Age | Commit message (Collapse) | Author |
|
A new header fch.h was created to store registers used by different AMD
drivers. This header was included by i2c-piix4 in
commit 624b0d5696a8 ("i2c: piix4, x86/platform: Move the SB800 PIIX4 FCH
definitions to <asm/amd/fch.h>"). To prevent compile failures on non-x86
archs i2c-piix4 was set to only compile on x86 by commit 7e173eb82ae9717
("i2c: piix4: Make CONFIG_I2C_PIIX4 dependent on CONFIG_X86").
This was not a good decision because loongarch and mips both actually
support i2c-piix4 and set it enabled in the defconfig.
Move the header to a location accessible by all architectures.
Fixes: 624b0d5696a89 ("i2c: piix4, x86/platform: Move the SB800 PIIX4 FCH definitions to <asm/amd/fch.h>")
Suggested-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250610205817.3912944-1-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Every other s2idle cycle fails to reach hardware sleep when keyboard
wakeup is enabled. This appears to be an EC bug, but the vendor
refuses to fix it.
It was confirmed that turning off i8042 wakeup avoids ths issue
(albeit keyboard wakeup is disabled). Take the lesser of two evils
and add it to the i8042 quirk list.
Reported-by: Raoul <ein4rth@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220116
Tested-by: Raoul <ein4rth@gmail.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250611203341.3733478-1-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The area of memory that contains the metrics table may contain garbage
when the cycle starts. This normally doesn't matter because the cycle
itself will populate it with valid data, however commit 9f5595d5f03fd
("platform/x86/amd: pmc: Require at least 2.5 seconds between HW sleep
cycles") started to use it during the check() phase. Depending upon
what garbage is in the table it's possible that the system will wait
2.5 seconds for even the first cycle, which will be visible to a user.
To prevent this from happening explicitly clear the table when logging
is started.
Fixes: 9f5595d5f03fd ("platform/x86/amd: pmc: Require at least 2.5 seconds between HW sleep cycles")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250603132412.3555302-1-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Pick up build fixes from upstream to make this tree more testable.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Prepare to resolve conflicts with an upstream series of fixes that conflict
with pending x86 changes:
6f5bf947bab0 Merge tag 'its-for-linus-20250509' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
(GX4HRXL)
MECHREVO Wujie 14XA (GX4HRXL) wakes up immediately after s2idle entry.
This happens regardless of whether the laptop is plugged into AC power,
or whether any peripheral is plugged into the laptop.
Similar to commit a55bdad5dfd1 ("platform/x86/amd/pmc: Disable keyboard
wakeup on AMD Framework 13"), the MECHREVO Wujie 14XA wakes up almost
instantly after s2idle suspend entry (IRQ1 is the keyboard):
2025-04-18 17:23:57,588 DEBUG: PM: Triggering wakeup from IRQ 9
2025-04-18 17:23:57,588 DEBUG: PM: Triggering wakeup from IRQ 1
Add this model to the spurious_8042 quirk to workaround this.
This patch does not affect the wake-up function of the built-in keyboard.
Because the firmware of this machine adds an insurance for keyboard
wake-up events, as it always triggers an additional IRQ 9 to wake up the
system.
Suggested-by: Mingcong Bai <jeffbai@aosc.io>
Suggested-by: Xinhui Yang <cyan@cyano.uk>
Suggested-by: Rong Zhang <i@rong.moe>
Fixes: a55bdad5dfd1 ("platform/x86/amd/pmc: Disable keyboard wakeup on AMD Framework 13")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4166
Cc: Mario Limonciello <mario.limonciello@amd.com>
Link: https://zhuanldan.zhihu.com/p/730538041
Tested-by: Yemu Lu <prcups@krgm.moe>
Signed-off-by: Runhua He <hua@aosc.io>
Link: https://lore.kernel.org/r/20250507100103.995395-1-hua@aosc.io
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Conflicts:
tools/arch/x86/include/asm/cpufeatures.h
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The s2idle MMIO quirk uses a scratch register in the FCH.
Adjust the code to clarify that.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Cc: Yazen Ghannam <yazen.ghannam@amd.com>
Cc: platform-driver-x86@vger.kernel.org
Link: https://lore.kernel.org/r/20250422234830.2840784-5-superm1@kernel.org
|
|
When an APU exits HW sleep with no active wake sources the Linux kernel will
rapidly assert that the APU can enter back into HW sleep. This happens in a
few ms. Contrasting this to Windows, Windows can take 10s of seconds to
enter back into the resiliency phase for Modern Standby.
For some situations this can be problematic because it can cause leakage
from VDDCR_SOC to VDD_MISC and force VDD_MISC outside of the electrical
design guide specifications. On some designs this will trip the over
voltage protection feature (OVP) of the voltage regulator module, but it
could cause APU damage as well.
To prevent this risk, add an explicit sleep call so that future attempts
to enter into HW sleep will have enough time to settle. This will occur
while the screen is dark and only on cases that the APU should enter HW
sleep again, so it shouldn't be noticeable to any user.
Cc: stable@vger.kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20250414162446.3853194-1-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Collect AMD specific platform header files in <asm/amd/*.h>.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mario Limonciello <superm1@kernel.org>
Link: https://lore.kernel.org/r/20250413084144.3746608-7-mingo@kernel.org
|
|
Collect AMD specific platform header files in <asm/amd/*.h>.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mario Limonciello <superm1@kernel.org>
Link: https://lore.kernel.org/r/20250413084144.3746608-4-mingo@kernel.org
|
|
Call pci_dev_put(rdev) before returning.
Fixes: 6ad1b2dc0f2a ("platform/x86/amd/pmc: Use managed APIs for mutex")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/65e2fffb-a1cb-4297-b725-661d6b790a05@stanley.mountain
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Adopt managed devm_* APIs for handling mutex creation and deletion,
facilitating automatic resource cleanup.
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20250305142615.410178-4-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Enhance code readability by fixing line break and blank line
inconsistencies.
Also make the return variable "rc" as function level local.
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20250305142615.410178-3-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
To improve the code organization and readability, move the macros and
structures from the AMD PMC driver to the PMC header file.
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20250305142615.410178-2-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Some of the AMD platforms do not support modern standby, so when such
CPU ID is detected, a warning message will be displayed to the user.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20250305142615.410178-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The `objs` suffix is reserved for user-space tools. Use the `y` suffix
instead, which is usually used for kernel drivers.
While at it, fix alignment in AMD PMC and PMF Makefiles.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250218194113.26589-3-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
"acer-wmi:
- Add support for PH14-51, PH16-72, and Nitro AN515-58
- Add proper hwmon support
- Improve error handling when reading "gaming system info"
- Replace direct EC reads for the current platform profile with WMI
calls to handle EC address variations
- Replace custom platform_profile cycling with the generic one
ACPI:
- platform_profile: Major refactoring and improvements
- Support registering multiple platform_profile handlers concurrently
to avoid the need to quirk which handler takes precedence
- Support reporting "custom" profile for cases where the current
profile is ambiguous or when settings tweaks are done outside the
pre-defined profile
- Abstract and layer platform_profile API better using the class_dev
and drvdata
- Various minor improvements
- Add Documentation and kerneldoc
amd/hsmp:
- Add support for HSMP protocol v7
amd/pmc:
- Support AMD 1Ah family 70h
- Support STB with Ryzen desktop SoCs
amd/pmf:
- Support Custom BIOS inputs for PMF TA
- Support passing SRA sensor data from AMD SFH (HID) to PMF TA
dell-smo8800:
- Move SMO88xx quirk away from the generic i2c-i801 driver
- Add accelerometer support for Dell Latitude E6330/E6430 and XPS
9550
- Support probing accelerometer for models yet to be listed in the
DMI mapping table because ACPI lacks i2c-address for the
accelerometer (behind a module parameter because probing might be
dangerous)
HID:
- amd_sfh: Add support for exporting SRA sensor data
hp-wmi:
- Add fan and thermal support for Victus 16-s1000
input:
- Add key for phone linking
- i8042: Add context for the i8042 filter to enable cleaning up the
filter related global variables from pdx86 drivers
lenovo-wmi-camera:
- Use SW_CAMERA_LENS_COVER instead of KEY_CAMERA_ACCESS
mellanox mlxbf-pmc:
- Add support for monitoring cycle count
- Add Documentation
thinkpad_acpi:
- Add support for phone link key
tools/power/x86/intel-speed-select:
- Fix Turbo Ratio Limit restore
x86-android-tables:
- Add support for Vexia EDU ATLA 10 Bluetooth and EC battery driver
And miscellaneous cleanups / refactoring / improvements"
* tag 'platform-drivers-x86-v6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (133 commits)
platform/x86: acer-wmi: Fix initialization of last_non_turbo_profile
platform/x86: acer-wmi: Ignore AC events
platform/mellanox: mlxreg-io: use sysfs_emit() instead of sprintf()
platform/mellanox: mlxreg-hotplug: use sysfs_emit() instead of sprintf()
platform/mellanox: mlxbf-bootctl: use sysfs_emit() instead of sprintf()
platform/x86: hp-wmi: Add fan and thermal profile support for Victus 16-s1000
ACPI: platform_profile: Add a prefix to log messages
ACPI: platform_profile: Add documentation
ACPI: platform_profile: Clean platform_profile_handler
ACPI: platform_profile: Move platform_profile_handler
ACPI: platform_profile: Remove platform_profile_handler from exported symbols
platform/x86: thinkpad_acpi: Use devm_platform_profile_register()
platform/x86: inspur_platform_profile: Use devm_platform_profile_register()
platform/x86: hp-wmi: Use devm_platform_profile_register()
platform/x86: ideapad-laptop: Use devm_platform_profile_register()
platform/x86: dell-pc: Use devm_platform_profile_register()
platform/x86: asus-wmi: Use devm_platform_profile_register()
platform/x86: amd: pmf: sps: Use devm_platform_profile_register()
platform/x86: acer-wmi: Use devm_platform_profile_register()
platform/surface: surface_platform_profile: Use devm_platform_profile_register()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 updates from Borislav Petkov:
- The first part of a restructuring of AMD's representation of a
northbridge which is legacy now, and the creation of the new AMD node
concept which represents the Zen architecture of having a collection
of I/O devices within an SoC. Those nodes comprise the so-called data
fabric on Zen.
This has at least one practical advantage of not having to add a PCI
ID each time a new data fabric PCI device releases. Eventually, the
lot more uniform provider of data fabric functionality amd_node.c
will be used by all the drivers which need it
- Smaller cleanups
* tag 'x86_misc_for_v6.14_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/amd_node: Use defines for SMN register offsets
x86/amd_node: Remove dependency on AMD_NB
x86/amd_node: Update __amd_smn_rw() error paths
x86/amd_nb: Move SMN access code to a new amd_node driver
x86/amd_nb, hwmon: (k10temp): Simplify amd_pci_dev_to_node_id()
x86/amd_nb: Simplify function 3 search
x86/amd_nb: Use topology info to get AMD node count
x86/amd_nb: Simplify root device search
x86/amd_nb: Simplify function 4 search
x86: Start moving AMD node functionality out of AMD_NB
x86/amd_nb: Clean up early_is_amd_nb()
x86/amd_nb: Restrict init function to AMD-based systems
x86/mtrr: Rename mtrr_overwrite_state() to guest_force_mtrr_state()
|
|
Merged the 'fixes' branch into the 'for-next' branch to resolve
a conflict in alienware-wmi zone teardown code.
|
|
SMN access was bolted into amd_nb mostly as convenience. This has
limitations though that require incurring tech debt to keep it working.
Move SMN access to the newly introduced AMD Node driver.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> # pdx86
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> # PMF, PMC
Link: https://lore.kernel.org/r/20241206161210.163701-11-yazen.ghannam@amd.com
|
|
Wakeup for IRQ1 should be disabled only in cases where i8042 had
actually enabled it, otherwise "wake_depth" for this IRQ will try to
drop below zero and there will be an unpleasant WARN() logged:
kernel: atkbd serio0: Disabling IRQ1 wakeup source to avoid platform firmware bug
kernel: ------------[ cut here ]------------
kernel: Unbalanced IRQ 1 wake disable
kernel: WARNING: CPU: 10 PID: 6431 at kernel/irq/manage.c:920 irq_set_irq_wake+0x147/0x1a0
The PMC driver uses DEFINE_SIMPLE_DEV_PM_OPS() to define its dev_pm_ops
which sets amd_pmc_suspend_handler() to the .suspend, .freeze, and
.poweroff handlers. i8042_pm_suspend(), however, is only set as
the .suspend handler.
Fix the issue by call PMC suspend handler only from the same set of
dev_pm_ops handlers as i8042_pm_suspend(), which currently means just
the .suspend handler.
To reproduce this issue try hibernating (S4) the machine after a fresh boot
without putting it into s2idle first.
Fixes: 8e60615e8932 ("platform/x86/amd: pmc: Disable IRQ1 wakeup for RN/CZN")
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Link: https://lore.kernel.org/r/c8f28c002ca3c66fbeeb850904a1f43118e17200.1736184606.git.mail@maciej.szmigiero.name
[ij: edited the commit message.]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Instead of using the `goto label; mutex_unlock()` pattern use
`guard(mutex)` which will release the mutex when it goes out of scope.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20241217194027.1189038-2-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Previously, AMD's Ryzen Desktop SoCs did not include support for STB.
However, to accommodate this recent change, PMFW has implemented a new
message port pair mechanism for handling messages, arguments, and
responses, specifically designed for distinguishing from Mobile SoCs.
Therefore, it is necessary to update the driver to properly handle this
incoming change.
Add a new function amd_stb_update_args() to simply the arguments that
needs to be passed between S2D supported Mobile SoCs vs Desktop SoCs.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20241108070822.3912689-10-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
AMD's 1Ah family 70h model uses a different S2D (Spill to DRAM) message
ID. Update the driver with this information.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20241108070822.3912689-9-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The latest AMD processors include additional IP blocks that must be turned
off before transitioning to low power. PMFW provides an interface to
retrieve debug information from each IP block, which is useful for
diagnosing issues if the system fails to enter or exit low power states,
or for profiling which IP block takes more time. Add support for using
this information within the driver.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20241108070822.3912689-8-Shyam-sundar.S-k@amd.com
[ij: grouped active_ips, ips_ptr, and num_ips next to each other.]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Instead of manually specifying num_ips, use ARRAY_SIZE() to set this value
based on the actual number of elements in the array.
Reviewed-by: Ilpo Jarvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20241108070822.3912689-7-Shyam-sundar.S-k@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Since S2D (Spill to DRAM) uses different message port offsets compared to
PMC message offsets for communication with PMFW, relocate the S2D macros
from pmc.c to a new file, mp1_stb.c, for better code organization.
Following this change, it is logical to introduce a new structure,
"struct stb_arg," to pass the message, argument, and response offset
details to PMFW via the amd_pmc_send_cmd() call. Additionally, move the
s2d_msg_id member from amd_pmc_dev into the new structure.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20241108070822.3912689-6-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
To distinguish between the PMC message port and the S2D (Spill to DRAM)
message port, replace the use of 0 and 1 with an enum.
To avoid printing the S2D or PMC port multiple times in debug print,
add new routine to retrieve the message port information, which can be
used to print the right msg_port getting used.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20241108070822.3912689-5-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
With STB now in a separate file, update the function names to match the
correct naming schema by removing the _pmc_ prefix where needed.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20241108070822.3912689-4-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
organization
As the SoC evolves with each generation, the dynamics between the PMC and
STB layers within the PMC driver are becoming increasingly complex, making
it challenging to manage both in a single file and maintain code
readability.
Additionally, during silicon bringup, the PMC functionality is often
enabled first, with STB functionality added later. This can lead to missed
updates in the driver, potentially causing issues.
To address these challenges, it's beneficial to move all STB-related
changes to a separate file. This approach will better accommodate newer
SoCs, provide improved flexibility for desktop variants, and facilitate
the collection of additional debug information through STB mechanisms.
Also the additional checks for entering s2d_init have been moved from
the PMC probe to amd_pmc_s2d_init(). This adjustment makes more sense
following the transfer of code to the separate mp1_stb.c file.
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20241108070822.3912689-3-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Transfer the support for STB-related file operations to the
amd_pmc_s2d_init() function, thereby consolidating the STB and S2D
(Spill to DRAM) functionality in one location. Also, relocate the
call to amd_pmc_s2d_init() to occur after the creation of the
"amd_pmc" debugfs directory. This ensures that the driver's root debugfs
directory is established beforehand.
For older platforms that supported S2D, exit immediately after creating
debugfs. These platforms may not support the PMFW messages available on
newer platforms. This adjustment is necessary due to the relocation of
debugfs creation into amd_pmc_s2d_init().
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20241108070822.3912689-2-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
- alienware WMAX thermal interface support
- Split ACPI and platform device based amd/hsmp drivers
- AMD X3D frequency/cache mode switching support
- asus thermal policy fixes
- Disable C1 auto-demotion in suspend to allow entering the deepest
C-states
- Fix volume buttons on Thinkpad X12 Detachable Tablet Gen 1
- Replace intel_scu_ipc "workaround" with 32-bit IO
- Correct *_show() function error handling in panasonic-laptop
- Gemini Lake P2SB devfn correction
- think-lmi Admin/System certificate authentication support
- Disable WMI devices for shutdown, refactoring continues
- Vexia EDU ATLA 10 tablet support
- Surface Pro 9 5G (Arm/QCOM) support
- Misc cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (69 commits)
platform/x86: p2sb: Cache correct PCI bar for P2SB on Gemini Lake
platform/x86: panasonic-laptop: Return errno correctly in show callback
Documentation: alienware-wmi: Describe THERMAL_INFORMATION operation 0x02
alienware-wmi: create_thermal_profile() no longer brute-forces IDs
alienware-wmi: Adds support to Alienware x17 R2
alienware-wmi: extends the list of supported models
alienware-wmi: order alienware_quirks[] alphabetically
platform/x86/intel/pmt: allow user offset for PMT callbacks
platform/x86/amd/hsmp: Change the error type
platform/x86/amd/hsmp: Add new error code and error logs
platform/x86/amd: amd_3d_vcache: Add sysfs ABI documentation
platform/x86/amd: amd_3d_vcache: Add AMD 3D V-Cache optimizer driver
intel-hid: fix volume buttons on Thinkpad X12 Detachable Tablet Gen 1
platform/x86/amd/hsmp: mark hsmp_msg_desc_table[] as maybe_unused
platform/x86: asus-wmi: Use platform_profile_cycle()
platform/x86: asus-wmi: Fix inconsistent use of thermal policies
platform/x86: hp: hp-bioscfg: remove redundant if statement
MAINTAINERS: Update ISHTP ECLITE maintainer entry
platform/x86: x86-android-tablets: Add support for Vexia EDU ATLA 10 tablet
platform/x86: x86-android-tablets: Add support for getting i2c_adapter by PCI parent devname()
...
|
|
Loading the amd_pmc module as:
amd_pmc enable_stb=1
...can result in the following messages in the kernel ring buffer:
amd_pmc AMDI0009:00: SMU cmd failed. err: 0xff
ioremap on RAM at 0x0000000000000000 - 0x0000000000ffffff
WARNING: CPU: 10 PID: 2151 at arch/x86/mm/ioremap.c:217 __ioremap_caller+0x2cd/0x340
Further debugging reveals that this occurs when the requests for
S2D_PHYS_ADDR_LOW and S2D_PHYS_ADDR_HIGH return a value of 0,
indicating that the STB is inaccessible. To prevent the ioremap
warning and provide clarity to the user, handle the invalid address
and display an error message.
Link: https://lore.kernel.org/platform-driver-x86/c588ff5d-3e04-4549-9a86-284b9b4419ba@amd.com
Fixes: 3d7d407dfb05 ("platform/x86: amd-pmc: Add support for AMD Spill to DRAM STB feature")
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Corey Hickey <bugfood-c@fatooh.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20241028180241.1341624-1-bugfood-ml@fatooh.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/platform/x86/ to use
.remove(), with the eventual goal to drop struct
platform_driver::remove_new(). As .remove() and .remove_new() have the
same prototypes, conversion is done by just changing the structure
member name in the driver initializer.
While touching these files, make indention of the struct initializer
consistent in several files.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20241017073802.53235-2-u.kleine-koenig@baylibre.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
PMC driver has capability to get the idle mask values and STB data from
the PMFW. Extend this support to the platforms that belong to family 1Ah
model 60h series.
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20240822095357.395808-2-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The commit 426463d94d45 ("platform/x86/amd/pmc: Send OS_HINT command for
new AMD platform") was introduced to enable sending mailbox commands to
PMFW on newer platforms. However, it was later discovered that the commit
did not configure the correct message port ID (i.e., S2D or PMC). Without
this configuration, all command submissions to PMFW are treated as
invalid, leading to command failures.
To address this issue, the CPU ID association for the new platform needs
to be added in amd_pmc_get_ip_info(). This ensures that the correct SMU
port IDs are selected.
Fixes: 426463d94d45 ("platform/x86/amd/pmc: Send OS_HINT command for new AMD platform")
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20240822095357.395808-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
To initiate the HW deep state transition, the OS_HINT command has to be
sent to the PMFW. Add this support to the platforms that belong to family
1Ah model 60h series.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240718150119.3427190-1-Shyam-sundar.S-k@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- New drivers/platform/arm64 directory for arm64 embedded-controller
drivers
- New drivers:
- Acer Aspire 1 embedded controllers (for arm64 models)
- ACPI quickstart PNP0C32 buttons
- Dell All-In-One backlight support (dell-uart-backlight)
- Lenovo WMI camera buttons
- Lenovo Yoga Tablet 2 Pro 1380F/L fast charging
- MeeGoPad ANX7428 Type-C Cross Switch (power sequencing only)
- MSI WMI sensors (fan speed sensors only for now)
- Asus WMI:
- 2024 ROG Mini-LED support
- MCU powersave support
- Vivobook GPU MUX support
- Misc. other improvements
- Ideapad laptop:
- Export FnLock LED as LED class device
- Switch platform profiles using thermal management key
- Intel drivers:
- IFS: various improvements
- PMC: Lunar Lake support
- SDSI: various improvements
- TPMI/ISST: various improvements
- tools: intel-speed-select: various improvements
- MS Surface drivers:
- Fan profile switching support
- Surface Pro thermal sensors support
- ThinkPad ACPI:
- Reworked hotkey support to use sparse keymaps
- Add support for new trackpoint-doubletap, Fn+N and Fn+G hotkeys
- WMI core:
- New WMI driver development guide
- x86 Android tablets:
- Lenovo Yoga Tablet 2 Pro 1380F/L support
- Xiaomi MiPad 2 status LED and bezel touch buttons backlight
support
- Miscellaneous cleanups / fixes / improvements
* tag 'platform-drivers-x86-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (128 commits)
platform/x86: Add new MeeGoPad ANX7428 Type-C Cross Switch driver
devm-helpers: Fix a misspelled cancellation in the comments
tools arch x86: Add dell-uart-backlight-emulator
platform/x86: Add new Dell UART backlight driver
platform/x86: x86-android-tablets: Create LED device for Xiaomi Pad 2 bottom bezel touch buttons
platform/x86: x86-android-tablets: Xiaomi pad2 RGB LED fwnode updates
platform/x86: x86-android-tablets: Pass struct device to init()
platform/x86/amd: pmc: Add new ACPI ID AMDI000B
platform/x86/amd: pmf: Add new ACPI ID AMDI0105
platform/x86: p2sb: Don't init until unassigned resources have been assigned
platform/surface: aggregator: Log critical errors during SAM probing
platform/x86: ISST: Support SST-BF and SST-TF per level
platform/x86/fujitsu-laptop: Replace sprintf() with sysfs_emit()
tools/power/x86/intel-speed-select: v1.19 release
tools/power/x86/intel-speed-select: Display CPU as None for -1
tools/power/x86/intel-speed-select: SST BF/TF support per level
tools/power/x86/intel-speed-select: Increase number of CPUs displayed
tools/power/x86/intel-speed-select: Present all TRL levels for turbo-freq
tools/power/x86/intel-speed-select: Fix display for unsupported levels
tools/power/x86/intel-speed-select: Support multiple dies
...
|
|
Add new ACPI ID AMDI000B used by upcoming AMD platform to the PMC
supported list of devices.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20240510103946.877307-1-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add depended header file to fix error on i386 due to implicit declaration
of function ‘writeq’.
Fixes: 2dc77993cb5e ("platform/x86/amd/pmc: Add AMD MP2 STB functionality")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404160320.QAHyZ0c3-lkp@intel.com/
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/r/20240416025312.731809-1-Basavaraj.Natikar@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
BIOS 03.05 still hasn't fixed the spurious IRQ1 issue. As it's still
being worked on there is still a possibility that it won't need to
apply to future BIOS releases.
Add a quirk for BIOS 03.05 as well.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240410141046.433-1-mario.limonciello@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
AMD MP2 STB function provides a data buffer used to log debug information
about the system execution during S2Idle suspend/resume.
A data buffer known as the STB (Smart Trace Buffer) is a circular buffer
which is a low-level log to assist in debugging by providing insights
into any potential hangs or stalls that may occur during the S2Idle
suspend/resume processes.
The current PMC driver retrieves STB data from MP1, but there can be
scenarios where MP1 might hang or become unresponsive, leading to the
loss of critical data present in the STB buffer. This defeats the purpose
of the STB buffer, which was originally meant to help identify system
failures.
This feature creates stb_read_previous_boot debugfs allows users to
retrieve the STB log from MP2 specifically from the last occurrence of
the S2Idle suspend/resume. A userspace daemon can access STB log of last
S2Idle suspend/resume which can help to troubleshoot potential issues
related to hangs or stalls during the S2Idle suspend/resume sequence.
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/r/20240404090702.325838-1-Basavaraj.Natikar@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The latest platforms use a different SMU message port(0x938) from the one
currently being used (0x538). Make code changes to adapt to this new
information.
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231228102104.1785383-7-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
AMD newer platforms, (AMDI000A or family 1Ah series) also supports the STB
functionality. Add this to amd_pmc_is_stb_supported().
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231228102104.1785383-6-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Idlemask is an indication of each IP block current state (i.e. whether it
is running or idle) during s2idle transistion. The newer 1Ah family
supports this feature, add it to the support list.
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231228102104.1785383-5-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
In the current code, amd_pmc_get_ip_info() is being called from
amd_pmc_s2d_init() and that code block gets enabled only when the STB is
being enabled.
But the information from amd_pmc_get_ip_info() will be required outside of
STB usecase. Hence move this call into driver probe sequence.
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231228102104.1785383-4-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Latest AMD SoCs has VPE (Video Processing Engine) IP block and the
statistics related to this IP can be obtained as a part of metrics table
information that the PMFW propogates. Add this support for 1Ah family
series.
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231228102104.1785383-3-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
To initiate the HW deep state transistion the OS_HINT command has to be
sent the PMFW. Add this support to the platforms that has AMDI000A
support.
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231228102104.1785383-2-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The Laptop 13 (AMD Ryzen 7040Series) BIOS 03.03 has a workaround
included in the EC firmware that will cause the EC to emit a "spurious"
keypress during the resume from s0i3 [1].
This series of keypress events can be observed in the kernel log on
resume.
```
atkbd serio0: Unknown key pressed (translated set 2, code 0x6b on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 6b <keycode>' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0x6b on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 6b <keycode>' to make it known.
```
In some user flows this is harmless, but if a user has specifically
suspended the laptop and then closed the lid it will cause the laptop
to wakeup. The laptop wakes up because the ACPI SCI triggers when
the lid is closed and when the kernel sees that IRQ1 is "also" active.
The kernel can't distinguish from a real keyboard keypress and wakes the
system.
Add the model into the list of quirks to disable keyboard wakeup source.
This is intentionally only matching the production BIOS version in hopes
that a newer EC firmware included in a newer BIOS can avoid this behavior.
Cc: Kieran Levin <ktl@framework.net>
Link: https://github.com/FrameworkComputer/EmbeddedController/blob/lotus-zephyr/zephyr/program/lotus/azalea/src/power_sequence.c#L313 [1]
Link: https://community.frame.work/t/amd-wont-sleep-properly/41755
Link: https://community.frame.work/t/tracking-framework-amd-ryzen-7040-series-lid-wakeup-behavior-feedback/39128
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20231212045006.97581-5-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|