl8821ae_hw_init+0x1f5e/0x79b0 [rtl8821ae] ... </TASK> The root cause of the problem is that the comparison order of "prate_section" in _rtl8812ae_phy_set_txpower_limit() is wrong. The _rtl8812ae_eq_n_byte() is used to compare the first n bytes of the two strings from tail to head, which causes the problem. In the _rtl8812ae_phy_set_txpower_limit(), it was originally intended to meet this requirement by carefully designing the comparison order. For example, "pregulation" and "pbandwidth" are compared in order of length from small to large, first is 3 and last is 4. However, the comparison order of "prate_section" dose not obey such order requirement, therefore when "prate_section" is "HT", when comparing from tail to head, it will lead to access out of bounds in _rtl8812ae_eq_n_byte(). As mentioned above, the _rtl8812ae_eq_n_byte() has the same function as strcmp(), so just strcmp() is enough. Fix it by removing _rtl8812ae_eq_n_byte() and use strcmp() barely. Although it can be fixed by adjusting the comparison order of "prate_section", this may cause the value of "rate_section" to not be from 0 to 5. In addition, commit "21e4b0726dc6" not only moved driver from staging to regular tree, but also added setting txpower limit function during the driver config phase, so the problem was introduced by this commit. Fixes: 21e4b0726dc6 ("rtlwifi: rtl8821ae: Move driver from staging to regular tree") Signed-off-by: Li Zetao <lizetao1@huawei.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221212025812.1541311-1-lizetao1@huawei.com
2022-12-14wifi: rtlwifi: rtl8821ae: don't call kfree_skb() under spin_lock_irqsave()Yang Yingliang
It is not allowed to call kfree_skb() from hardware interrupt context or with interrupts being disabled. All the SKBs have been dequeued from the old queue, so it's safe to enqueue these SKBs to a free queue, then free them after spin_unlock_irqrestore() at once. Compile tested only. Fixes: 5c99f04fec93 ("rtlwifi: rtl8723be: Update driver to match Realtek release of 06/28/14") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221207141411.46098-2-yangyingliang@huawei.com
2022-04-12rtlwifi: Fix spelling mistake "cacluated" -> "calculated"Lv Ruyi
There are some spelling mistakes in the comments. Fix it. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220408095803.2495336-1-lv.ruyi@zte.com.cn
2022-04-11mac80211: prepare sta handling for MLO supportSriram R
Currently in mac80211 each STA object is represented using sta_info datastructure with the associated STA specific information and drivers access ieee80211_sta part of it. With MLO (Multi Link Operation) support being added in 802.11be standard, though the association is logically with a single Multi Link capable STA, at the physical level communication can happen via different advertised links (uniquely identified by Channel, operating class, BSSID) and hence the need to handle multiple link STA parameters within a composite sta_info object called the MLD STA. The different link STA part of MLD STA are identified using the link address which can be same or different as the MLD STA address and unique link id based on the link vif. To support extension of such a model, the sta_info datastructure is modified to hold multiple link STA objects with link specific params currently within sta_info moved to this new structure. Similarly this is done for ieee80211_sta as well which will be accessed within mac80211 as well as by drivers, hence trivial driver changes are expected to support this. For current non MLO supported drivers, only one link STA is present and link information is accessed via 'deflink' member. For MLO drivers, we still need to define the APIs etc. to get the correct link ID and access the correct part of the station info. Currently in mac80211, all link STA info are accessed directly via deflink. These will be updated to access via link pointers indexed by link id with MLO support patches, with link id being 0 for non MLO supported cases. Except for couple of macro related changes, below spatch takes care of updating mac80211 and driver code to access to the link STA info via deflink. @ieee80211_sta@ struct ieee80211_sta *s; struct sta_info *si; identifier var = {supp_rates, ht_cap, vht_cap, he_cap, he_6ghz_capa, eht_cap, rx_nss, bandwidth, txpwr}; @@ ( s-> - var + deflink.var | si->sta. - var + deflink.var ) @sta_info@ struct sta_info *si; identifier var = {gtk, pcpu_rx_stats, rx_stats, rx_stats_avg, status_stats, tx_stats, cur_max_bandwidth}; @@ ( si-> - var + deflink.var ) Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Link: https://lore.kernel.org/r/1649086883-13246-1-git-send-email-quic_srirrama@quicinc.com [remove MLO-drivers notes from commit message, not clear yet; run spatch] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-03-16rtlwifi: rtl8821ae: fix typos in commentsJulia Lawall
Various spelling mistakes in comments. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220314115354.144023-20-Julia.Lawall@inria.fr
2021-04-17rtlwifi: 8821ae: upgrade PHY and RF parametersPing-Ke Shih
The signal strength of 5G is quite low, so user can't connect to an AP far away. New parameters with new format and its parser are updated by the commit 84d26fda52e2 ("rtlwifi: Update 8821ae new phy parameters and its parser."), but some parameters are missing. Use this commit to update to the novel parameters that use new format. Fixes: 84d26fda52e2 ("rtlwifi: Update 8821ae new phy parameters and its parser") Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210219052607.7323-1-pkshih@realtek.com
2021-02-10rtlwifi: rtl8821ae: phy: Simplify bool comparisonJiapeng Chong
Fix the following coccicheck warning: ./drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c:3853:7-17: WARNING: Comparison of 0/1 to bool variable. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1612840381-109714-1-git-send-email-jiapeng.chong@linux.alibaba.com
2021-01-25rtlwifi: rtl8821ae: fix bool comparison in expressionsAditya Srivastava
There are certain conditional expressions in rtl8821ae, where a boolean variable is compared with true/false, in forms such as (foo == true) or (false != bar), which does not comply with checkpatch.pl (CHECK: BOOL_COMPARISON), according to which boolean variables should be themselves used in the condition, rather than comparing with true/false E.g., in drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c, "if (rtlefuse->autoload_failflag == false)" can be replaced with "if (!rtlefuse->autoload_failflag)" Replace all such expressions with the bool variables appropriately Signed-off-by: Aditya Srivastava <yashsri421@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210110121525.2407-6-yashsri421@gmail.com
2020-11-10rtlwifi: fix spelling typo of workaroundWang Qing
workarould -> workaround Signed-off-by: Wang Qing <wangqing@vivo.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1604738439-24794-1-git-send-email-wangqing@vivo.com
2020-11-07rtlwifi: rtl8821ae: Place braces around empty if() bodyLee Jones
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c: In function ‘_rtl8812ae_phy_get_txpower_limit’: drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c:2453:3: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-35-lee.jones@linaro.org
2020-11-07rtlwifi: rtl8821ae: phy: Remove a couple of unused variablesLee Jones
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c: In function ‘rtl8821ae_phy_switch_wirelessband’: drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c:597:14: warning: variable ‘rxpath’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c:597:6: warning: variable ‘txpath’ set but not used [-Wunused-but-set-variable] Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-34-lee.jones@linaro.org
2020-11-07rtlwifi: fix -Wpointer-sign warningArnd Bergmann
There are thousands of warnings in a W=2 build from just one file: drivers/net/wireless/realtek/rtlwifi/rtl8821ae/table.c:3788:15: warning: pointer targets in initialization of 'u8 *' {aka 'unsigned char *'} from 'char *' differ in signedness [-Wpointer-sign] Change the types to consistently use 'const char *' for the strings. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201026213040.3889546-6-arnd@kernel.org
2020-11-07wireless: remove unneeded breakTom Rix
A break is not needed if it is preceded by a return Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201020125841.26791-1-trix@redhat.com
2020-09-22rtlwifi: rtl8821ae: use true,false for bool variable large_cfo_hitJason Yan
This addresses the following coccinelle warning: drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c:2680:27-47: WARNING: Comparison of 0/1 to bool variable drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c:2683:3-23: WARNING: Assignment of 0/1 to bool variable drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c:2686:3-23: WARNING: Assignment of 0/1 to bool variable Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200919074428.3459234-1-yanaijie@huawei.com
2020-09-22rtlwifi: Use ffs in <foo>_phy_calculate_bit_shiftJoe Perches
Remove the loop and use the generic ffs instead. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/e2ab424d24b74901bc0c39f0c60f75e871adf2ba.camel@perches.com
2020-09-21rtlwifi: rtl8821ae: fix comparison to bool warning in phy.cZheng Bin
Fixes coccicheck warning: drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c:1816:5-13: WARNING: Comparison to bool drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c:1825:5-13: WARNING: Comparison to bool drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c:1839:5-13: WARNING: Comparison to bool Signed-off-by: Zheng Bin <zhengbin13@huawei.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200918102505.16036-6-zhengbin13@huawei.com
2020-09-21rtlwifi: rtl8821ae: fix comparison to bool warning in hw.cZheng Bin
Fixes coccicheck warning: drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c:1897:5-13: WARNING: Comparison to bool Signed-off-by: Zheng Bin <zhengbin13@huawei.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200918102505.16036-5-zhengbin13@huawei.com
2020-09-09rtlwifi: switch from 'pci_' to 'dma_' APIChristophe JAILLET
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. The only file where some GFP_ flags are updated is 'pci.c'. When memory is allocated in '_rtl_pci_init_tx_ring()' and '_rtl_pci_init_rx_ring()' GFP_KERNEL can be used because both functions are called from a probe function and no spinlock is taken. The call chain is: rtl_pci_probe --> rtl_pci_init --> _rtl_pci_init_trx_ring --> _rtl_pci_init_rx_ring --> _rtl_pci_init_tx_ring @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200907193828.318233-1-christophe.jaillet@wanadoo.fr
2020-09-02rtlwifi: rtl8821ae: Rename RT_TRACE to rtl_dbgLarry Finger
Change the misleading macro name to one that is more descriptive for rtl8821ae. Changes suggested by ckeckpatch.pl have been made. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200831184536.29950-1-Larry.Finger@lwfinger.net
2020-09-01rtlwifi: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200821061807.GA8412@embeddedor
2020-07-15rtlwifi: 8821ae: remove unused path B parameters from swing tablePing-Ke Shih
8821AE is a 1x1 chip, so swing parameters for path B aren't necessary. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200629055843.25394-2-pkshih@realtek.com
2020-07-15rtlwifi: Use const in 8188ee/8723be/8821ae swing_table declarationsJoe Perches
Reduce data usage about 1KB by using const. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200629055843.25394-1-pkshih@realtek.com
2020-04-21rtlwifi: rtl8821ae: use true,false for bool variablesJason Yan
Fix the following coccicheck warning: drivers/net/wireless/realtek/rtlwifi/rtl8821ae/sw.c:79:1-34: WARNING: Assignment of 0/1 to bool variable drivers/net/wireless/realtek/rtlwifi/rtl8821ae/sw.c:81:1-34: WARNING: Assignment of 0/1 to bool variable Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200418070236.9620-6-yanaijie@huawei.com
2020-01-26rtlwifi: rtl8821ae: remove unused variablesYueHaibing
drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c:142:17: warning: cckswing_table_ch1ch13 defined but not used [-Wunused-const-variable=] drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c:178:17: warning: cckswing_table_ch14 defined but not used [-Wunused-const-variable=] drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c:96:18: warning: ofdmswing_table defined but not used [-Wunused-const-variable=] These variable is never used, so remove them. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26rtlwifi: rtl8821ae: Make functions static & rm sw.hAmadeusz Sławiński
Some of functions which were exposed in sw.h, are only used in sw.c, so just make them static. This makes sw.h unnecessary, so remove it. Signed-off-by: Amadeusz Sławiński <amade@asmblr.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18rtlwifi: rtl88821ae: Remove usage of private bit manipulation macrosLarry Finger
Besides the previously changed macros for the RX and TX descriptors. the local macros are used in other places. These are replaced with standard bit manipulation macros. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20rtlwifi: rf_lock use non-irqsave spin_lockPing-Ke Shih
rf_lock is used to protect RF register access, but they will not called from interrupt context, so *_irqsave version isn't necessary. Then, these delays don't affect IRQ services. The old code holds spin_lock_irqsave() that will be detected a long delay as below: kworker/-276 4d... 0us : _raw_spin_lock_irqsave kworker/-276 4d... 0us : rtl8723_phy_rf_serial_read <-rtl8723de_phy_set_rf_reg kworker/-276 4d... 1us : rtl8723_phy_query_bb_reg <-rtl8723_phy_rf_serial_read kworker/-276 4d... 3us : rtl8723_phy_set_bb_reg <-rtl8723_phy_rf_serial_read kworker/-276 4d... 4us : __const_udelay <-rtl8723_phy_rf_serial_read kworker/-276 4d... 4us!: delay_mwaitx <-rtl8723_phy_rf_serial_read kworker/-276 4d... 1004us : rtl8723_phy_set_bb_reg <-rtl8723_phy_rf_serial_read [...] Reported-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-31rtlwifi: rtl8821ae: Drop condition with no effectSaurav Girepunje
As the "else if" and "else" branch body are identical the condition has no effect. So drop the "else if" condition. Signed-off-by: Saurav Girepunje <saurav.girepunje@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-09rtlwifi: rtl8821ae: Remove set but not used variables 'rtstatus','bd'zhengbin
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c: In function rtl8812ae_phy_config_rf_with_headerfile: drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c:2079:7: warning: variable rtstatus set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c: In function rtl8821ae_phy_config_rf_with_headerfile: drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c:2114:7: warning: variable rtstatus set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c: In function _rtl8812ae_phy_get_txpower_limit: drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c:2354:6: warning: variable bd set but not used [-Wunused-but-set-variable] They are not used since commit f1d2b4d338bf ("rtlwifi: rtl818x: Move drivers into new realtek directory") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtlwifi: rtl8188ee: rtl8192ce: rtl8192de: rtl8723ae: rtl8821ae: Remove some ↵Larry Finger
unused bit manipulation macros Each of these drivers defines some device to host macros that are never used, thus they can be removed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtlwifi: rtl8821ae: make array static const and remove redundant assignmentColin Ian King
The array channel_all can be make static const rather than populating it on the stack, this makes the code smaller. Also, variable place is being initialized with a value that is never read, so this assignment is redundant and can be removed. Before: text data bss dec hex filename 118537 9591 0 128128 1f480 realtek/rtlwifi/rtl8821ae/phy.o After: text data bss dec hex filename 118331 9687 0 128018 1f412 realtek/rtlwifi/rtl8821ae/phy.o Saves 110 bytes, (gcc version 9.2.1, amd64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-03rtlwifi: rtl8821ae: Fix incorrect returned valuesLarry Finger
In commit bd421dab7515 ("rtlwifi: rtl8821ae: Convert macros that set descriptor"), all the routines that get fields from a descriptor were changed to return signed integer values. This is incorrect for the routines that get the entire 32-bit word. In this case, an unsigned quantity is required. Fixes: bd421dab7515 ("rtlwifi: rtl8821ae: Convert macros that set descriptor") Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit (git 2.34.1) at 2025-07-15 17:56:59 +0000