| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers fixes from Ilpo Järvinen:
"Mostly a few lines fixed here and there except amd/isp4 which improves
swnodes relationships but that is a new driver not in any stable
kernels yet. The think-lmi driver changes also look relatively large
but there are just many fixes to it.
The i2c/piix4 change is a effectively a revert of the commit
7e173eb82ae9 ("i2c: piix4: Make CONFIG_I2C_PIIX4 dependent on
CONFIG_X86") but that required moving the header out from arch/x86
under include/linux/platform_data/
Summary:
- amd/isp4: Improve swnode graph (new driver exception)
- asus-nb-wmi: Use duo keyboard quirk for Zenbook Duo UX8406CA
- dell-lis3lv02d: Add Latitude 5500 accelerometer address
- dell-wmi-sysman: Fix WMI data block retrieval and class dev unreg
- hp-bioscfg: Fix class device unregistration
- i2c: piix4: Re-enable on non-x86 + move FCH header under platform_data/
- intel/hid: Wildcat Lake support
- mellanox:
- mlxbf-pmc: Fix duplicate event ID
- mlxbf-tmfifo: Fix vring_desc.len assignment
- mlxreg-lc: Fix bit-not-set logic check
- nvsw-sn2201: Fix bus number in error message & spelling errors
- portwell-ec: Move watchdog device under correct platform hierarchy
- think-lmi: Error handling fixes (sysfs, kset, kobject, class dev unreg)
- thinkpad_acpi: Handle HKEY 0x1402 event (2025 Thinkpads)
- wmi: Fix WMI event enablement"
* tag 'platform-drivers-x86-v6.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (22 commits)
platform/x86: think-lmi: Fix sysfs group cleanup
platform/x86: think-lmi: Fix kobject cleanup
platform/x86: think-lmi: Create ksets consecutively
platform/mellanox: mlxreg-lc: Fix logic error in power state check
i2c: Re-enable piix4 driver on non-x86
Move FCH header to a location accessible by all archs
platform/x86/intel/hid: Add Wildcat Lake support
platform/x86: dell-wmi-sysman: Fix class device unregistration
platform/x86: think-lmi: Fix class device unregistration
platform/x86: hp-bioscfg: Fix class device unregistration
platform/x86: Update swnode graph for amd isp4
platform/x86: dell-wmi-sysman: Fix WMI data block retrieval in sysfs callbacks
platform/x86: wmi: Update documentation of WCxx/WExx ACPI methods
platform/x86: wmi: Fix WMI event enablement
platform/mellanox: nvsw-sn2201: Fix bus number in adapter error message
platform/mellanox: Fix spelling and comment clarity in Mellanox drivers
platform/mellanox: mlxbf-pmc: Fix duplicate event ID for CACHE_DATA1
platform/x86: thinkpad_acpi: handle HKEY 0x1402 event
platform/x86: asus-nb-wmi: add DMI quirk for ASUS Zenbook Duo UX8406CA
platform/x86: dell-lis3lv02d: Add Latitude 5500
...
|
|
A new header fch.h was created to store registers used by different AMD
drivers. This header was included by i2c-piix4 in
commit 624b0d5696a8 ("i2c: piix4, x86/platform: Move the SB800 PIIX4 FCH
definitions to <asm/amd/fch.h>"). To prevent compile failures on non-x86
archs i2c-piix4 was set to only compile on x86 by commit 7e173eb82ae9717
("i2c: piix4: Make CONFIG_I2C_PIIX4 dependent on CONFIG_X86").
This was not a good decision because loongarch and mips both actually
support i2c-piix4 and set it enabled in the defconfig.
Move the header to a location accessible by all architectures.
Fixes: 624b0d5696a89 ("i2c: piix4, x86/platform: Move the SB800 PIIX4 FCH definitions to <asm/amd/fch.h>")
Suggested-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250610205817.3912944-1-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Existing swnode graph format is specific to sensor device
and is causing conflicts when accessing standard property
variables outside the sensor driver.
To address this issue, enhanced swnode graph format with
dedicated nodes for i2c and isp devices, with sensor node
added as child to i2c node. This approach allows to have
standard property variables (ex: 'clock-frequency') with
values applicable for each of the devices (sensor, i2c and
isp).
ACPI device driver_data handle is also initialized with root
camera swnode to access the property variables in the graph
in isp and i2c drivers.
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250618202958.3934822-1-pratap.nirujogi@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Use adapater->name inplace of adapter->owner->name to fix
build issues when CONFIG_MODULES is not defined.
Fixes: 90b85567e457 ("platform/x86: Add AMD ISP platform config for OV05C10")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/all/04577a46-9add-420c-b181-29bad582026d@infradead.org
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Requires: 942e1aece13e ("i2c: designware: Initialize adapter name only when not set"
Requires: c8dc57916973 ("i2c: amd-isp: Initialize unique adapter name")
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250609155601.1477055-4-pratap.nirujogi@amd.com
|
|
Every other s2idle cycle fails to reach hardware sleep when keyboard
wakeup is enabled. This appears to be an EC bug, but the vendor
refuses to fix it.
It was confirmed that turning off i8042 wakeup avoids ths issue
(albeit keyboard wakeup is disabled). Take the lesser of two evils
and add it to the i8042 quirk list.
Reported-by: Raoul <ein4rth@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220116
Tested-by: Raoul <ein4rth@gmail.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250611203341.3733478-1-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
commit 5b1122fc4995f ("platform/x86/amd/pmf: fix cleanup in
amd_pmf_init_smart_pc()") adjusted the error handling flow to use a ladder
but this isn't actually needed because work is only scheduled in
amd_pmf_start_policy_engine() and with device managed cleanups pointers
for allocations don't need to be freed.
Adjust the error flow to a single call to amd_pmf_deinit_smart_pc() for
the cases that need to clean up.
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20250512211154.2510397-4-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250522003457.1516679-4-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
If any of the tee init fails, pass up the errors and clear the tee_ctx
pointer. This will prevent cleaning up multiple times.
Fixes: ac052d8c08f9d ("platform/x86/amd/pmf: Add PMF TEE interface")
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20250512211154.2510397-3-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250522003457.1516679-3-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
If setting up smart PC fails for any reason then this can lead to
a double free when unloading amd-pmf. This is because dev->buf was
freed but never set to NULL and is again freed in amd_pmf_remove().
To avoid subtle allocation bugs in failures leading to a double free
change all allocations into device managed allocations.
Fixes: 5b1122fc4995f ("platform/x86/amd/pmf: fix cleanup in amd_pmf_init_smart_pc()")
Link: https://lore.kernel.org/r/20250512211154.2510397-2-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250522003457.1516679-2-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Currently hsmp_send_message() uses down_timeout() with a 100ms timeout
to take the semaphore. However __hsmp_send_message(), the content of the
critical section, has a sleep in it. On systems with significantly
delayed scheduling behaviour this may take over 100ms.
Convert this method to down_interruptible(). Leave the error handling
the same as the documentation currently is not specific about what error
is returned.
Previous behaviour: a caller who competes with another caller stuck in
the critical section due to scheduler delays would receive -ETIME.
New behaviour: a caller who competes with another caller stuck in the
critical section due to scheduler delays will complete successfully.
Reviewed-by: Suma Hegde <suma.hegde@amd.com>
Tested-by: Suma Hegde <suma.hegde@amd.com>
Signed-off-by: Jake Hillion <jake@hillion.co.uk>
Link: https://lore.kernel.org/r/20250605-amd-hsmp-v2-2-a811bc3dd74a@hillion.co.uk
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
__hsmp_send_message sleeps between result read attempts and has a
timeout of 100ms. Under extreme load it's possible for these sleeps to
take a long time, exceeding the 100ms. In this case the current code
does not check the register and fails with ETIMEDOUT.
Refactor the loop to ensure there is at least one read of the register
after a sleep of any duration. This removes instances of ETIMEDOUT with
a single caller, even with a misbehaving scheduler. Tested on AMD
Bergamo machines.
Suggested-by: Blaise Sanouillet <linux@blaise.sanouillet.com>
Reviewed-by: Suma Hegde <suma.hegde@amd.com>
Tested-by: Suma Hegde <suma.hegde@amd.com>
Signed-off-by: Jake Hillion <jake@hillion.co.uk>
Link: https://lore.kernel.org/r/20250605-amd-hsmp-v2-1-a811bc3dd74a@hillion.co.uk
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The area of memory that contains the metrics table may contain garbage
when the cycle starts. This normally doesn't matter because the cycle
itself will populate it with valid data, however commit 9f5595d5f03fd
("platform/x86/amd: pmc: Require at least 2.5 seconds between HW sleep
cycles") started to use it during the check() phase. Depending upon
what garbage is in the table it's possible that the system will wait
2.5 seconds for even the first cycle, which will be visible to a user.
To prevent this from happening explicitly clear the table when logging
is started.
Fixes: 9f5595d5f03fd ("platform/x86/amd: pmc: Require at least 2.5 seconds between HW sleep cycles")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250603132412.3555302-1-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers updates from Ilpo Järvinen:
"The changes are mostly business as usual. Besides pdx86 changes, there
are a few power supply changes needed for related pdx86 features, move
of oxpec driver from hwmon (oxp-sensors) to pdx86, and one FW version
warning to hid-asus.
Highlights:
- alienware-wmi-wmax:
- Add HWMON support
- Add ABI and admin-guide documentation
- Expose GPIO debug methods through debug FS
- Support manual fan control and "custom" thermal profile
- amd/hsmp:
- Add sysfs files to show HSMP telemetry
- Report power readings and limits via hwmon
- amd/isp4: Add AMD ISP platform config for OV05C10
- asus-wmi:
- Refactor Ally suspend/resume to work better with older FW
- hid-asus: check ROG Ally MCU version and warn about old FW versions
- dasharo-acpi:
- Add driver for Dasharo devices supporting fans and temperatures
monitoring
- dell-ddv:
- Expose the battery health and manufacture date to userspace
using power supply extensions
- Implement the battery matching algorithm
- dell-pc:
- Improve error propagation
- Use faux device
- int3472:
- Add delays to avoid GPIO regulator spikes
- Add handshake pin support
- Make regulator supply name configurable and allow registering
more than 1 GPIO regulator
- Map mt9m114 powerdown pin to powerenable
- intel/pmc: Add separate SSRAM Telemetry driver
- intel-uncore-freq: Add attributes to show agent types and die ID
- ISST:
- Support SST-TF revision 2 (allows more cores per bucket)
- Support SST-PP revision 2 (fabric 1 frequencies)
- Remove unnecessary SST MSRs restore (the package retains MSRs
despite CPU offlining)
- mellanox: Add support for SN2201, SN4280, SN5610, and SN5640
- mellanox: mlxbf-pmc: Support additional PMC blocks
- oxpec:
- Add OneXFly variants
- Add support for charge limit, charge thresholds, and turbo LED
- Distinguish current X1 variants to avoid unwanted matching to
new variants
- Follow hwmon conventions
- Move from hwmon/oxp-sensors to platform/x86 to match the
enlarged scope
- power supply:
- Add inhibit-charge-awake (needed by oxpec)
- Add additional battery health status values ("blown fuse" and
"cell imbalance") (needed by dell-ddv)
- powerwell-ec: Add driver for Portwell EC supporting GPIO and watchdog
- thinkpad-acpi: Support camera shutter switch hotkey
- tuxedo: Add virtual LampArray for TUXEDO NB04 devices
- tools/power/x86/intel-speed-select:
- Support displaying SST-PP revision 2 fields
- Skip uncore frequency update on newer generations of CPUs
- Miscellaneous cleanups / refactoring / improvements"
* tag 'platform-drivers-x86-v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (112 commits)
thermal/drivers/acerhdf: Constify struct thermal_zone_device_ops
platform/x86/amd/hsmp: fix building with CONFIG_HWMON=m
platform/x86: asus-wmi: fix build without CONFIG_SUSPEND
docs: ABI: Fix "aassociated" to "associated"
platform/x86: Add AMD ISP platform config for OV05C10
Documentation: admin-guide: pm: Add documentation for die_id
platform/x86/intel-uncore-freq: Add attributes to show die_id
platform/x86/intel: power-domains: Add interface to get Linux die ID
Documentation: admin-guide: pm: Add documentation for agent_types
platform/x86/intel-uncore-freq: Add attributes to show agent types
platform/x86/tuxedo: Prevent invalid Kconfig state
platform/x86: dell-ddv: Expose the battery health to userspace
platform/x86: dell-ddv: Expose the battery manufacture date to userspace
platform/x86: dell-ddv: Implement the battery matching algorithm
power: supply: core: Add additional health status values
platform/x86/amd/hsmp: acpi: Add sysfs files to display HSMP telemetry
platform/x86/amd/hsmp: Report power via hwmon sensors
platform/x86/amd/hsmp: Use a single DRIVER_VERSION for all hsmp modules
platform/mellanox: mlxreg-dpu: Fix smatch warnings
platform: mellanox: nvsw-sn2200: Fix .items in nvsw_sn2201_busbar_hotplug
...
|
|
When CONFIG_HWMON is built as a loadable module, the HSMP drivers
cannot be built-in:
ERROR: modpost: "hsmp_create_sensor" [drivers/platform/x86/amd/hsmp/amd_hsmp.ko] undefined!
ERROR: modpost: "hsmp_create_sensor" [drivers/platform/x86/amd/hsmp/hsmp_acpi.ko] undefined!
Enforce that through the usual Kconfig dependnecy trick.
Fixes: 92c025db52bb ("platform/x86/amd/hsmp: Report power via hwmon sensors")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250522144422.2824083-1-arnd@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Pick up build fixes from upstream to make this tree more testable.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
ISP device specific configuration is not available in ACPI. Add
swnode graph to configure the missing device properties for the
OV05C10 camera device supported on amdisp platform.
Add support to create i2c-client dynamically when amdisp i2c
adapter is available.
Co-developed-by: Benjamin Chan <benjamin.chan@amd.com>
Signed-off-by: Benjamin Chan <benjamin.chan@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Link: https://lore.kernel.org/r/20250514215623.522746-1-pratap.nirujogi@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Prepare to resolve conflicts with an upstream series of fixes that conflict
with pending x86 changes:
6f5bf947bab0 Merge tag 'its-for-linus-20250509' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Make frequently fetched telemetry available via sysfs. These parameters
do not fit in hwmon sensor model, hence make them available via sysfs.
Create following sysfs files per acpi device node.
* c0_residency_input
* prochot_status
* smu_fw_version
* protocol_version
* ddr_max_bw(GB/s)
* ddr_utilised_bw_input(GB/s)
* ddr_utilised_bw_perc_input(%)
* mclk_input(MHz)
* fclk_input(MHz)
* clk_fmax(MHz)
* clk_fmin(MHz)
* cclk_freq_limit_input(MHz)
* pwr_current_active_freq_limit(MHz)
* pwr_current_active_freq_limit_source
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250506101542.200811-3-suma.hegde@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Expose power reading and power limits via hwmon power sensors.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Link: https://lore.kernel.org/r/20250506101542.200811-2-suma.hegde@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Use a single DRIVER_VERSION for the plat, hsmp and acpi modules,
as all these modules are connected to a common functionality.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Link: https://lore.kernel.org/r/20250506101542.200811-1-suma.hegde@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
(GX4HRXL)
MECHREVO Wujie 14XA (GX4HRXL) wakes up immediately after s2idle entry.
This happens regardless of whether the laptop is plugged into AC power,
or whether any peripheral is plugged into the laptop.
Similar to commit a55bdad5dfd1 ("platform/x86/amd/pmc: Disable keyboard
wakeup on AMD Framework 13"), the MECHREVO Wujie 14XA wakes up almost
instantly after s2idle suspend entry (IRQ1 is the keyboard):
2025-04-18 17:23:57,588 DEBUG: PM: Triggering wakeup from IRQ 9
2025-04-18 17:23:57,588 DEBUG: PM: Triggering wakeup from IRQ 1
Add this model to the spurious_8042 quirk to workaround this.
This patch does not affect the wake-up function of the built-in keyboard.
Because the firmware of this machine adds an insurance for keyboard
wake-up events, as it always triggers an additional IRQ 9 to wake up the
system.
Suggested-by: Mingcong Bai <jeffbai@aosc.io>
Suggested-by: Xinhui Yang <cyan@cyano.uk>
Suggested-by: Rong Zhang <i@rong.moe>
Fixes: a55bdad5dfd1 ("platform/x86/amd/pmc: Disable keyboard wakeup on AMD Framework 13")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4166
Cc: Mario Limonciello <mario.limonciello@amd.com>
Link: https://zhuanldan.zhihu.com/p/730538041
Tested-by: Yemu Lu <prcups@krgm.moe>
Signed-off-by: Runhua He <hua@aosc.io>
Link: https://lore.kernel.org/r/20250507100103.995395-1-hua@aosc.io
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Conflicts:
tools/arch/x86/include/asm/cpufeatures.h
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
amd_hsmp and hsmp_acpi are intended to be mutually exclusive drivers and
amd_hsmp is for legacy platforms. To achieve this, it is essential to
check for the presence of the ACPI device in plat.c. If the hsmp ACPI
device entry is found, allow the hsmp_acpi driver to manage the hsmp
and return an error from plat.c.
Additionally, rename the driver from amd_hsmp to hsmp_acpi to prevent
"Driver 'amd_hsmp' is already registered, aborting..." error in case
both drivers are loaded simultaneously.
Also, support both platform device based and ACPI based probing for
family 0x1A models 0x00 to 0x0F, implement only ACPI based probing
for family 0x1A, models 0x10 to 0x1F. Return false from
legacy_hsmp_support() for this platform.
This aligns with the condition check in is_f1a_m0h().
Link: https://lore.kernel.org/platform-driver-x86/aALZxvHWmphNL1wa@gourry-fedora-PF4VCD3F/
Fixes: 7d3135d16356 ("platform/x86/amd/hsmp: Create separate ACPI, plat and common drivers")
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Co-developed-by: Gregory Price <gourry@gourry.net>
Signed-off-by: Gregory Price <gourry@gourry.net>
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Link: https://lore.kernel.org/r/20250425102357.266790-1-suma.hegde@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
commit 376a8c2a14439 ("platform/x86/amd/pmf: Update PMF Driver for
Compatibility with new PMF-TA") added support for platforms that support
an updated TA, however it also exposed a number of platforms that although
they have support for the updated TA don't actually populate a policy
binary.
Add an explicit check that the policy binary isn't empty before
initializing the TA.
Reported-by: Christian Heusel <christian@heusel.eu>
Closes: https://lore.kernel.org/platform-driver-x86/ae644428-5bf2-4b30-81ba-0b259ed3449b@heusel.eu/
Fixes: 376a8c2a14439 ("platform/x86/amd/pmf: Update PMF Driver for Compatibility with new PMF-TA")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Christian Heusel <christian@heusel.eu>
Link: https://lore.kernel.org/r/20250423132002.3984997-3-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
If a policy is passed into amd_pmf_get_pb_data() that causes the engine
to fail to start there is a memory leak. Free the memory in this failure
path.
Fixes: 10817f28e5337 ("platform/x86/amd/pmf: Add capability to sideload of policy binary")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250423132002.3984997-2-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The s2idle MMIO quirk uses a scratch register in the FCH.
Adjust the code to clarify that.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Cc: Yazen Ghannam <yazen.ghannam@amd.com>
Cc: platform-driver-x86@vger.kernel.org
Link: https://lore.kernel.org/r/20250422234830.2840784-5-superm1@kernel.org
|
|
When an APU exits HW sleep with no active wake sources the Linux kernel will
rapidly assert that the APU can enter back into HW sleep. This happens in a
few ms. Contrasting this to Windows, Windows can take 10s of seconds to
enter back into the resiliency phase for Modern Standby.
For some situations this can be problematic because it can cause leakage
from VDDCR_SOC to VDD_MISC and force VDD_MISC outside of the electrical
design guide specifications. On some designs this will trip the over
voltage protection feature (OVP) of the voltage regulator module, but it
could cause APU damage as well.
To prevent this risk, add an explicit sleep call so that future attempts
to enter into HW sleep will have enough time to settle. This will occur
while the screen is dark and only on cases that the APU should enter HW
sleep again, so it shouldn't be noticeable to any user.
Cc: stable@vger.kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20250414162446.3853194-1-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Collect AMD specific platform header files in <asm/amd/*.h>.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mario Limonciello <superm1@kernel.org>
Link: https://lore.kernel.org/r/20250413084144.3746608-7-mingo@kernel.org
|
|
Collect AMD specific platform header files in <asm/amd/*.h>.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Carlos Bilbao <carlos.bilbao@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mario Limonciello <superm1@kernel.org>
Cc: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Link: https://lore.kernel.org/r/20250413084144.3746608-5-mingo@kernel.org
|
|
Collect AMD specific platform header files in <asm/amd/*.h>.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mario Limonciello <superm1@kernel.org>
Link: https://lore.kernel.org/r/20250413084144.3746608-4-mingo@kernel.org
|
|
On some platforms it has been observed that STT limits are not being
applied properly causing poor performance as power limits are set too low.
STT limits that are sent to the platform are supposed to be in Q8.8
format. Convert them before sending.
Reported-by: Yijun Shen <Yijun.Shen@dell.com>
Fixes: 7c45534afa443 ("platform/x86/amd/pmf: Add support for PMF Policy Binary")
Cc: stable@vger.kernel.org
Tested-by: Yijun Shen <Yijun_Shen@Dell.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250407181915.1482450-1-superm1@kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers updates from Ilpo Järvinen:
- alienware-wmi:
- Refactor and split WMAX/legacy drivers
- dell-ddv:
- Correct +0.1 offset in temperature
- Use the power supply extension mechanism for battery temperatures
- intel/pmc:
- Refactor init to mostly use a common init function
- Add support for Arrow Lake U/H
- Add support for Panther Lake
- intel/sst:
- Improve multi die handling
- Prefix header search path with sysroot (fixes cross-compiling)
- lenovo-wmi-hotkey-utilities:
- Support for mic & audio mute LEDs
- samsung-galaxybook:
- Add driver for Samsung Galaxy Book series
- wmi:
- Rework WCxx/WExx ACPI method handling
- Enable data block collection when the data block is set
- platform/arm:
- Add Huawei Matebook E Go EC driver
- platform/mellanox:
- Relocate to drivers/platform/mellanox/
- mlxbf-bootctl:
- RTC battery status sysfs support
- Miscellaneous cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (75 commits)
platform/x86: x86-android-tablets: Add select POWER_SUPPLY to Kconfig
platform/x86/amd/pmf: convert timeouts to secs_to_jiffies()
platform/x86: thinkpad_acpi: convert timeouts to secs_to_jiffies()
irqdomain: platform/x86: Switch to irq_domain_create_linear()
platform/x86/amd/pmc: fix leak in probe()
tools/power/x86/intel-speed-select: v1.22 release
tools/power/x86/intel-speed-select: Prefix header search path with sysroot
tools/power/x86/intel-speed-select: Die ID for IO dies
tools/power/x86/intel-speed-select: Fix the condition to check multi die system
tools/power/x86/intel-speed-select: Prevent increasing MAX_DIE_PER_PACKAGE
platform/x86/amd/pmc: Use managed APIs for mutex
platform/x86/amd/pmc: Remove unnecessary line breaks
platform/x86/amd/pmc: Move macros and structures to the PMC header file
platform/x86/amd/pmc: Notify user when platform does not support s0ix transition
platform/x86: dell-ddv: Use the power supply extension mechanism
platform/x86: dell-ddv: Use devm_battery_hook_register
platform/x86: dell-ddv: Fix temperature calculation
platform/x86: thinkpad_acpi: check the return value of devm_mutex_init()
platform/x86: samsung-galaxybook: Fix block_recording not supported logic
platform/x86: dell-uart-backlight: Make dell_uart_bl_serdev_driver static
...
|
|
Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies() to avoid the multiplication
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
@depends on patch@
expression E;
@@
-msecs_to_jiffies
+secs_to_jiffies
(E
- * \( 1000 \| MSEC_PER_SEC \)
)
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/r/20250225-converge-secs-to-jiffies-part-two-v3-14-a43967e36c88@linux.microsoft.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The HSMP interface is just an SMN interface with different offsets.
Define an HSMP wrapper in the SMN code and have the HSMP platform driver
use that rather than a local solution.
Also, remove the "root" member from AMD_NB, since there are no more
users of it.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Carlos Bilbao <carlos.bilbao@kernel.org>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250130-wip-x86-amd-nb-cleanup-v4-1-b5cc997e471b@amd.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
"Fixes and new HW support.
The diff is a bit larger than I'd prefer at this point due to
unwinding the amd/pmf driver's error handling properly instead of
calling a deinit function that was a can full of worms.
Summary:
- amd/pmf:
- Fix error handling in amd_pmf_init_smart_pc()
- Fix missing hidden options for Smart PC
- surface: aggregator_registry: Add Support for Surface Pro 11"
* tag 'platform-drivers-x86-v6.14-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
MAINTAINERS: Update Ike Panhc's email address
platform/x86/amd: pmf: Fix missing hidden options for Smart PC
platform/surface: aggregator_registry: Add Support for Surface Pro 11
platform/x86/amd/pmf: fix cleanup in amd_pmf_init_smart_pc()
|
|
Call pci_dev_put(rdev) before returning.
Fixes: 6ad1b2dc0f2a ("platform/x86/amd/pmc: Use managed APIs for mutex")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/65e2fffb-a1cb-4297-b725-661d6b790a05@stanley.mountain
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
amd_pmf_get_slider_info() checks the current profile to report correct
value to the TA inputs. If hidden options are in use then the wrong
values will be reported to TA.
Add the two compat options PLATFORM_PROFILE_BALANCED_PERFORMANCE and
PLATFORM_PROFILE_QUIET for this use.
Reported-by: Yijun Shen <Yijun.Shen@dell.com>
Fixes: 9a43102daf64d ("platform/x86/amd: pmf: Add balanced-performance to hidden choices")
Fixes: 44e94fece5170 ("platform/x86/amd: pmf: Add 'quiet' to hidden choices")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20250306034402.50478-1-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
There are a few problems in this code:
First, if amd_pmf_tee_init() fails then the function returns directly
instead of cleaning up. We cannot simply do a "goto error;" because
the amd_pmf_tee_init() cleanup calls tee_shm_free(dev->fw_shm_pool);
and amd_pmf_tee_deinit() calls it as well leading to a double free.
I have re-written this code to use an unwind ladder to free the
allocations.
Second, if amd_pmf_start_policy_engine() fails on every iteration though
the loop then the code calls amd_pmf_tee_deinit() twice which is also a
double free. Call amd_pmf_tee_deinit() inside the loop for each failed
iteration. Also on that path the error codes are not necessarily
negative kernel error codes. Set the error code to -EINVAL.
There is a very subtle third bug which is that if the call to
input_register_device() in amd_pmf_register_input_device() fails then
we call input_unregister_device() on an input device that wasn't
registered. This will lead to a reference counting underflow
because of the device_del(&dev->dev) in __input_unregister_device().
It's unlikely that anyone would ever hit this bug in real life.
Fixes: 376a8c2a1443 ("platform/x86/amd/pmf: Update PMF Driver for Compatibility with new PMF-TA")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/232231fc-6a71-495e-971b-be2a76f6db4c@stanley.mountain
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Restore the previous behavior of the ACPI platform_profile sysfs
interface that has been changed recently in a way incompatible with
the existing user space (Mario Limonciello)"
* tag 'acpi-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
platform/x86/amd: pmf: Add balanced-performance to hidden choices
platform/x86/amd: pmf: Add 'quiet' to hidden choices
ACPI: platform_profile: Add support for hidden choices
|
|
Adopt managed devm_* APIs for handling mutex creation and deletion,
facilitating automatic resource cleanup.
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20250305142615.410178-4-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Enhance code readability by fixing line break and blank line
inconsistencies.
Also make the return variable "rc" as function level local.
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20250305142615.410178-3-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
To improve the code organization and readability, move the macros and
structures from the AMD PMC driver to the PMC header file.
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20250305142615.410178-2-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Some of the AMD platforms do not support modern standby, so when such
CPU ID is detected, a warning message will be displayed to the user.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20250305142615.410178-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The PMF driver allocates a shared memory buffer using
tee_shm_alloc_kernel_buf() for communication with the PMF-TA.
The latest PMF-TA version introduces new structures with OEM debug
information and additional policy input conditions for evaluating the
policy binary. Consequently, the shared memory size must be increased to
ensure compatibility between the PMF driver and the updated PMF-TA.
To do so, introduce the new PMF-TA UUID and update the PMF shared memory
configuration to ensure compatibility with the latest PMF-TA version.
Additionally, export the TA UUID.
These updates will result in modifications to the prototypes of
amd_pmf_tee_init() and amd_pmf_ta_open_session().
Link: https://lore.kernel.org/all/55ac865f-b1c7-fa81-51c4-d211c7963e7e@linux.intel.com/
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20250305045842.4117767-2-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
In the amd_pmf_invoke_cmd_init() function within the PMF driver ensure
that the actual result from the PMF-TA is returned rather than a generic
EIO. This change allows for proper handling of errors originating from the
PMF-TA.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20250305045842.4117767-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Acer's WMI driver uses balanced-performance but AMD-PMF doesn't.
In case a machine binds with both drivers let amd-pmf use
balanced-performance as well.
Fixes: 688834743d67 ("ACPI: platform_profile: Allow multiple handlers")
Suggested-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Antheas Kapenekakis <lkml@antheas.dev>
Tested-by: Derek J. Clark <derekjohn.clark@gmail.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20250228170155.2623386-4-superm1@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When amd-pmf and asus-wmi are both bound no low power option shows
up in sysfs. Add a hidden choice for amd-pmf to support 'quiet' mode
to let both bind.
Fixes: 688834743d67 ("ACPI: platform_profile: Allow multiple handlers")
Suggested-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Antheas Kapenekakis <lkml@antheas.dev>
Tested-by: Derek J. Clark <derekjohn.clark@gmail.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20250228170155.2623386-3-superm1@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
`cb_mutex` was introduced in commit 9e0894d07072e ("platform/x86/amd/pmf:
Enable Custom BIOS Inputs for PMF-TA") to prevent conccurrent access for
BIOS inputs. It however isn't initialized and so on use it may lead to
a NULL pointer dereference.
Add code to initialize on probe and clean up on destroy.
Reported-by: Yijun Shen <Yijun.Shen@dell.com>
Cc: Richard Gong <richgong@amd.com>
Fixes: 9e0894d07072e ("platform/x86/amd/pmf: Enable Custom BIOS Inputs for PMF-TA")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-By: Yijun Shen <Yijun_Shen@Dell.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20250227170308.435862-1-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The `objs` suffix is reserved for user-space tools. Use the `y` suffix
instead, which is usually used for kernel drivers.
While at it, fix alignment in AMD PMC and PMF Makefiles.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250218194113.26589-3-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
"acer-wmi:
- Add support for PH14-51, PH16-72, and Nitro AN515-58
- Add proper hwmon support
- Improve error handling when reading "gaming system info"
- Replace direct EC reads for the current platform profile with WMI
calls to handle EC address variations
- Replace custom platform_profile cycling with the generic one
ACPI:
- platform_profile: Major refactoring and improvements
- Support registering multiple platform_profile handlers concurrently
to avoid the need to quirk which handler takes precedence
- Support reporting "custom" profile for cases where the current
profile is ambiguous or when settings tweaks are done outside the
pre-defined profile
- Abstract and layer platform_profile API better using the class_dev
and drvdata
- Various minor improvements
- Add Documentation and kerneldoc
amd/hsmp:
- Add support for HSMP protocol v7
amd/pmc:
- Support AMD 1Ah family 70h
- Support STB with Ryzen desktop SoCs
amd/pmf:
- Support Custom BIOS inputs for PMF TA
- Support passing SRA sensor data from AMD SFH (HID) to PMF TA
dell-smo8800:
- Move SMO88xx quirk away from the generic i2c-i801 driver
- Add accelerometer support for Dell Latitude E6330/E6430 and XPS
9550
- Support probing accelerometer for models yet to be listed in the
DMI mapping table because ACPI lacks i2c-address for the
accelerometer (behind a module parameter because probing might be
dangerous)
HID:
- amd_sfh: Add support for exporting SRA sensor data
hp-wmi:
- Add fan and thermal support for Victus 16-s1000
input:
- Add key for phone linking
- i8042: Add context for the i8042 filter to enable cleaning up the
filter related global variables from pdx86 drivers
lenovo-wmi-camera:
- Use SW_CAMERA_LENS_COVER instead of KEY_CAMERA_ACCESS
mellanox mlxbf-pmc:
- Add support for monitoring cycle count
- Add Documentation
thinkpad_acpi:
- Add support for phone link key
tools/power/x86/intel-speed-select:
- Fix Turbo Ratio Limit restore
x86-android-tables:
- Add support for Vexia EDU ATLA 10 Bluetooth and EC battery driver
And miscellaneous cleanups / refactoring / improvements"
* tag 'platform-drivers-x86-v6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (133 commits)
platform/x86: acer-wmi: Fix initialization of last_non_turbo_profile
platform/x86: acer-wmi: Ignore AC events
platform/mellanox: mlxreg-io: use sysfs_emit() instead of sprintf()
platform/mellanox: mlxreg-hotplug: use sysfs_emit() instead of sprintf()
platform/mellanox: mlxbf-bootctl: use sysfs_emit() instead of sprintf()
platform/x86: hp-wmi: Add fan and thermal profile support for Victus 16-s1000
ACPI: platform_profile: Add a prefix to log messages
ACPI: platform_profile: Add documentation
ACPI: platform_profile: Clean platform_profile_handler
ACPI: platform_profile: Move platform_profile_handler
ACPI: platform_profile: Remove platform_profile_handler from exported symbols
platform/x86: thinkpad_acpi: Use devm_platform_profile_register()
platform/x86: inspur_platform_profile: Use devm_platform_profile_register()
platform/x86: hp-wmi: Use devm_platform_profile_register()
platform/x86: ideapad-laptop: Use devm_platform_profile_register()
platform/x86: dell-pc: Use devm_platform_profile_register()
platform/x86: asus-wmi: Use devm_platform_profile_register()
platform/x86: amd: pmf: sps: Use devm_platform_profile_register()
platform/x86: acer-wmi: Use devm_platform_profile_register()
platform/surface: surface_platform_profile: Use devm_platform_profile_register()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 updates from Borislav Petkov:
- The first part of a restructuring of AMD's representation of a
northbridge which is legacy now, and the creation of the new AMD node
concept which represents the Zen architecture of having a collection
of I/O devices within an SoC. Those nodes comprise the so-called data
fabric on Zen.
This has at least one practical advantage of not having to add a PCI
ID each time a new data fabric PCI device releases. Eventually, the
lot more uniform provider of data fabric functionality amd_node.c
will be used by all the drivers which need it
- Smaller cleanups
* tag 'x86_misc_for_v6.14_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/amd_node: Use defines for SMN register offsets
x86/amd_node: Remove dependency on AMD_NB
x86/amd_node: Update __amd_smn_rw() error paths
x86/amd_nb: Move SMN access code to a new amd_node driver
x86/amd_nb, hwmon: (k10temp): Simplify amd_pci_dev_to_node_id()
x86/amd_nb: Simplify function 3 search
x86/amd_nb: Use topology info to get AMD node count
x86/amd_nb: Simplify root device search
x86/amd_nb: Simplify function 4 search
x86: Start moving AMD node functionality out of AMD_NB
x86/amd_nb: Clean up early_is_amd_nb()
x86/amd_nb: Restrict init function to AMD-based systems
x86/mtrr: Rename mtrr_overwrite_state() to guest_force_mtrr_state()
|
