| Age | Commit message (Collapse) | Author |
|---|
|
The function mse102x_rx_pkt_spi is used in two cases:
* initial polling to re-arm RX interrupt
* level based RX interrupt handler
Both of them doesn't need an open-coded retry mechanism.
In the first case the function can be called again, if the return code
is IRQ_NONE. This keeps the error behavior during netdev open.
In the second case the proper retry would be handled implicit by
the SPI interrupt. So drop the retry code and simplify the receive path.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://patch.msgid.link/20250509120435.43646-7-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The MSE102x doesn't provide any interrupt register, so the only way
to handle the level interrupt is to fetch the whole packet from
the MSE102x internal buffer via SPI. So in cases the interrupt
handler fails to do this, it should return IRQ_NONE. This allows
the core to disable the interrupt in case the issue persists
and prevent an interrupt storm.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://patch.msgid.link/20250509120435.43646-6-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After removal of the invalid command counter only a relevant debug
message is left, which can be cumbersome. So add a new flag to debugfs,
which indicates whether the driver has ever received a valid CMD.
This helps to differentiate between general and temporary receive
issues.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250509120435.43646-5-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are several reasons for an invalid command response
by the MSE102x:
* SPI line interferences
* MSE102x is in reset or has no firmware
* MSE102x is busy
* no packet in MSE102x receive buffer
So the counter for invalid command isn't very helpful without
further context. So drop the confusing statistics counter,
but keep the debug messages about "unexpected response" in order
to debug possible hardware issues.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250509120435.43646-4-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The example of the initial DT binding of the Vertexcom MSE 102x suggested
a IRQ_TYPE_EDGE_RISING, which is wrong. So warn everyone to fix their
device tree to level based IRQ.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250509120435.43646-3-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In case the CMD_RTS got corrupted by interferences, the MSE102x
doesn't allow a retransmission of the command. Instead the Ethernet
frame must be shifted out of the SPI FIFO. Since the actual length is
unknown, assume the maximum possible value.
Fixes: 2f207cbf0dd4 ("net: vertexcom: Add MSE102x SPI support")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250430133043.7722-5-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since there is no protection in the SPI protocol against electrical
interferences, the driver shouldn't blindly trust the length payload
of CMD_RTS. So introduce a bounds check for incoming frames.
Fixes: 2f207cbf0dd4 ("net: vertexcom: Add MSE102x SPI support")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250430133043.7722-4-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The LEN_MASK for CMD_RTS doesn't cover the whole parameter mask.
The Bit 11 is reserved, so adjust LEN_MASK accordingly.
Fixes: 2f207cbf0dd4 ("net: vertexcom: Add MSE102x SPI support")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250430133043.7722-3-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The MSE102x doesn't provide any SPI commands for interrupt handling.
So in case the interrupt fired before the driver requests the IRQ,
the interrupt will never fire again. In order to fix this always poll
for pending packets after opening the interface.
Fixes: 2f207cbf0dd4 ("net: vertexcom: Add MSE102x SPI support")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250430133043.7722-2-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The tx_bytes should consider the actual size of the Ethernet frames
without the SPI encapsulation. But we still need to take care of
Ethernet padding.
Fixes: 2f207cbf0dd4 ("net: vertexcom: Add MSE102x SPI support")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://patch.msgid.link/20241108114343.6174-3-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The scope of the TX skb is wider than just mse102x_tx_frame_spi(),
so in case the TX skb room needs to be expanded, we should free the
the temporary skb instead of the original skb. Otherwise the original
TX skb pointer would be freed again in mse102x_tx_work(), which leads
to crashes:
Internal error: Oops: 0000000096000004 [#2] PREEMPT SMP
CPU: 0 PID: 712 Comm: kworker/0:1 Tainted: G D 6.6.23
Hardware name: chargebyte Charge SOM DC-ONE (DT)
Workqueue: events mse102x_tx_work [mse102x]
pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : skb_release_data+0xb8/0x1d8
lr : skb_release_data+0x1ac/0x1d8
sp : ffff8000819a3cc0
x29: ffff8000819a3cc0 x28: ffff0000046daa60 x27: ffff0000057f2dc0
x26: ffff000005386c00 x25: 0000000000000002 x24: 00000000ffffffff
x23: 0000000000000000 x22: 0000000000000001 x21: ffff0000057f2e50
x20: 0000000000000006 x19: 0000000000000000 x18: ffff00003fdacfcc
x17: e69ad452d0c49def x16: 84a005feff870102 x15: 0000000000000000
x14: 000000000000024a x13: 0000000000000002 x12: 0000000000000000
x11: 0000000000000400 x10: 0000000000000930 x9 : ffff00003fd913e8
x8 : fffffc00001bc008
x7 : 0000000000000000 x6 : 0000000000000008
x5 : ffff00003fd91340 x4 : 0000000000000000 x3 : 0000000000000009
x2 : 00000000fffffffe x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
skb_release_data+0xb8/0x1d8
kfree_skb_reason+0x48/0xb0
mse102x_tx_work+0x164/0x35c [mse102x]
process_one_work+0x138/0x260
worker_thread+0x32c/0x438
kthread+0x118/0x11c
ret_from_fork+0x10/0x20
Code: aa1303e0 97fffab6 72001c1f 54000141 (f9400660)
Cc: stable@vger.kernel.org
Fixes: 2f207cbf0dd4 ("net: vertexcom: Add MSE102x SPI support")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://patch.msgid.link/20241105163101.33216-1-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is already a define for minimum Ethernet frame length without FCS.
So used this instead of the magic number.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240827191000.3244-6-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This message is a leftover from initial development. It's
unnecessary now and can be dropped.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240827191000.3244-5-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
At the time of MAC address assignment the netdev is not registered yet,
so netdev log functions won't work as expected. While we are at this
downgrade the log level to a warning, because a random MAC address is
not a real error.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240827191000.3244-4-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As long as the MSE102x is not operational, every packet transmission
will run into a TX timeout and flood the kernel log. So log only the
first TX timeout and a user is at least informed about this issue.
The amount of timeouts are still available via netstat.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240827191000.3244-3-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This macro has the advantage over SET_SYSTEM_SLEEP_PM_OPS that we don't
have to care about when the functions are actually used.
Also make use of pm_sleep_ptr() to discard all PM_SLEEP related
stuff if CONFIG_PM_SLEEP isn't enabled.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240827191000.3244-2-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In commit 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"")
some functions and struct members were renamed. To not break all drivers
compatibility macros were provided.
To be able to remove these compatibility macros push the renaming into
this driver.
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/feacee68c00f6f976c82864ba2f10a3f0c1b99f2.1707324794.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
SPI devices use the spi_device_id for module autoloading even on
systems using device tree, after commit 5fa6863ba692 ("spi: Check
we have a spi_device_id for each DT compatible"), kernel warns as
follows since the spi_device_id is missing:
SPI driver mse102x has no spi_device_id for vertexcom,mse1021
SPI driver mse102x has no spi_device_id for vertexcom,mse1022
Add spi_device_id entries to silence the warnings, and ensure driver
module autoloading works.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20220922065717.1448498-1-weiyongjun@huaweicloud.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
in-tech smart charging is now chargebyte. So update the email address
accordingly.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/20220815080626.9688-2-stefan.wahren@i2se.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since commit
baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.")
the function netif_rx() can be used in preemptible/thread context as
well as in interrupt context.
Use netif_rx().
Cc: Łukasz Stelmach <l.stelmach@samsung.com>
Cc: Horatiu Vultur <horatiu.vultur@microchip.com>
Cc: UNGLinuxDriver@microchip.com
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The value returned by an spi driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)
So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Claudius Heine <ch@denx.de>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Acked-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Acked-by: Łukasz Stelmach <l.stelmach@samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220123175201.34839-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This reverts commit 6bf950a8ff72920340dfdec93c18bd3f5f35de6a.
To align with other vendors, NET_VENDOR configs are supposed to be ON by
default, while their drivers should default to OFF.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20220110205246.66298-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Sorry for being rude but new vendors/drivers are supposed to be disabled
by default, otherwise we will have to manually keep track of all vendors
we are not interested in building.
Fixes: 2f207cbf0dd4 ("net: vertexcom: Add MSE102x SPI support")
CC: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Eliminate the following coccicheck warning:
./drivers/net/ethernet/vertexcom/mse102x.c:414:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20211216015433.83383-1-yang.lee@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This implements an SPI protocol driver for Vertexcom MSE102x
Homeplug GreenPHY chip.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
