summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/realtek/rtlwifi/usb.c
AgeCommit message (Collapse)Author
2024-12-12wifi: rtlwifi: destroy workqueue at rtl_deinit_coreThadeu Lima de Souza Cascardo
rtl_wq is allocated at rtl_init_core, so it makes more sense to destroy it at rtl_deinit_core. In the case of USB, where _rtl_usb_init does not require anything to be undone, that is fine. But for PCI, rtl_pci_init, which is called after rtl_init_core, needs to deallocate data, but only if it has been called. That means that destroying the workqueue needs to be done whether rtl_pci_init has been called or not. And since rtl_pci_deinit was doing it, it has to be moved out of there. It makes more sense to move it to rtl_deinit_core and have it done in both cases, USB and PCI. Since this is a requirement for a followup memory leak fix, mark this as fixing such memory leak. Fixes: 0c8173385e54 ("rtl8192ce: Add new driver") Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20241206173713.3222187-3-cascardo@igalia.com
2024-11-18wifi: rtlwifi: usb: fix workqueue leak when probe failsThadeu Lima de Souza Cascardo
rtl_init_core creates a workqueue that is then assigned to rtl_wq. rtl_deinit_core does not destroy it. It is left to rtl_usb_deinit, which must be called in the probe error path. Fixes: 2ca20f79e0d8 ("rtlwifi: Add usb driver") Fixes: 851639fdaeac ("rtlwifi: Modify some USB de-initialize code.") Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20241107133322.855112-6-cascardo@igalia.com
2024-11-18wifi: rtlwifi: fix init_sw_vars leak when probe failsThadeu Lima de Souza Cascardo
If ieee80211_register_hw fails, the memory allocated for the firmware will not be released. Call deinit_sw_vars as the function that undoes the allocationes done by init_sw_vars. Fixes: cefe3dfdb9f5 ("rtl8192cu: Call ieee80211_register_hw from rtl_usb_probe") Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20241107133322.855112-5-cascardo@igalia.com
2024-11-18wifi: rtlwifi: wait for firmware loading before releasing memoryThadeu Lima de Souza Cascardo
At probe error path, the firmware loading work may have already been queued. In such a case, it will try to access memory allocated by the probe function, which is about to be released. In such paths, wait for the firmware worker to finish before releasing memory. Fixes: a7f7c15e945a ("rtlwifi: rtl8192cu: Free ieee80211_hw if probing fails") Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20241107133322.855112-4-cascardo@igalia.com
2024-11-18wifi: rtlwifi: do not complete firmware loading needlesslyThadeu Lima de Souza Cascardo
The only code waiting for completion is driver removal, which will not be called when probe returns a failure. So this completion is unnecessary. Fixes: b0302aba812b ("rtlwifi: Convert to asynchronous firmware load") Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20241107133322.855112-2-cascardo@igalia.com
2024-05-30wifi: rtlwifi: handle return value of usb init TX/RXPing-Ke Shih
Handle error code to cause failed to USB probe result from unexpected USB EP number, otherwise when USB disconnect skb_dequeue() an uninitialized skb list and cause warnings below. usb 2-1: USB disconnect, device number 76 INFO: trying to register non-static key. The code is fine but needs lockdep annotation, or maybe you didn't initialize this object before use? turning off the locking correctness validator. CPU: 0 PID: 54060 Comm: kworker/0:1 Not tainted 6.9.0-rc7 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 Workqueue: usb_hub_wq hub_event Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x116/0x1b0 lib/dump_stack.c:114 assign_lock_key kernel/locking/lockdep.c:976 [inline] register_lock_class+0xc18/0xfa0 kernel/locking/lockdep.c:1289 __lock_acquire+0x108/0x3bc0 kernel/locking/lockdep.c:5014 lock_acquire kernel/locking/lockdep.c:5754 [inline] lock_acquire+0x1b0/0x550 kernel/locking/lockdep.c:5719 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x3d/0x60 kernel/locking/spinlock.c:162 skb_dequeue+0x20/0x180 net/core/skbuff.c:3846 rtl_usb_cleanup drivers/net/wireless/realtek/rtlwifi/usb.c:706 [inline] rtl_usb_deinit drivers/net/wireless/realtek/rtlwifi/usb.c:721 [inline] rtl_usb_disconnect+0x4a4/0x850 drivers/net/wireless/realtek/rtlwifi/usb.c:1051 usb_unbind_interface+0x1e8/0x980 drivers/usb/core/driver.c:461 device_remove drivers/base/dd.c:568 [inline] device_remove+0x122/0x170 drivers/base/dd.c:560 __device_release_driver drivers/base/dd.c:1270 [inline] device_release_driver_internal+0x443/0x620 drivers/base/dd.c:1293 bus_remove_device+0x22f/0x420 drivers/base/bus.c:574 device_del+0x395/0x9f0 drivers/base/core.c:3909 usb_disable_device+0x360/0x7b0 drivers/usb/core/message.c:1418 usb_disconnect+0x2db/0x930 drivers/usb/core/hub.c:2305 hub_port_connect drivers/usb/core/hub.c:5362 [inline] hub_port_connect_change drivers/usb/core/hub.c:5662 [inline] port_event drivers/usb/core/hub.c:5822 [inline] hub_event+0x1e39/0x4ce0 drivers/usb/core/hub.c:5904 process_one_work+0x97b/0x1a90 kernel/workqueue.c:3267 process_scheduled_works kernel/workqueue.c:3348 [inline] worker_thread+0x680/0xf00 kernel/workqueue.c:3429 kthread+0x2c7/0x3b0 kernel/kthread.c:388 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Reported-by: Shichao Lai <shichaorai@gmail.com> Closes: https://lore.kernel.org/linux-wireless/CAEk6kZuuezkH1dVRJf3EAVZK-83=OpTz62qCugkpTkswj8JF6w@mail.gmail.com/T/#u Tested-by: Shichao Lai <shichaorai@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/20240524003248.5952-1-pkshih@realtek.com
2024-05-30wifi: rtlwifi: Constify rtl_hal_cfg.{ops,usb_interface_cfg} and rtl_priv.cfgBitterblue Smith
This allows the drivers to declare the structs rtl_hal_cfg, rtl_hal_ops, and rtl_hal_usbint_cfg as const. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/1b29994f-3d07-4297-875d-57c3a87a1ec6@gmail.com
2024-05-02wifi: rtlwifi: Adjust rtl8192d-common for USBBitterblue Smith
A few of the shared functions need small changes for the USB driver: - firmware loading - efuse reading - rate mask updating - rf register reading - initial gain for scanning Also, add a few macros to wifi.h and initialise rtlhal.interfaceindex for USB devices. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/28100330-f421-4b85-b41b-f1045380cef2@gmail.com
2024-02-15wifi: rtlwifi: rtl_usb: Store the endpoint addressesBitterblue Smith
And use the stored addresses in rtl8192cu instead of hardcoding them. This is what the vendor drivers do. Perhaps this is not strictly necessary for RTL8192CU devices. However, the dual mac version of RTL8192DU has two USB interfaces, each with its own set of endpoints. Hardcoding their addresses in the upcoming rtl8192du driver would require making some assumptions which I'm not qualified to make. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/7b6a602a-6101-4bab-958d-bcff4d565b40@gmail.com
2024-01-19wifi: rtlwifi: Speed up firmware loading for USBBitterblue Smith
Currently it takes almost 6 seconds to upload the firmware for RTL8192CU (and 11 seconds for RTL8192DU). That's because the firmware is uploaded one byte at a time. Also, after plugging the device, the firmware gets uploaded three times before a connection to the AP is established. Maybe this is fine for most users, but when testing changes to the driver it's really annoying to wait so long. Speed up the firmware upload by writing chunks of 64 bytes at a time. This way it takes about 110 ms for RTL8192CU (and about 210 ms for RTL8192DU). PCI devices could upload it in chunks of 4 bytes, but I don't have any to test and commit 89d32c9071aa ("rtlwifi: Download firmware as bytes rather than as dwords") decided otherwise anyway. Allocate memory for the firmware image with kmalloc instead of vzalloc because this memory is passed directly to usb_control_msg(), which can't take memory allocated by vmalloc. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/d9bd4949-6e92-4f35-8b60-3b45f9ad74ab@gmail.com
2024-01-12wifi: rtlwifi: rtl_usb: Use sync register writesBitterblue Smith
Currently rtl_usb performs register writes using the async usb_submit_urb() function. This appears to work fine for the RTL8192CU, but the RTL8192DU (soon to be supported by rtlwifi) has a problem: it transmits everything at the 1M rate in the 2.4 GHz band. (The 5 GHz band is still untested.) With this patch, rtl_usb performs the register writes using the synchronous usb_control_msg() function, and the RTL8192DU works normally. The RTL8192CU still works. The vendor drivers use the async writes in only one function, rtl8192du_trigger_gpio_0 / rtl8192cu_trigger_gpio_0, which probably doesn't even run in real life. They use sync writes everywhere else. Also, remove "sync" and "async" from the names of the members of struct rtl_io to avoid confusion: write{8,16,32}_async -> write{8,16,32} read{8,16,32}_sync -> read{8,16,32} Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/fb71bae6-8b19-4b6e-b4a6-0d260f2139e1@gmail.com
2023-06-21wifi: rtlwifi: cleanup USB interfaceDmitry Antipov
Drop unused '_usb_writen_sync()' and relevant pointer from 'struct rtl_io', handle possible write error in '_usb_write_async()', adjust related code. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230614061832.40882-2-dmantipov@yandex.ru
2023-06-21wifi: rtlwifi: simplify LED managementDmitry Antipov
Introduce 'rtl_init_sw_leds()' to replace per-chip LED initialization code (and so drop 'struct rtl_led' as no longer used), drop 'init_sw_leds' and 'deinit_sw_leds' fields from 'struct rtl_hal_ops', adjust related code. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230614061832.40882-1-dmantipov@yandex.ru
2023-06-01wifi: rtlwifi: use helper function rtl_get_hdr()Juhee Kang
Although rtl_get_hdr was added in commit 3dad618b7b92 ("rtlwifi: Change wifi.h for rtl8192se and rtl8192de"), it is currently not being utilized in some areas. This commit replaces the open code with the rtl_get_hdr() function. Signed-off-by: Juhee Kang <claudiajkang@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230527114954.3281-1-claudiajkang@gmail.com
2022-05-13rtlwifi: Use pr_warn instead of WARN_ONCEDongliang Mu
This memory allocation failure can be triggered by fault injection or high pressure testing, resulting a WARN. Fix this by replacing WARN with pr_warn. Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220511014453.1621366-1-dzm91@hust.edu.cn
2021-04-21rtlwifi: implement set_tim by update beacon contentPing-Ke Shih
Once beacon content is changed, we update the content to wifi card by send_beacon_frame(). Then, STA with PS can wake up properly to receive its packets. Since we update beacon content to PCI wifi devices every beacon interval, the only one usb device, 8192CU, needs to update beacon content when mac80211 calling set_tim. Reported-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Tested-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210419065956.6085-1-pkshih@realtek.com
2021-04-17rtlwifi: remove redundant assignment to variable errColin Ian King
Variable err is assigned -ENODEV followed by an error return path via label error_out that does not access the variable and returns with the -ENODEV error return code. The assignment to err is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210327230014.25554-1-colin.king@canonical.com
2021-02-08rtlwifi: use tasklet_setup to initialize rx_work_taskletEmil Renner Berthing
In commit d3ccc14dfe95 most of the tasklets in this driver was updated to the new API. However for the rx_work_tasklet only the type of the callback was changed from void _rtl_rx_work(unsigned long data) to void _rtl_rx_work(struct tasklet_struct *t). The initialization of rx_work_tasklet was still open-coded and the function pointer just cast into the old type, and hence nothing sets rx_work_tasklet.use_callback = true and the callback was still called as t->func(t->data); with uninitialized/zero t->data. Commit 6b8c7574a5f8 changed the casting of _rtl_rx_work a bit and initialized t->data to a pointer to the tasklet cast to an unsigned long. This way calling t->func(t->data) might actually work through all the casting, but it still doesn't update the code to use the new tasklet API. Let's use the new tasklet_setup to initialize rx_work_tasklet properly and set rx_work_tasklet.use_callback = true so that the callback is called as t->callback(t); without all the casting. Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210126171550.3066-1-kernel@esmil.dk
2020-11-07rtlwifi: Fix non-canonical address access issuesWeitaoWangoc
During realtek USB wireless NIC initialization, it's unexpected disconnection will cause urb sumbmit fail. On the one hand, _rtl_usb_cleanup_rx will be called to clean up rx stuff, especially for rtl_wq. On the other hand, disconnection will cause rtl_usb_disconnect and _rtl_usb_cleanup_rx to be called. So, rtl_wq will be flush/destroy twice, which will cause non-canonical address 0xdead000000000122 access and general protection fault. Fixed this issue by remove _rtl_usb_cleanup_rx when urb sumbmit fail. Signed-off-by: WeitaoWangoc <WeitaoWang-oc@zhaoxin.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1603768580-2798-1-git-send-email-WeitaoWang-oc@zhaoxin.com
2020-09-01rtlwifi: fix build warningAllen Pais
Tasklet conversion patch introduced a build warning in _rtl_usb_init_rx, this patch fixes the warning. Reported-by: kernel test robot <lkp@intel.com> Fixes: d3ccc14dfe95 ("rtlwifi/rtw88: convert tasklets to use new tasklet_setup() API") Signed-off-by: Allen Pais <allen.lkml@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200831043659.281712-1-allen.lkml@gmail.com
2020-08-31rtlwifi: Replace RT_TRACE with rtl_dbgLarry Finger
The macro name RT_TRACE makes it seem that it is used for tracing, when is actually used for debugging. Change the name to rtl_dbg. Any Sparse errors exposed by this change were also fixed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200723204244.24457-3-Larry.Finger@lwfinger.net
2020-08-27rtlwifi/rtw88: convert tasklets to use new tasklet_setup() APIAllen Pais
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly and remove .data field. Signed-off-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Allen Pais <allen.lkml@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200817090637.26887-16-allen.cryptic@gmail.com
2020-07-15rtlwifi: rtl8192cu: Free ieee80211_hw if probing failsReto Schneider
In case of an error, no one will use the allocated structure. Call ieee80211_free_hw, same as in rtl_usb_disconnect. Signed-off-by: Reto Schneider <code@reto-schneider.ch> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200622132113.14508-4-code@reto-schneider.ch
2020-07-15rtlwifi: rtl8192cu: Prevent leaking urbReto Schneider
If usb_submit_urb fails the allocated urb should be unanchored and released. Signed-off-by: Reto Schneider <code@reto-schneider.ch> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200622132113.14508-3-code@reto-schneider.ch
2020-07-15rtlwifi: rtl8192cu: Fix deadlockReto Schneider
Prevent code from calling itself indirectly, causing the driver to hang and consume 100% CPU. Without this fix, the following script can bring down a single CPU system: ``` while true; do rmmod rtl8192cu modprobe rtl8192cu done ``` Signed-off-by: Reto Schneider <code@reto-schneider.ch> ACKed-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200622132113.14508-2-code@reto-schneider.ch
2020-05-18rtlwifi: Fix a double free in _rtl_usb_tx_urb_setup()Dan Carpenter
Seven years ago we tried to fix a leak but actually introduced a double free instead. It was an understandable mistake because the code was a bit confusing and the free was done in the wrong place. The "skb" pointer is freed in both _rtl_usb_tx_urb_setup() and _rtl_usb_transmit(). The free belongs _rtl_usb_transmit() instead of _rtl_usb_tx_urb_setup() and I've cleaned the code up a bit to hopefully make it more clear. Fixes: 36ef0b473fbf ("rtlwifi: usb: add missing freeing of skbuff") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200513093951.GD347693@mwanda
2019-10-01rtlwifi: prevent memory leak in rtl_usb_probeNavid Emamdoost
In rtl_usb_probe if allocation for usb_data fails the allocated hw should be released. In addition the allocated rtlpriv->usb_data should be released on error handling path. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-03rtlwifi: fix non-kerneldoc comment in usb.cValdis Klētnieks
Fix spurious warning message when building with W=1: CC [M] drivers/net/wireless/realtek/rtlwifi/usb.o drivers/net/wireless/realtek/rtlwifi/usb.c:243: warning: Cannot understand * on line 243 - I thought it was a doc line drivers/net/wireless/realtek/rtlwifi/usb.c:760: warning: Cannot understand * on line 760 - I thought it was a doc line drivers/net/wireless/realtek/rtlwifi/usb.c:790: warning: Cannot understand * on line 790 - I thought it was a doc line Clean up the comment format. Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-25rtlwifi: rtl8192cu: fix error handle when usb probe failedPing-Ke Shih
rtl_usb_probe() must do error handle rtl_deinit_core() only if rtl_init_core() is done, otherwise goto error_out2. | usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 | rtl_usb: reg 0xf0, usbctrl_vendorreq TimeOut! status:0xffffffb9 value=0x0 | rtl8192cu: Chip version 0x10 | rtl_usb: reg 0xa, usbctrl_vendorreq TimeOut! status:0xffffffb9 value=0x0 | rtl_usb: Too few input end points found | INFO: trying to register non-static key. | the code is fine but needs lockdep annotation. | turning off the locking correctness validator. | CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.1.0-rc4-319354-g9a33b36 #3 | Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS | Google 01/01/2011 | Workqueue: usb_hub_wq hub_event | Call Trace: | __dump_stack lib/dump_stack.c:77 [inline] | dump_stack+0xe8/0x16e lib/dump_stack.c:113 | assign_lock_key kernel/locking/lockdep.c:786 [inline] | register_lock_class+0x11b8/0x1250 kernel/locking/lockdep.c:1095 | __lock_acquire+0xfb/0x37c0 kernel/locking/lockdep.c:3582 | lock_acquire+0x10d/0x2f0 kernel/locking/lockdep.c:4211 | __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] | _raw_spin_lock_irqsave+0x44/0x60 kernel/locking/spinlock.c:152 | rtl_c2hcmd_launcher+0xd1/0x390 | drivers/net/wireless/realtek/rtlwifi/base.c:2344 | rtl_deinit_core+0x25/0x2d0 drivers/net/wireless/realtek/rtlwifi/base.c:574 | rtl_usb_probe.cold+0x861/0xa70 | drivers/net/wireless/realtek/rtlwifi/usb.c:1093 | usb_probe_interface+0x31d/0x820 drivers/usb/core/driver.c:361 | really_probe+0x2da/0xb10 drivers/base/dd.c:509 | driver_probe_device+0x21d/0x350 drivers/base/dd.c:671 | __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778 | bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454 | __device_attach+0x223/0x3a0 drivers/base/dd.c:844 | bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514 | device_add+0xad2/0x16e0 drivers/base/core.c:2106 | usb_set_configuration+0xdf7/0x1740 drivers/usb/core/message.c:2021 | generic_probe+0xa2/0xda drivers/usb/core/generic.c:210 | usb_probe_device+0xc0/0x150 drivers/usb/core/driver.c:266 | really_probe+0x2da/0xb10 drivers/base/dd.c:509 | driver_probe_device+0x21d/0x350 drivers/base/dd.c:671 | __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778 | bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454 | __device_attach+0x223/0x3a0 drivers/base/dd.c:844 | bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514 | device_add+0xad2/0x16e0 drivers/base/core.c:2106 | usb_new_device.cold+0x537/0xccf drivers/usb/core/hub.c:2534 | hub_port_connect drivers/usb/core/hub.c:5089 [inline] | hub_port_connect_change drivers/usb/core/hub.c:5204 [inline] | port_event drivers/usb/core/hub.c:5350 [inline] | hub_event+0x138e/0x3b00 drivers/usb/core/hub.c:5432 | process_one_work+0x90f/0x1580 kernel/workqueue.c:2269 | worker_thread+0x9b/0xe20 kernel/workqueue.c:2415 | kthread+0x313/0x420 kernel/kthread.c:253 | ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 Reported-by: syzbot+1fcc5ef45175fc774231@syzkaller.appspotmail.com Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28rtlwifi: Fix all blank line irregularities in main code filesLarry Finger
The types of problems fixed are as follows: WARNING: Missing a blank line after declarations CHECK: Please use a blank line after function/struct/union/enum declarations CHECK: Please don't use multiple blank lines There are no code changes. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-19rtlwifi: Remove CamelCase variables from base codeLarry Finger
There are a number of CamelCase variables remaining in the source files of modules rtl_pci, rtl_usb, and rtlwifi. The following checkpatch excettions are also fixed: for_kalle1/0001-rtlwifi-Remove-CamelCase-variables-from-base-code.patch ----------------------------------------------------------------------- CHECK: Unnecessary parentheses around 'rtlefuse->efuse_map[EFUSE_INIT_MAP][base + i] != rtlefuse->efuse_map[EFUSE_MODIFY_MAP][base + i]' #68: FILE: drivers/net/wireless/realtek/rtlwifi/efuse.c:377: + if ((rtlefuse->efuse_map[EFUSE_INIT_MAP][base + i] != + rtlefuse->efuse_map[EFUSE_MODIFY_MAP][base + i]) || + (rtlefuse->efuse_map[EFUSE_INIT_MAP][base + i + 1] != + rtlefuse->efuse_map[EFUSE_MODIFY_MAP][base + i + 1])) { CHECK: Unnecessary parentheses around 'rtlefuse->efuse_map[EFUSE_INIT_MAP][base + i + 1] != rtlefuse->efuse_map[EFUSE_MODIFY_MAP][base + i + 1]' #68: FILE: drivers/net/wireless/realtek/rtlwifi/efuse.c:377: + if ((rtlefuse->efuse_map[EFUSE_INIT_MAP][base + i] != + rtlefuse->efuse_map[EFUSE_MODIFY_MAP][base + i]) || + (rtlefuse->efuse_map[EFUSE_INIT_MAP][base + i + 1] != + rtlefuse->efuse_map[EFUSE_MODIFY_MAP][base + i + 1])) { WARNING: line over 80 characters #70: FILE: drivers/net/wireless/realtek/rtlwifi/efuse.c:379: + (rtlefuse->efuse_map[EFUSE_INIT_MAP][base + i + 1] != CHECK: No space is necessary after a cast #186: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8188ee/trx.c:396: + status->rx_is40mhzpacket = (bool) GET_RX_DESC_BW(pdesc); CHECK: No space is necessary after a cast #208: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8192ce/trx.c:335: + stats->rx_is40mhzpacket = (bool) GET_RX_DESC_BW(pdesc); CHECK: No space is necessary after a cast #243: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c:301: + stats->rx_is40mhzpacket = (bool) GET_RX_DESC_BW(pdesc); CHECK: No space is necessary after a cast #252: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c:368: + stats.rx_is40mhzpacket = (bool) GET_RX_DESC_BW(rxdesc); CHECK: No space is necessary after a cast #265: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8192de/trx.c:475: + stats->rx_is40mhzpacket = (bool) GET_RX_DESC_BW(pdesc); WARNING: Unnecessary space before function pointer arguments #455: FILE: drivers/net/wireless/realtek/rtlwifi/wifi.h:1462: + void (*writen_sync) (struct rtl_priv *rtlpriv, u32 addr, void *buf, WARNING: Unnecessary space before function pointer arguments #483: FILE: drivers/net/wireless/realtek/rtlwifi/wifi.h:2257: + void (*fill_fake_txdesc) (struct ieee80211_hw *hw, u8 *pdesc, Note that not all checkpatch exceptions are addressed. Those will be handled in later patches. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-19rtlwifi: Replace old-style license informationLarry Finger
The traditional license information is replaced by the SPDX form. There are no code changes. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-06-24rtlwifi: Fix kernel Oops "Fw download fail!!"Ping-Ke Shih
When connecting to AP, mac80211 asks driver to enter and leave PS quickly, but driver deinit doesn't wait for delayed work complete when entering PS, then driver reinit procedure and delay work are running simultaneously. This will cause unpredictable kernel oops or crash like rtl8723be: error H2C cmd because of Fw download fail!!! WARNING: CPU: 3 PID: 159 at drivers/net/wireless/realtek/rtlwifi/ rtl8723be/fw.c:227 rtl8723be_fill_h2c_cmd+0x182/0x510 [rtl8723be] CPU: 3 PID: 159 Comm: kworker/3:2 Tainted: G O 4.16.13-2-ARCH #1 Hardware name: ASUSTeK COMPUTER INC. X556UF/X556UF, BIOS X556UF.406 10/21/2016 Workqueue: rtl8723be_pci rtl_c2hcmd_wq_callback [rtlwifi] RIP: 0010:rtl8723be_fill_h2c_cmd+0x182/0x510 [rtl8723be] RSP: 0018:ffffa6ab01e1bd70 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffa26069071520 RCX: 0000000000000001 RDX: 0000000080000001 RSI: ffffffff8be70e9c RDI: 00000000ffffffff RBP: 0000000000000000 R08: 0000000000000048 R09: 0000000000000348 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 R13: ffffa26069071520 R14: 0000000000000000 R15: ffffa2607d205f70 FS: 0000000000000000(0000) GS:ffffa26081d80000(0000) knlGS:000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000443b39d3000 CR3: 000000037700a005 CR4: 00000000003606e0 Call Trace: ? halbtc_send_bt_mp_operation.constprop.17+0xd5/0xe0 [btcoexist] ? ex_btc8723b1ant_bt_info_notify+0x3b8/0x820 [btcoexist] ? rtl_c2hcmd_launcher+0xab/0x110 [rtlwifi] ? process_one_work+0x1d1/0x3b0 ? worker_thread+0x2b/0x3d0 ? process_one_work+0x3b0/0x3b0 ? kthread+0x112/0x130 ? kthread_create_on_node+0x60/0x60 ? ret_from_fork+0x35/0x40 Code: 00 76 b4 e9 e2 fe ff ff 4c 89 ee 4c 89 e7 e8 56 22 86 ca e9 5e ... This patch ensures all delayed works done before entering PS to satisfy our expectation, so use cancel_delayed_work_sync() instead. An exception is delayed work ips_nic_off_wq because running task may be itself, so add a parameter ips_wq to deinit function to handle this case. This issue is reported and fixed in below threads: https://github.com/lwfinger/rtlwifi_new/issues/367 https://github.com/lwfinger/rtlwifi_new/issues/366 Tested-by: Evgeny Kapun <abacabadabacaba@gmail.com> # 8723DE Tested-by: Shivam Kakkar <shivam543@gmail.com> # 8723BE on 4.18-rc1 Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Fixes: cceb0a597320 ("rtlwifi: Add work queue for c2h cmd.") Cc: Stable <stable@vger.kernel.org> # 4.11+ Reviewed-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-01-17rtlwifi: Use mutex to replace spin_lock to protect IPS and LPSPing-Ke Shih
Enter/leavel IPS and LPS are large critical section, and they can't use sleep function because running in atomic-context, which own a spin_lock. In commit ba9f93f82aba ("rtlwifi: Fix enter/exit power_save"), it moves LPS functions to thread-context, so this commit can simply change LPS's spin lock to mutex. Considering IPS functions, rtl_ips_nic_on() may be called by TX tasklet (softirq-context) that check whether packet is auth frame. Fortunately, current mac80211 will ask driver to leave IPS using op_config with changed flag IEEE80211_CONF_CHANGE_IDLE, before issuing auth frame, so IPS functions can run in thread-context and use mutex to protect critical section, too. Also, this commit removes some useless spin locks. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-27rtlwifi: Remove seq_number from rtl_tid_dataPing-Ke Shih
Since mac80211 maintains the sequence number for each STA/TID, driver doesn't need to maintain a copy. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-16networking: introduce and use skb_put_data()Johannes Berg
A common pattern with skb_put() is to just want to memcpy() some data into the new space, introduce skb_put_data() for this. An spatch similar to the one for skb_put_zero() converts many of the places using it: @@ identifier p, p2; expression len, skb, data; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_data(skb, data, len); | -p = (t)skb_put(skb, len); +p = skb_put_data(skb, data, len); ) ( p2 = (t2)p; -memcpy(p2, data, len); | -memcpy(p, data, len); ) @@ type t, t2; identifier p, p2; expression skb, data; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); ) ( p2 = (t2)p; -memcpy(p2, data, sizeof(*p)); | -memcpy(p, data, sizeof(*p)); ) @@ expression skb, len, data; @@ -memcpy(skb_put(skb, len), data, len); +skb_put_data(skb, data, len); (again, manually post-processed to retain some comments) Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-01Merge tag 'wireless-drivers-next-for-davem-2017-02-01' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.11 It's nice to see rt2x00 development has becoming active, for example adding support for a new chip version. Also wcn36xx has been converted to use the recently merged QCOM_SMD subsystem. Otherwise new features and fixes it lots of drivers. Major changes: iwlwifi * some more work in preparation for A000 family support * add support for radiotap timestamps * some work on our firmware debugging capabilities wcn36xx * convert to a proper QCOM_SMD driver (from the platform_driver interface) ath10k * VHT160 support * dump Copy Engine registers during firmware crash * search board file extension from SMBIOS wil6210 * add disable_ap_sme module parameter rt2x00 * support RT3352 with external PA * support for RT3352 with 20MHz crystal * add support for RT5350 WiSoC brcmfmac * add support for BCM43455 sdio device rtl8xxxu * add support for D-Link DWA-131 rev E1, TP-Link TL-WN822N v4 and others ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-28rtlwifi: rtl_usb: Fix for URB leaking when doing ifconfig up/downMichael Schenk
In the function rtl_usb_start we pre-allocate a certain number of urbs for RX path but they will not be freed when calling rtl_usb_stop. This results in leaking urbs when doing ifconfig up and down. Eventually, the system has no available urbs. Signed-off-by: Michael Schenk <michael.schenk@albis-elcon.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-01-20rtlwifi: Convert COMP_XX entries into a proper debugging maskLarry Finger
The debugging macros contain a parameter COMP_XX that could be used as a mask; however, the code turns all these various bits on at the same time. This change implements them as a proper mask, and adds module parameters to set the mask at load time. The current name "debug" for the debug level has been changed to "debug_level" to better differentiate it from "debug_mask". The debug routines have also been changed to interrogate the structure that is loaded at entry time. As a result, the structure rtl_debug is no longer needed, and all references to it are deleted. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-01-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Two AF_* families adding entries to the lockdep tables at the same time. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-30rtlwifi: Remove RT_TRACE messages that use DBG_EMERGLarry Finger
These messages are always logged and represent error conditions, thus we can use pr_err(). Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-12-30rtlwifi: Replace local debug macro RT_ASSERTLarry Finger
This macro can be replaced with WARN_ONCE. In addition to using a standard debugging macro for these critical errors, we also get a stack dump. In rtl8821ae/hw.c, a senseless comment was removed, and an incorrect indentation was fixed. This patch also fixes two places in each of rtl8192ee, rtl8723be, and rtl8821ae where the logical condition was incorrect. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-12-30rtlwifi: rtl_usb: Fix missing entry in USB driver's private dataLarry Finger
These drivers need to be able to reference "struct ieee80211_hw" from the driver's private data, and vice versa. The USB driver failed to store the address of ieee80211_hw in the private data. Although this bug has been present for a long time, it was not exposed until commit ba9f93f82aba ("rtlwifi: Fix enter/exit power_save"). Fixes: ba9f93f82aba ("rtlwifi: Fix enter/exit power_save") Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-17rtlwifi: Remove address of Free Software FoundationLarry Finger
Since this driver was added to the kernel, the checkpatch script was modified to request that the address of the FSF not be included. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-08-13net: wireless: realtek: rtlwifi: usb: don't print error when allocating urb ↵Wolfram Sang
fails kmalloc will print enough information in case of failure. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-11rtlwifi: rtl818x: constify rtl_intf_ops structuresJulia Lawall
The rtl_intf_ops structures are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-11rtlwifi: fix memory leak for USB devicePeter Wu
Free skb for received frames with a wrong checksum. This can happen pretty rapidly, exhausting all memory. This fixes a memleak (detected with kmemleak). Originally found while using monitor mode, but it also appears during managed mode (once the link is up). Cc: stable@vger.kernel.org Signed-off-by: Peter Wu <peter@lekensteyn.nl> ACKed-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-10-14rtlwifi: rtl818x: Move drivers into new realtek directoryLarry Finger
Now that a new mac80211-based driver for Realtek devices has been submitted, it is time to reorganize the directories. Rather than having directories rtlwifi and rtl818x be in drivers/net/wireless/, they will now be in drivers/net/wireless/realtek/. This change simplifies the directory structure, but does not result in any configuration changes that are visable to the user. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit (git 2.34.1) at 2025-05-13 18:56:06 +0000